May F/S Thread
#1
Mr. Badwrench
Thread Starter
Join Date: May 2002
Location: stranger in a strange land
Posts: 14,146
Likes: 0
Received 2 Likes
on
2 Posts
May F/S Thread
Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.
From this point on, 1-1-2010, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings
EVERYTHING HAS TO HAVE PICS NO exceptions
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.
From this point on, 1-1-2010, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings
EVERYTHING HAS TO HAVE PICS NO exceptions
#2
Honda-Tech Member
Join Date: Jul 2008
Location: PALMDALE, CA, US
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
Re: May F/S Thread
Almost new Exedy twin for B-tranny.no street or track use,dyno only. $950 shipped obo SOLD!!!
New STR polished H-tranny scatter shield. $250 obo
B-series S2 Pro1 cams MINT. $500 obo SOLD!!!
New STR polished H-tranny scatter shield. $250 obo
B-series S2 Pro1 cams MINT. $500 obo SOLD!!!
Last edited by 1FASTHF; 05-31-2011 at 06:10 PM. Reason: pictures
#4
Honda-Tech Member
Join Date: Nov 2003
Location: Tampa, FL, usa
Posts: 1,135
Likes: 0
Received 0 Likes
on
0 Posts
Re: May F/S Thread
B-series Pro1 cams 450 shipped only used for couple dyno sessions
These are great
Sold Sold Sold Sold Sold
These are great
Sold Sold Sold Sold Sold
Last edited by xsi-t; 05-29-2011 at 08:08 PM.
#5
Honda-Tech Member
Re: May F/S Thread
I have for sale a Bullseye power S372R turbo. It has very few miles on it. Only about 1200 on my 2JZ engine at about 550whp on 12psi. That is all it has seen. It is MINT condition. No shaft play, no oil, Always ran with a filter. It has the optional Race cover that is polished. It is a t4 1.25 divided exhaust housing.
Price: $925 shipped
HKS 60mm GT wastegate with flange for manifold and dumptube. It was rebuilt a couple thousand miles ago. It is by far the best wastegate I have ever had. It will hold low boost even on a huge turbo with out ANY creep. These cost about 900$ new.
Price: $395 shipped
BEST WAY TO CONTACT ME IS EMAIL! turborobo@gmail.com I dont come on hondatech much anymore so please please email me.
Price: $925 shipped
HKS 60mm GT wastegate with flange for manifold and dumptube. It was rebuilt a couple thousand miles ago. It is by far the best wastegate I have ever had. It will hold low boost even on a huge turbo with out ANY creep. These cost about 900$ new.
Price: $395 shipped
BEST WAY TO CONTACT ME IS EMAIL! turborobo@gmail.com I dont come on hondatech much anymore so please please email me.
Last edited by Rob!; 05-01-2011 at 02:46 PM.
#6
Honda-Tech Member
Join Date: Dec 2007
Location: Troy, MO
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
Re: May F/S Thread
Brand new NLR ams 1000 boost controller $775
1 ATP cast intercooler end tank. 12x3.5" $40
this picture is used from atp's website, I have only 1
RC 1000cc injector(used) with new pigtails and honda resistor box, 14mm rail and head size $200
3.5" vibrant alum v-band assembly new out of package without the oring $50
4" vibrant alum v-band assembly new not opened $60
1 ATP cast intercooler end tank. 12x3.5" $40
this picture is used from atp's website, I have only 1
RC 1000cc injector(used) with new pigtails and honda resistor box, 14mm rail and head size $200
3.5" vibrant alum v-band assembly new out of package without the oring $50
4" vibrant alum v-band assembly new not opened $60
#7
Honda-Tech Member
Join Date: Jun 2007
Location: Elyria, Ohio
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Re: May F/S Thread
I have a GSR gearset that i took out of my car before i upgraded to the Mfactory set, everything looks perfect. Has about 30,000 on it. Looking to get 300.00 shipped or just shoot me an offer. Thanks. I have plenty of picture if you need more.
