-March FS Thread-
#1
HELLO,GOOD MORNIN'
Thread Starter
Join Date: Sep 2002
Location: Savin lives
Posts: 8,909
Likes: 0
Received 0 Likes
on
0 Posts
-March FS Thread-
Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.
From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings
EVERYTHING HAS TO HAVE PICS NO exceptions
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.
From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings
EVERYTHING HAS TO HAVE PICS NO exceptions
Last edited by crazes; 03-07-2012 at 09:08 AM.
#3
Honda-Tech Member
Join Date: Nov 2007
Location: bronx, ny, usa
Posts: 1,464
Likes: 0
Received 0 Likes
on
0 Posts
Re: -March FS Thread-
dart block built by nrg tech to 1000whp specs......plus extras.........5500
nrgtech billet bellhousing....................................... ...................1550 shipped
toda camgears new in box............................................... .........280shipped
4inch aluminum exhaust.......with burnstainless ............................700
aebs intake manifold...b16 head.............................................. ...120shipped
nrgtech billet bellhousing....................................... ...................1550 shipped
toda camgears new in box............................................... .........280shipped
4inch aluminum exhaust.......with burnstainless ............................700
aebs intake manifold...b16 head.............................................. ...120shipped
#4
Honda-Tech Member
Join Date: Oct 2006
Location: miami, fl, us
Posts: 1,832
Likes: 0
Received 0 Likes
on
0 Posts
Re: -March FS Thread-
H22 head FRESH from the machine shop with BNIB Ferrea flat faced valves. 500 OBO
B series Supertech block guard BNIB 90 OBO
AFI B Series Ram Horn Manifolds T3 44mm wastegate BNIB 799 OBO
K24 OEM Crank 175 OBO
Competition Clutch K series twin disc BNIB 1000 OBO
B series Supertech block guard BNIB 90 OBO
AFI B Series Ram Horn Manifolds T3 44mm wastegate BNIB 799 OBO
K24 OEM Crank 175 OBO
Competition Clutch K series twin disc BNIB 1000 OBO
Last edited by TDautowerkes; 03-26-2012 at 11:59 AM.
#7
Honda-Tech Member
iTrader: (3)
Join Date: Aug 2010
Location: South Florida
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
Re: -March FS Thread-
Mase Engineering Turbo Kit S2000
Mase Turbo Manifold T3 w/ down pipe, 2 dump tubes and heat shield $1550 shipped
Tial Q BOV w/ new Flange $215 shipped
Tial MVS 38mm wastegate $215 Shipped
Precision Intercooler $350 shipped
Mase Turbo Manifold T3 w/ down pipe, 2 dump tubes and heat shield $1550 shipped
Tial Q BOV w/ new Flange $215 shipped
Tial MVS 38mm wastegate $215 Shipped
Precision Intercooler $350 shipped
Last edited by Joyero III; 03-30-2012 at 08:08 AM.
Trending Topics
#9
Honda-Tech Member
Join Date: Oct 2002
Location: bridgewater, nj, usa
Posts: 3,088
Likes: 0
Received 0 Likes
on
0 Posts
Re: -March FS Thread-
Full race top mount turbo kit. $1600*. t4 non twin scroll
Tial BOV, Precision wastgate and Intercooler
********Only missing turbo!*******
14x8 bogarts with 26x8.5x14 M&h tires with tubes. *$550
Brand new Blackworks coil overs shop display never mounted.
•SPRING RATES:
•Front 10KG (560lbs)
•Rear 6KG (336lbs)
$550
Control panel / msd with two step and two rpm avtivated switches auometer cluster. * ***** make offers on what you want****
MB one piece front end with hardware. $500
Side mount bracket bolts to door hinge location
Front mount bolts to factory bumper support location
Total 20 lugs. *
Never used opened slightly to see if blue matched my project. *Too far off so $65 firm picked up
albums/r313/monEmakindave/forsale/th_78c42536.png[/IMG][/URL]
Sparco pista seat with sparco drivers side rail for civic/integra
Lil bit fading left side. Don't mind wrinkle it ll come out had another seat laying on it
Sparco speed with sparco rail and slider for passenger side civic/integra
Lil fading on right side
Both seats with rails. *$500
Tial BOV, Precision wastgate and Intercooler
********Only missing turbo!*******
14x8 bogarts with 26x8.5x14 M&h tires with tubes. *$550
Brand new Blackworks coil overs shop display never mounted.
