March FS Sticky
#101
Honda-Tech Member
Join Date: Nov 2002
Location: "It's Miley" Pittsburgh, PA
Posts: 2,303
Likes: 0
Received 0 Likes
on
0 Posts
Re: March FS Sticky
Garrett 4088R DBB T4 .92AR(i think somewhere around there can find out if interested.
A few dyno runs on it its brand new blades are pefect and will spin for 5 min after you shut the car down.
$900 shipped anywhere in the 48
A few dyno runs on it its brand new blades are pefect and will spin for 5 min after you shut the car down.
$900 shipped anywhere in the 48
#102
Honda-Tech Member
iTrader: (1)
Re: March FS Sticky
h22 pro 3 cams new ever used(new from tony @skunk)
pm me for pics 600.00 shipped
Full omni drag coil overs....
18k rear 12k front and all so have 12k rear spring that will go with the set
600.00+shipping frim......they have 10 passes on them like new
pm me for pics 600.00 shipped
Full omni drag coil overs....
18k rear 12k front and all so have 12k rear spring that will go with the set
600.00+shipping frim......they have 10 passes on them like new
Last edited by JDM JEFFREY; 03-29-2010 at 10:02 PM.
#103
Honda-Tech Member
Join Date: Sep 2002
Location: Miami, Florida Yo
Posts: 1,066
Likes: 0
Received 0 Likes
on
0 Posts
Re: March FS Sticky
Item: Built k24a4
Price: 1600 obo
Item Description: K24a4 block for sale. Je 13:1 comp pistons, Manley econo rods. includes side cover and oil pump/chain. Made 245whp with stock tsx head and cams. Burns oil but still made the power.
Photos:
Price: 1600 obo
Item Description: K24a4 block for sale. Je 13:1 comp pistons, Manley econo rods. includes side cover and oil pump/chain. Made 245whp with stock tsx head and cams. Burns oil but still made the power.
Photos:
#104
#105
Honda-Tech Member
Join Date: Feb 2008
Location: No Where Special
Posts: 647
Likes: 0
Received 0 Likes
on
0 Posts
Re: Shell For Sale
For Sale:94 Civic HB Sfwd/Street Comp/Outlaw/T4 Shell in So Cal
Comes with
Exterior:Exospeed Racing frontend,Exospeed Racing wheels,Diest chute,carbon fiber hood,battery shutoff
Interior:aftermarket seats,G-force windownet.Crow 5-point harness,Certified NHRA cage Recertified end last season,complete factory interior minus rear seats
Supension:Ommin Drag front/rear,traction bar,skunk 2 front adjustable control arms
fuel system:sumped factory fuel tank,A1000 fuel pump,-12/-10 fuel lines,No fuel regulator
$4000 with wheels $3500 without wheels PM if any questions
Comes with
Exterior:Exospeed Racing frontend,Exospeed Racing wheels,Diest chute,carbon fiber hood,battery shutoff
Interior:aftermarket seats,G-force windownet.Crow 5-point harness,Certified NHRA cage Recertified end last season,complete factory interior minus rear seats
Supension:Ommin Drag front/rear,traction bar,skunk 2 front adjustable control arms
fuel system:sumped factory fuel tank,A1000 fuel pump,-12/-10 fuel lines,No fuel regulator
$4000 with wheels $3500 without wheels PM if any questions
#106
Honda-Tech Member
Join Date: Sep 2007
Location: Olympia, wa, usa
Posts: 526
Likes: 0
Received 0 Likes
on
0 Posts
Re: March FS Sticky
Please do not delete this post. I know i dont have my little pnw badge but there is many people that will vouch for me being legit like s2000 junky - Thank you
Im selling all my drivetrain for my s2000
I have a built f20c short block
golden eagle sleves
pauter rods
cp pistons
9:1
90mm bore
acl bearing
polished crank
includes oil pan with -10 fitting welded on for turbo oil return
crankcase vent -12 bung welded to crankcase
all chains,guides,oilpump, timeing cover
just throw your head on and ready to go.