Trending Topics
#8
Honda-Tech Member
Join Date: Mar 2001
Location: Phoenix, AZ, USA
Posts: 2,708
Likes: 0
Received 0 Likes
on
0 Posts
Re: May F/S Thread
AEM Series 2 (part number 30-6040), new in box, fits Honda/Acura with OBD1 ECU plugs. $940 shipped in the continental US.
Brand new RC 550cc K-series injector set, never used, only opened box to take picture. $265 shipped.
Brand New Spec Twin Disc setup, for K-series, part number SA00MT2. Rated to handle 800 ft lbs of torque, which is more than any Honda I've ever dyno tuned, lol. Includes everything show in pic. $1050 shipped.
joe@locashracing.com for more info.
Brand new RC 550cc K-series injector set, never used, only opened box to take picture. $265 shipped.
Brand New Spec Twin Disc setup, for K-series, part number SA00MT2. Rated to handle 800 ft lbs of torque, which is more than any Honda I've ever dyno tuned, lol. Includes everything show in pic. $1050 shipped.
joe@locashracing.com for more info.
#9
Re: May F/S Thread
-K24 Manley turbo tuff rods with big bolts $600
-K24 Wiseco 10:1 pistons with upgraded wrist pins $500
(Both pistons and rods for $900. Will have pics when they come out of my motor.)
-6" race muffler $60
-K20 head $1300(head needs milled but the valvetrain and cams are in great shape)
supertech full valvetrain($500). Stainless Nitride coated intake valves. Inconel exhaust valves. All standard size. Seats from supertech as well. Ep3 cut rockers for single lobe and Drag Cartel drop in cams cut to single lobe($1000).
-Polished K series scatter shield $150
-K24 crank $150
Hybrid K series Solid Mounts for EK brand new $450
-K24 Wiseco 10:1 pistons with upgraded wrist pins $500
(Both pistons and rods for $900. Will have pics when they come out of my motor.)
-6" race muffler $60
-K20 head $1300(head needs milled but the valvetrain and cams are in great shape)
supertech full valvetrain($500). Stainless Nitride coated intake valves. Inconel exhaust valves. All standard size. Seats from supertech as well. Ep3 cut rockers for single lobe and Drag Cartel drop in cams cut to single lobe($1000).
-Polished K series scatter shield $150
-K24 crank $150
Hybrid K series Solid Mounts for EK brand new $450
#10
Honda-Tech Member
iTrader: (5)
Re: May F/S Thread
I just had these custom made from fabworx fabrication in SC. NOT the bad rep fab-worx sponsor on here.
they do excellent work, what lead me to go with them was their titanium manifold build here:
https://honda-tech.com/forums/welding-fabrication-53/finally-titanium-turbo-manifold-pics-2682960/
This manifold is t3 flanged, with a passenger exit downpipe(5 bolt flanged), 44mm wastegate flange(with dumptube).
It is all brand new, ready to ship. I decided to go with a different style manifold is the only reason im selling. Im asking $830 shipped anywhere in the con 48 states
they do excellent work, what lead me to go with them was their titanium manifold build here:
https://honda-tech.com/forums/welding-fabrication-53/finally-titanium-turbo-manifold-pics-2682960/
This manifold is t3 flanged, with a passenger exit downpipe(5 bolt flanged), 44mm wastegate flange(with dumptube).
It is all brand new, ready to ship. I decided to go with a different style manifold is the only reason im selling. Im asking $830 shipped anywhere in the con 48 states
#11
Re: May F/S Thread
F/S Tilton Clutch Master Adapter part number 72-001.(Plate for bolting up aftermarket clutch master cylinders, such as Tilton and wellwood). Comes with plate, bolts and clevis, seal new in bag
40 Shipped OBO
40 Shipped OBO
#12
Honda-Tech Member
Join Date: Dec 2008
Location: dirty dallas
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Re: May F/S Thread
Weld imports brand new maybe 3 passes on them with brand new mickey thompson 24.5 slicks..wheels are clean... You can text me at 214 576 6367 ....price is $800 plus shipping + Also have dss 5.9 axles with hubs $1000 pics will be up soon
Last edited by therunnerz; 05-03-2011 at 08:44 AM.