•SPRING RATES:
•Front 10KG (560lbs)
•Rear 6KG (336lbs)
$550
Control panel / msd with two step and two rpm avtivated switches auometer cluster. * ***** make offers on what you want****
MB one piece front end with hardware. $500
Side mount bracket bolts to door hinge location
Front mount bolts to factory bumper support location
Total 20 lugs. *
Never used opened slightly to see if blue matched my project. *Too far off so $65 firm picked up
albums/r313/monEmakindave/forsale/th_78c42536.png[/IMG][/URL]
Sparco pista seat with sparco drivers side rail for civic/integra
Lil bit fading left side. Don't mind wrinkle it ll come out had another seat laying on it
Sparco speed with sparco rail and slider for passenger side civic/integra
Lil fading on right side
Both seats with rails. *$500
#10
Re: -March FS Thread-
Brian Crower Stage 3 NA Cams (B -Series) 350 Shipped
Have about 40, 1/4 Mile passes on them. In mint shape.
Full Race 3inch V-band Down pipe 250 Shipped
One scrap on bottom doesn't leak at all. No dents
Is wrapped but is coming off alittle.
3 Inch SS Exhaust with Magnaflow muffler for Ek Hatch 250 Pick up.
FJO Wideband with NTK Sensor 200 Shipped
Includes Controller, 4ft sensor wire, and NTK sensor. All perfect working shape
Have about 40, 1/4 Mile passes on them. In mint shape.
Full Race 3inch V-band Down pipe 250 Shipped
One scrap on bottom doesn't leak at all. No dents
Is wrapped but is coming off alittle.
3 Inch SS Exhaust with Magnaflow muffler for Ek Hatch 250 Pick up.
FJO Wideband with NTK Sensor 200 Shipped
Includes Controller, 4ft sensor wire, and NTK sensor. All perfect working shape
#11
Honda-Tech Member
Join Date: Oct 2011
Location: Denison, TX
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Re: -March FS Thread-
Slightly used PT6768 CEA, dual ball bearing, a few dyno runs, 0 street/track miles. $1500 shipped and paypal.
T4 Front Mount Manifold, 44mm wg flange. $700obo shipped and paypal.
9.2:1 JE 84mm LS/Vtec Pistons, BNIB, $490 shipped.
BC Stage 2 turbo cams, BNIB, $425 shipped.
Email me at dustinmonroe.ng@gmail.com
T4 Front Mount Manifold, 44mm wg flange. $700obo shipped and paypal.
9.2:1 JE 84mm LS/Vtec Pistons, BNIB, $490 shipped.
BC Stage 2 turbo cams, BNIB, $425 shipped.
Email me at dustinmonroe.ng@gmail.com
#12
Re: -March FS Thread-
IF INTERESTED CALL 973)390-2982
B-series shift linkage with a B16 shifter*
4" aluminum exhaust $650
custom catch can sits next to the battery $275
the bracket is welded onto the battery tray*
comes with
battery tray w/ bracket welded to it
all 4 lines and fittings minus the 2 fittins on the actual block
wrinkle blue valve cover $100
B-series shift linkage with a B16 shifter*
4" aluminum exhaust $650
custom catch can sits next to the battery $275
the bracket is welded onto the battery tray*
comes with
battery tray w/ bracket welded to it
all 4 lines and fittings minus the 2 fittins on the actual block
wrinkle blue valve cover $100
#13
Honda-Tech Member
Re: -March FS Thread-
60mm Tial Full-Race wastegate $350 Clamps no flanges.