#13
Honda-Tech Member
Join Date: Sep 2003
Location: Huntingtown, MD, USA
Posts: 698
Likes: 0
Received 0 Likes
on
0 Posts
Re: May F/S Thread
F/S F.A.S.T. system with data logger, harness, MSD 7 Al 2 plus, msd coil, MSD rpm switch, msd 3 step and modified b series vtec dizzy. $1100 everything is in working order
If you want pictures send me your email address and ill send them to you.
If you want pictures send me your email address and ill send them to you.
#14
Re: May F/S Thread
darton block b18a fresh from machine shop its 84.5 with ls crank Honda bearings i have eagle rods for it no pistons $1500
NRG tech vtech killer cams and roller rockers $2500 0b0 got them from rota92
2 Direct port NOS setups with full 10lb bottle $450 each
Inline pro GSR intake manifold $500 obo
scat 95mm crank $300
deley box brand new $300
B16 0bd2 $100
OBD1 p13 ECU $100
(856) 332 5450 text me for pics ill try to post them up
NRG tech vtech killer cams and roller rockers $2500 0b0 got them from rota92
2 Direct port NOS setups with full 10lb bottle $450 each
Inline pro GSR intake manifold $500 obo
scat 95mm crank $300
deley box brand new $300
B16 0bd2 $100
OBD1 p13 ECU $100
(856) 332 5450 text me for pics ill try to post them up
Last edited by MoiMotorsports; 05-09-2011 at 10:22 AM.
#15
Re: May F/S Thread
contact tony 714-656-6617
well seems like fully built car is hard to sell now and days so im deciding just to part it out. Im selling if i have enough buyers for each part.
GSR P72 Head ported. polished. crower valves springs and retainers. oversized ferrea valves. ($1100)
1500 miles B18C1 Block. RS sleeved 84MM. arias 9.7-1 pistons, Eagle Rods with ARP bolts. ACL race Bearings. Type R pully/oil pump/water pump/ GSR crank balanced @ rs. ($1900)
Garret GT35R Turbo ($800)
FullRace Ram Horn + 4 bolt Down Pipe ($600)
will sell full turbo kit for ($2000) including pipings intercooler wastegate and bov.
Victor X GSR intake manifold ($300)
HKS SSQV BOV ($150)
Tial 44MM WasteGate ($275)
RC 750CC injectors ($250)
MSD kit + Dizzy ($300)
Greddy GSR timing belt ($100)
GSR Tranny with Kaaz lsd and carbon synchro ($1000)
ACT Stage 4 clutch + ACT race pressure plate + ACT race Fly wheel ($500)
AEM Fuel Rail + Fuel pressure regulater ($175)
Clean Title Complete Ek Coupe shell. ($2000)
well seems like fully built car is hard to sell now and days so im deciding just to part it out. Im selling if i have enough buyers for each part.
GSR P72 Head ported. polished. crower valves springs and retainers. oversized ferrea valves. ($1100)
1500 miles B18C1 Block. RS sleeved 84MM. arias 9.7-1 pistons, Eagle Rods with ARP bolts. ACL race Bearings. Type R pully/oil pump/water pump/ GSR crank balanced @ rs. ($1900)
Garret GT35R Turbo ($800)
FullRace Ram Horn + 4 bolt Down Pipe ($600)
will sell full turbo kit for ($2000) including pipings intercooler wastegate and bov.
Victor X GSR intake manifold ($300)
HKS SSQV BOV ($150)
Tial 44MM WasteGate ($275)
RC 750CC injectors ($250)
MSD kit + Dizzy ($300)
Greddy GSR timing belt ($100)
GSR Tranny with Kaaz lsd and carbon synchro ($1000)
ACT Stage 4 clutch + ACT race pressure plate + ACT race Fly wheel ($500)
AEM Fuel Rail + Fuel pressure regulater ($175)
Clean Title Complete Ek Coupe shell. ($2000)
Last edited by Mrxsandstorm; 05-05-2011 at 11:36 AM.
#16
Re: May F/S Thread
wilwood civic brake kit. COMPLETE. asking 650 BNIB
m&w plug and play harness. asking 500 USED
k20 cp pistons 9.0:1 86mm with carrillo a-beams. asking 1000 BNIB
ferrea dual springs and seats. taking offers USED
k20 t3 log manifold 38mm wastegate. asking 200 BNIB
b-series coils from 600cc motorcycle. comes with all the hardware to install. asking $100 for all 4!! BNIB
K-Series ID1000s with all installation hardware. asking $400 BNIB
GTX4202 Dual Ball Bearing, Billet 11 blade wheel. Clipped to 72.5mm to pass Outlaw class inspections. Has 1.44 A/R. Cold side is powder coated black and the hot side is ceramic coated. Turbo made 1100 hp and only has 50 passes on it asking $1800 USED
5 Weldon Fuel Filters. asking $85 Each BNIB
EG/DC Avid K Swap Solid Mounts. All hardware included. asking $450 BNIB
m&w plug and play harness. asking 500 USED
k20 cp pistons 9.0:1 86mm with carrillo a-beams. asking 1000 BNIB
ferrea dual springs and seats. taking offers USED
k20 t3 log manifold 38mm wastegate. asking 200 BNIB
b-series coils from 600cc motorcycle. comes with all the hardware to install. asking $100 for all 4!! BNIB
K-Series ID1000s with all installation hardware. asking $400 BNIB
GTX4202 Dual Ball Bearing, Billet 11 blade wheel. Clipped to 72.5mm to pass Outlaw class inspections. Has 1.44 A/R. Cold side is powder coated black and the hot side is ceramic coated. Turbo made 1100 hp and only has 50 passes on it asking $1800 USED
5 Weldon Fuel Filters. asking $85 Each BNIB
EG/DC Avid K Swap Solid Mounts. All hardware included. asking $450 BNIB
#17
Honda-Tech Member
Re: May F/S Thread
New Prologger wideband O2 and boost controller. $400 shipped
Kens Kustom Chassis 10pt prebent roll cage. Never installed and includes d-bars. Fitment was in a DC2 chassis. $350 (pickup ONLY!!!) -PENDING
Ferrea valve springs and retainers. S10032 is the spring part number and E11003 is the titanium retainer. Good for 13.5mm lift (.534in) and 10,000rpm. $475 shipped
Intake manifold thermal gasket for GSR style head. $50 shipped
Kens Kustom Chassis 10pt prebent roll cage. Never installed and includes d-bars. Fitment was in a DC2 chassis. $350 (pickup ONLY!!!) -PENDING
Ferrea valve springs and retainers. S10032 is the spring part number and E11003 is the titanium retainer. Good for 13.5mm lift (.534in) and 10,000rpm. $475 shipped
Intake manifold thermal gasket for GSR style head. $50 shipped
Last edited by tepid1; 05-15-2011 at 07:18 AM. Reason: Sold more stuff
#18
Re: May F/S Thread
Got for sale brand new in the box parts. Prices are best offer and buyer pays shipping.
Percy's racing lexan window kit for 96-00 honda civic hatch. this is the deluxe model that has the borders around the window for the stock look. this is a pnp kit no cutting needed, comes with all hardware and gasket for install $900
Rci Fuel Cell, Drag Race Cell; Size 6 x 6 x 12; 1 Gallon $70
Waterman racing in-line fuel filters got 9 of them 5 -8 filters and 4 -6 filters $55 each
Fidanza racing light weight flywheel for b motor $80 SOLD
gm 3bar map $40
825HP Precision intercooler used but in good condition $400
M&H 28x10.5x15 New never mounted $250 (thats the price for one)
M&H 26x4.5x15 New never mounted Skinny's $250
Percy's racing lexan window kit for 96-00 honda civic hatch. this is the deluxe model that has the borders around the window for the stock look. this is a pnp kit no cutting needed, comes with all hardware and gasket for install $900
Rci Fuel Cell, Drag Race Cell; Size 6 x 6 x 12; 1 Gallon $70
Waterman racing in-line fuel filters got 9 of them 5 -8 filters and 4 -6 filters $55 each
Fidanza racing light weight flywheel for b motor $80 SOLD
gm 3bar map $40
825HP Precision intercooler used but in good condition $400
M&H 28x10.5x15 New never mounted $250 (thats the price for one)
M&H 26x4.5x15 New never mounted Skinny's $250
Last edited by Desir Performance; 05-13-2011 at 03:04 AM.