BBK 70mm throttle body $200
JG 8 injector GSR intake comes with bottom rail and hardware $275
Full Race single scroll for 60mm wastegate T-4 turbo manifold. NO WASTGATE SOLD
Apexi tach, Blitz carbon fiber water temp and oil gauges in a EG dash pod. make offer
BBK 70mm throttle body $200
JG 8 injector GSR intake comes with bottom rail and hardware $275
Full Race single scroll for 60mm wastegate T-4 turbo manifold. NO WASTGATE SOLD
Apexi tach, Blitz carbon fiber water temp and oil gauges in a EG dash pod. make offer
Last edited by nonvtecallmotor; 03-13-2012 at 09:28 PM.
#15
Honda-Tech Member
Re: -March FS Thread-
Set of 3 used eagle rods - 5.430" length for B18C1 GSR Crank. $125
3.5" vanjen coupler setup
Clamp is slightly used
Flanges are brand new
80$ out the door !!
706-346-6024
matt.stover@comcast.net
3.5" vanjen coupler setup
Clamp is slightly used
Flanges are brand new
80$ out the door !!
706-346-6024
matt.stover@comcast.net
#17
Honda-Tech Member
iTrader: (11)
Re: -March FS Thread-
i have a top mount manifold made by the brothers racing for sale
also come with 3' vband downpipe wrap with heat wrap. 600 plus shipping & pp fees
also a back door intercooler with a tial bov flange on the side 3" in&out
core size is 20x11x3 garret core! 600hp $450
pm for any info. than you
also come with 3' vband downpipe wrap with heat wrap. 600 plus shipping & pp fees
also a back door intercooler with a tial bov flange on the side 3" in&out
core size is 20x11x3 garret core! 600hp $450
pm for any info. than you
#18
Re: -March FS Thread-
LS Crankshaft $185.00
Completely stock B16 Cylinder Head $505.00
Innovate LC-1 $125.00
Aluminum Radiator $150.00
Clutchmaster FX400 Clutch and Exedy Chromoly Flywheel $505.00
5 Bar MAP Sensor $150.00
B-Series Aluminum Intake Manifold $135.00
B-Series ProFlo EFI Fuel Rail $165.00
Prices are negotiable. PM for details. Thank you
Completely stock B16 Cylinder Head $505.00
Innovate LC-1 $125.00
Aluminum Radiator $150.00
Clutchmaster FX400 Clutch and Exedy Chromoly Flywheel $505.00
5 Bar MAP Sensor $150.00
B-Series Aluminum Intake Manifold $135.00
B-Series ProFlo EFI Fuel Rail $165.00
Prices are negotiable. PM for details. Thank you
Last edited by sonicteg; 03-25-2012 at 12:04 PM.
#19
Honda-Tech Member
iTrader: (1)
Re: -March FS Thread-
Full Race T3 Top Mount w/ 44mm WG Flange & 4" Down Pipe (dented on bottom) - $600
Spec Twin Disc Clutch (Zero Track miles, street driven 250-300 miles) - $850
ACT B-Series Extreme Duty 4-puck Clutch/PP Kit with OEM GsR Flywheel....$225
Innovate Wideband with Gauge, Sensor and control Module - $120 obo
Spec Twin Disc Clutch (Zero Track miles, street driven 250-300 miles) - $850
ACT B-Series Extreme Duty 4-puck Clutch/PP Kit with OEM GsR Flywheel....$225
Innovate Wideband with Gauge, Sensor and control Module - $120 obo
Last edited by EF'n Sedan; 03-22-2012 at 06:23 PM.
#20
Honda-Tech Member
Join Date: Jan 2003
Location: Va Beach, VA, us
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Re: -March FS Thread-
1997 Acura Integra
Title in hand
$10,500
Contact - 757-619-0690 or pm
Car has current inspection, tags and insurance.