#20
Honda-Tech Member
iTrader: (1)
Re: May F/S Thread
Racing Gear All Stuff Minus the Jacket was tried on and never used
Willing to sell all together for $550 or seperate
G force Bag $75
G Force Gloves - $75
G Force Large Pants - $50
HJC Matte/Flat Black Helmet - $150
Rci Jacket - $60
G Force size 11 Shoes - $70
G Force Neck Roll - $25
Willing to sell all together for $550 or seperate
G force Bag $75
G Force Gloves - $75
G Force Large Pants - $50
HJC Matte/Flat Black Helmet - $150
Rci Jacket - $60
G Force size 11 Shoes - $70
G Force Neck Roll - $25
#21
Re: May F/S Thread
Franks Fiberglass "Hot-Rod" style front end tubed on inside -- Make offer
New D-series P-29 pistons- 100
cms spindle mounted 15x4.5- make offer
**prices does not include shipping and pay pal fees
Last edited by JamaicanDave; 05-08-2011 at 04:25 PM.
#22
Honda-Tech Member
Join Date: May 2007
Location: POMPANO BEACH, FL, broward
Posts: 833
Likes: 0
Received 0 Likes
on
0 Posts
Re: May F/S Thread
FULL PART OUT
its time to move on to other things i want to pursue in my life, everything is for sale
this se up made over 950+ hp but sadly only has 2 track passes on it, shell is an all original 99 si clean title with 40 k on it with a 10 point steel cage and parachute bracket
parts
turbo kit'
-6768 bb h cover t4 .96 1600$
-forward facing manifold,dp,dt ceramic coated 1000$
-precision 46 mm wastegate 235$
-tial q wastegate 205$
-fabworx 1000hp intercooler 499$
-intercooler piping 249$
-vibrant boost brace 40$
- 1600cc ford racing injectors (modified my efi wizard 1800cc)
package deal is 3500$
engine parts
-victor edelbrock intake mani ported 350$
-bennen fuel rail with 2 8an fittings 60$
-blox 76mm tb 199$
- ls crank 85$
- ls carillo rods 650$
-je 84 mm 11.1 pistons 299$
- jdm gsr block 84mm 850$
- jdm type r head lots of meat left supertech 85lbs sprins, supertech inconel valves fresh 0 miles - 800$
-new gsr oil pan 80$
-miller 505 web cams 699$
-blox cam gears 50$
G FORCE 2011 DOGBOX WITH WAVETRACK LSD , REINFORCED CASING , GFORCE SHIFTER
-4950$ TRANNY
-799$ SHIFTER
5500 PACKAGE DEAL
FUEL SYSTEM
custom 4.3 lbs 5 gallon fuel cell, dual bosh pumps, full 8an fittings with all lines 1200$
comp cutch twin 2 passes c -850$
PLENTY OF MORE JUST MESSAGE ME OR CALL 9548258754 EVERYTHINGS FOR SALE
its time to move on to other things i want to pursue in my life, everything is for sale
this se up made over 950+ hp but sadly only has 2 track passes on it, shell is an all original 99 si clean title with 40 k on it with a 10 point steel cage and parachute bracket
parts
turbo kit'
-6768 bb h cover t4 .96 1600$
-forward facing manifold,dp,dt ceramic coated 1000$
-precision 46 mm wastegate 235$
-tial q wastegate 205$
-fabworx 1000hp intercooler 499$
-intercooler piping 249$
-vibrant boost brace 40$
- 1600cc ford racing injectors (modified my efi wizard 1800cc)
package deal is 3500$
engine parts
-victor edelbrock intake mani ported 350$
-bennen fuel rail with 2 8an fittings 60$
-blox 76mm tb 199$
- ls crank 85$
- ls carillo rods 650$
-je 84 mm 11.1 pistons 299$
- jdm gsr block 84mm 850$
- jdm type r head lots of meat left supertech 85lbs sprins, supertech inconel valves fresh 0 miles - 800$
-new gsr oil pan 80$
-miller 505 web cams 699$
-blox cam gears 50$
G FORCE 2011 DOGBOX WITH WAVETRACK LSD , REINFORCED CASING , GFORCE SHIFTER
-4950$ TRANNY
-799$ SHIFTER
5500 PACKAGE DEAL
FUEL SYSTEM
custom 4.3 lbs 5 gallon fuel cell, dual bosh pumps, full 8an fittings with all lines 1200$
comp cutch twin 2 passes c -850$
PLENTY OF MORE JUST MESSAGE ME OR CALL 9548258754 EVERYTHINGS FOR SALE
#23
Re: May F/S Thread
All prices are without shipping or paypal fees. Will send pics
please text me with questions or to work a deal.. phone # (909)648-3810
LOWERED PRICES TO MOVE ITEMS
brand new never ran SYNAPSE turbo manifold t3/t4 $550 shippppped
brand new PRECISION t3/t4 turbo 6765 billet wheel h cover $950 shippedddddd
MOTOR::::: Everything is Brand new, Long block had a start-up when built by Bob McCray
H22 900 hp custom build motor
golden eagle fuel rail (Black Brand New) $100
BoB Mckray ported and polished head
ferrea valves and springs retainers
JE custom 9.5.1 dish pistons
Custom H-beam rods
Darton sleeved block
custom belt pulleys
motor blueprinted and balance by CLU
clevite bearings
Drive oil pump
moroso oil pan
fidanza enlighten flywheel
Scatter shield
brand new starter, alternator
hyper stage 6 clutch
heavy duty pressure plate
$3000 for motor and trans
2 sets of h22 to EG axles (hasport, Driveshop) $175 each
skunk2 pro rear lower control arms. $150
H22 EG Hasport motor mounts- $300
skunk2 70mm throttlebody (brand New) $250
4 bar map sensor $50
aeromotive fuel pressure reg $150 brand new still in package
Innovative lm-1 wideband $150
1680 cc injectors (bosch) $250 shipped
880 cc precision injectors included $150 shipped
http://i152.photobucket.com/albums/s...isionturbo.jpg
http://i152.photobucket.com/albums/s...sion1turbo.jpg
http://i152.photobucket.com/albums/s...n/4bffeb15.jpg
http://i152.photobucket.com/albums/s...n/0a07ce03.jpg
http://i152.photobucket.com/albums/s...n/IMG_0009.jpg
WILL TRADE all parts above FOR QUADS, SIDE BY SIDES, TERYX, RAZOR, RANGERS YFZ450, BANSHEE SAND RAILS. JUST ASK ME CAUSE I WANT TO MOVE THIS STUFF OUT OF MY SHOP.. THANKS
please text me with questions or to work a deal.. phone # (909)648-3810
LOWERED PRICES TO MOVE ITEMS
brand new never ran SYNAPSE turbo manifold t3/t4 $550 shippppped
brand new PRECISION t3/t4 turbo 6765 billet wheel h cover $950 shippedddddd
MOTOR::::: Everything is Brand new, Long block had a start-up when built by Bob McCray
H22 900 hp custom build motor
golden eagle fuel rail (Black Brand New) $100
BoB Mckray ported and polished head
ferrea valves and springs retainers
JE custom 9.5.1 dish pistons
Custom H-beam rods
Darton sleeved block
custom belt pulleys
motor blueprinted and balance by CLU
clevite bearings
Drive oil pump
moroso oil pan
fidanza enlighten flywheel
Scatter shield
brand new starter, alternator
hyper stage 6 clutch
heavy duty pressure plate
$3000 for motor and trans
2 sets of h22 to EG axles (hasport, Driveshop) $175 each
skunk2 pro rear lower control arms. $150
H22 EG Hasport motor mounts- $300
skunk2 70mm throttlebody (brand New) $250
4 bar map sensor $50
aeromotive fuel pressure reg $150 brand new still in package
Innovative lm-1 wideband $150
1680 cc injectors (bosch) $250 shipped
880 cc precision injectors included $150 shipped
http://i152.photobucket.com/albums/s...isionturbo.jpg
http://i152.photobucket.com/albums/s...sion1turbo.jpg
http://i152.photobucket.com/albums/s...n/4bffeb15.jpg
http://i152.photobucket.com/albums/s...n/0a07ce03.jpg
http://i152.photobucket.com/albums/s...n/IMG_0009.jpg
WILL TRADE all parts above FOR QUADS, SIDE BY SIDES, TERYX, RAZOR, RANGERS YFZ450, BANSHEE SAND RAILS. JUST ASK ME CAUSE I WANT TO MOVE THIS STUFF OUT OF MY SHOP.. THANKS
Last edited by vtec_killer_; 05-11-2011 at 08:26 AM.