I bought this car with the intentions to race again but thats not gonna happen so up for sale she goes.
Engine/Drivetrain:
K20A Engine
Eagle Rods
Wisco Pistons
ACL Race Bearings
ARP Head Studs
Ferrea valves, valve springs & retainers
Edelbrock 75mm TB
Edelbrock FPR
1600cc injectors
Full-Race Exhaust Manifold
Precision Intercooler
Garrett 4088R Turbo
(2) Tial 44mm WG
4" to 3" Down Pipe
3" Thermal Exhaust w/ Vibrant Muffler
Type S 6-speed trans. w/ Quaife LSD
DSS Stage 3 axles
Carbonetics Twin Disc clutch - carbon/carbon
Scattershield
Koyo RSX Alum. Radiator
Suspension:
KYB Adjustable shocks
Skunk 2 drag race springs
Full-Race traction bar
Energy suspension bushings
Interior:
Apex Guages - oil, boost, water temp
Del Sol seats
Momo wheel
RCI belts
AEM engine mangt.
AEM wide band
10pt cage (expired) NHRA cert
Turbo smart boost controller
Exterior:
CARBON FIBER - Hood, Side Skirts, Trunk and Front Lip
JDM 1 piece headlights, sidemarkers
Painted s2000 Silverstone metallic
Wheels:
15X7 Rays Gram Lights
Cross drilled rotors
(2) new front tires
I'm sure im forgetting some stuff but any questions give me a call.
Attached Images
Title in hand
$10,500
Contact - 757-619-0690 or pm
Car has current inspection, tags and insurance.
I bought this car with the intentions to race again but thats not gonna happen so up for sale she goes.
Engine/Drivetrain:
K20A Engine
Eagle Rods
Wisco Pistons
ACL Race Bearings
ARP Head Studs
Ferrea valves, valve springs & retainers
Edelbrock 75mm TB
Edelbrock FPR
1600cc injectors
Full-Race Exhaust Manifold
Precision Intercooler
Garrett 4088R Turbo
(2) Tial 44mm WG
4" to 3" Down Pipe
3" Thermal Exhaust w/ Vibrant Muffler
Type S 6-speed trans. w/ Quaife LSD
DSS Stage 3 axles
Carbonetics Twin Disc clutch - carbon/carbon
Scattershield
Koyo RSX Alum. Radiator
Suspension:
KYB Adjustable shocks
Skunk 2 drag race springs
Full-Race traction bar
Energy suspension bushings
Interior:
Apex Guages - oil, boost, water temp
Del Sol seats
Momo wheel
RCI belts
AEM engine mangt.
AEM wide band
10pt cage (expired) NHRA cert
Turbo smart boost controller
Exterior:
CARBON FIBER - Hood, Side Skirts, Trunk and Front Lip
JDM 1 piece headlights, sidemarkers
Painted s2000 Silverstone metallic
Wheels:
15X7 Rays Gram Lights
Cross drilled rotors
(2) new front tires
I'm sure im forgetting some stuff but any questions give me a call.
Attached Images
Last edited by clarkBAR; 03-24-2012 at 08:01 AM.
#21
Honda-Tech Member
iTrader: (1)
Join Date: May 2005
Location: Northern UT
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
Re: -March FS Thread-
B16 Victor X intake mani $225
Bosch 1600cc injectors $400
STR 68mm TB $175
3 piece front $650 + shipping
Tial 50mm BOV $175.
BN Blue Print Racing LS-v/Gsr head studs SOLD.
I Also have a used set, TQ once GE head studs $65 +shipping
[IMG]http://i458.photobucket.com/albums/qq303/spockeg/2012]
Bosch 1600cc injectors $400
STR 68mm TB $175
3 piece front $650 + shipping
Tial 50mm BOV $175.
BN Blue Print Racing LS-v/Gsr head studs SOLD.
I Also have a used set, TQ once GE head studs $65 +shipping
[IMG]http://i458.photobucket.com/albums/qq303/spockeg/2012]
#22
Re: -March FS Thread-
Kens Kustom wheelie/traction bars unused
3pc exospeed **CLOSED FRONT** -850 firm
cms racing spindle mount 15x4 make offer
franks fiberglass hot rod style 1pc front end-- make offer
P29 pistons and rings 100
**items for sale do not include shipping or pay pal fees**
#23
Honda-Tech Member
Re: -March FS Thread-
Full-Race intake manifold for GSR Head. With Accufab 75mm Throttle body.
Bought this from JAson Hunt a while ago now, never ran it on my car. Didnt realize until I had it that It was for a GSR, I need a b16.
Looking to get what I payed for them, 650$
Buyer covers shipping.
Will accept trades on a B16 Manifold. Full-Race/Golden Eagle/BMC
Bought this from JAson Hunt a while ago now, never ran it on my car. Didnt realize until I had it that It was for a GSR, I need a b16.
Looking to get what I payed for them, 650$
Buyer covers shipping.
Will accept trades on a B16 Manifold. Full-Race/Golden Eagle/BMC
#25
Honda-Tech Member
Join Date: Jul 2002
Location: Los Angeles, CA, USA
Posts: 824
Likes: 0
Received 0 Likes
on
0 Posts
Re: -March FS Thread-
H22 Turbo Manifold - $700
Built by Innovative Turbo Sysytems back in 2003. Was fully polished, bead blasted now. T4 single scroll and two bolt 38mm wg flange. Thick wall stainless steel TIG welded construction. Very durable, been used on a street car for years. I'll include an adapter to run a 44mm v-band wg. Including downpipe too.
Precision Turbo 1000cc Injectors - $200
Used, but in excellent condition.
99-00 Carbon Fiber Hood with Custom Scoop for Full Race K24 manifold - $200
Tilton H22 Cerametallic Twin Disk Clutch - $1000
Less than 10 passes. Excellent condition. Had my machinist clean up the flywheel bolt mounting surface, it got a bit worn.
H22 CNC Ported Cylinder Head. Ported by R&D Dyno Service. - $600
Includes cam caps, rocker assemblies, shafts, LMAs, dual springs and Ti retainers. Intake #3 has full valve guides, all other ports are cut back to the port wall. I'd recommend getting new springs and retainers.
Sparco Steering Wheel with EK hub - $75
About six years old, leather pulling back a bit. Includes horn button.
Aeromotive ELIMINATOR 11104 Fuel Pumps (2 Avail) - $250 each
One has a slightly bent mounting ear. Will include fittings with that one. Other one is freshly rebuilt from Aeromotive.
Built by Innovative Turbo Sysytems back in 2003. Was fully polished, bead blasted now. T4 single scroll and two bolt 38mm wg flange. Thick wall stainless steel TIG welded construction. Very durable, been used on a street car for years. I'll include an adapter to run a 44mm v-band wg. Including downpipe too.
Precision Turbo 1000cc Injectors - $200
Used, but in excellent condition.
99-00 Carbon Fiber Hood with Custom Scoop for Full Race K24 manifold - $200
Tilton H22 Cerametallic Twin Disk Clutch - $1000
Less than 10 passes. Excellent condition. Had my machinist clean up the flywheel bolt mounting surface, it got a bit worn.
H22 CNC Ported Cylinder Head. Ported by R&D Dyno Service. - $600
Includes cam caps, rocker assemblies, shafts, LMAs, dual springs and Ti retainers. Intake #3 has full valve guides, all other ports are cut back to the port wall. I'd recommend getting new springs and retainers.
Sparco Steering Wheel with EK hub - $75
About six years old, leather pulling back a bit. Includes horn button.
Aeromotive ELIMINATOR 11104 Fuel Pumps (2 Avail) - $250 each
One has a slightly bent mounting ear. Will include fittings with that one. Other one is freshly rebuilt from Aeromotive.