#24
Honda-Tech Member
Join Date: Jul 2001
Location: Northeast, USA
Posts: 6,030
Likes: 0
Received 0 Likes
on
0 Posts
Re: May F/S Thread
Have a spare GSR crank that I didn't need. Out of a 1998 I believe. Never cut, polished, etc. Journals look great. $100.
Lou
THIS IS SOLD.
Lou
THIS IS SOLD.
Last edited by HybridKOOP; 05-06-2011 at 05:46 AM. Reason: SOLD
#25
Honda-Tech Member
Re: May F/S Thread
silver pro comp 2.1/16 water temp gauge 100-250 temp=30 bux
silver pro comp 2 1/16 0-100 oil psi gauge 40 bux
aem wide band gauge with new sensor 175 bux
silver sport comp monster tach 10,000 with adjustable rpm setting and external shift light=175 bux
phantom 2 1/16 0-100 psi mechanical fuel gauge 30 bux
phantom 2 1/16 30psi boost gauge 40 bux
96-00 civic 2 gauge cluster bezel 30 bux
autometer low oil psi pencil warning light with 15 psi sensor=40 bux
2 gauge pillar mount for 2 1/16 gauges fits 96- civic/integra =25 bux
00 civic si cluster 175 bux
aem 30-1020 ems for obd2 already setup for coil on plug with a few h22 turbo programs in it $600
ferrea roller rocker setup for h22 with h22 all motor roller cams mint like new $1500 or just sell cams seperate( pm for cam card)
2-24.5x8.5x15 m&h slicks lots of meat left work good 200 bux
2- 15"x7" rota sub zeros flat black look new 5x114.3 very light weels 200bux
5x114.3 bogarts slicks and skinnys plenty meat left sell all for $1000
full msd setup will sell cheap blaster2 coil 6al msd wires etc
fullrace_t3 t67ho turbo 82 back/70 front housing p trim wheel no probs at all make offer___
zex dry nitrous kit mint 250 bux
misc stock h22 stuff pm with needs_
''''' LOOKING FOR A ATV WITH PLOW WILL TRADE FOR PARTS OR BUY OUT RITE''''
__________________
Attached Images
__________________
silver pro comp 2 1/16 0-100 oil psi gauge 40 bux
aem wide band gauge with new sensor 175 bux
silver sport comp monster tach 10,000 with adjustable rpm setting and external shift light=175 bux
phantom 2 1/16 0-100 psi mechanical fuel gauge 30 bux
phantom 2 1/16 30psi boost gauge 40 bux
96-00 civic 2 gauge cluster bezel 30 bux
autometer low oil psi pencil warning light with 15 psi sensor=40 bux
2 gauge pillar mount for 2 1/16 gauges fits 96- civic/integra =25 bux
00 civic si cluster 175 bux
aem 30-1020 ems for obd2 already setup for coil on plug with a few h22 turbo programs in it $600
ferrea roller rocker setup for h22 with h22 all motor roller cams mint like new $1500 or just sell cams seperate( pm for cam card)
2-24.5x8.5x15 m&h slicks lots of meat left work good 200 bux
2- 15"x7" rota sub zeros flat black look new 5x114.3 very light weels 200bux
5x114.3 bogarts slicks and skinnys plenty meat left sell all for $1000
full msd setup will sell cheap blaster2 coil 6al msd wires etc
fullrace_t3 t67ho turbo 82 back/70 front housing p trim wheel no probs at all make offer___
zex dry nitrous kit mint 250 bux
misc stock h22 stuff pm with needs_
''''' LOOKING FOR A ATV WITH PLOW WILL TRADE FOR PARTS OR BUY OUT RITE''''
__________________
Attached Images
__________________