3000
i have a ap1 transmission i bought of honda-tech last year. put maybe 3000 miles on it. he said it sat for several years before he sold it to me. has roughly 55,000 miles on it.
700
both axels
300
complete turbo kit - custom kit that i built comes with everything exept injectors or ems
precision 6262 billet turbo
custom manifold
twin tial 38mm wastegates
dump tubes
3in downpipe
3in full exhaust
3in intercooler pipeing
intercooler
greddy type r bov
inlinepro oil filter kit
feed and return lines
4000 obo
http://viewmorepics.myspace.com/inde...ageID=67462428
http://viewmorepics.myspace.com/inde...085&i=59121928
http://viewmorepics.myspace.com/inde...ageID=64328550
http://viewmorepics.myspace.com/inde...ageID=65683615
Thanks
Zach
Im selling all my drivetrain for my s2000
I have a built f20c short block
golden eagle sleves
pauter rods
cp pistons
9:1
90mm bore
acl bearing
polished crank
includes oil pan with -10 fitting welded on for turbo oil return
crankcase vent -12 bung welded to crankcase
all chains,guides,oilpump, timeing cover
just throw your head on and ready to go.
3000
i have a ap1 transmission i bought of honda-tech last year. put maybe 3000 miles on it. he said it sat for several years before he sold it to me. has roughly 55,000 miles on it.
700
both axels
300
complete turbo kit - custom kit that i built comes with everything exept injectors or ems
precision 6262 billet turbo
custom manifold
twin tial 38mm wastegates
dump tubes
3in downpipe
3in full exhaust
3in intercooler pipeing
intercooler
greddy type r bov
inlinepro oil filter kit
feed and return lines
4000 obo
http://viewmorepics.myspace.com/inde...ageID=67462428
http://viewmorepics.myspace.com/inde...085&i=59121928
http://viewmorepics.myspace.com/inde...ageID=64328550
http://viewmorepics.myspace.com/inde...ageID=65683615
Thanks
Zach
#107
Honda-Tech Member
Join Date: Jan 2007
Location: Bay Area
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
Re: March FS Sticky
Autometer Pro-stock carbon tach #6836.
The tach is a 5 in, 0-11,000 rpm, Analog, Electrical, with Shift Light/Memory. Unlike many tachs this one has individual shift points, so you can setup a custom shift point for all 5 gears. Now the tach isn't new but its in very good condition, I traded some work with a friend and received this as payment. If you go online you will see this tach sells for $395-$500, Im asking $250 OBO It will come in the original box and comes with all the hardware even the stickers[]
(if you need more just PM me)
The tach is a 5 in, 0-11,000 rpm, Analog, Electrical, with Shift Light/Memory. Unlike many tachs this one has individual shift points, so you can setup a custom shift point for all 5 gears. Now the tach isn't new but its in very good condition, I traded some work with a friend and received this as payment. If you go online you will see this tach sells for $395-$500, Im asking $250 OBO It will come in the original box and comes with all the hardware even the stickers[]
(if you need more just PM me)
#108
Honda-Tech Member
Join Date: Feb 2004
Location: Glenn Dale, Maryland, USA
Posts: 283
Likes: 0
Received 0 Likes
on
0 Posts
Re: March FS Sticky
I have 3 brand new 5 gallon containers of World Wide Racing Fuels Racing Ethanol.
$40.00 each
Pick up in Maryland.
301-809-6345 or 240-508-1449
Thanks!!!
Luis
http://www.paradiseracing.com/Store/...0bdy%20001.jpg
$40.00 each
Pick up in Maryland.
301-809-6345 or 240-508-1449
Thanks!!!
Luis
http://www.paradiseracing.com/Store/...0bdy%20001.jpg
#109
Honda-Tech Member
Join Date: Jan 2006
Location: Shifting through socal with 3 toes
Posts: 2,221
Likes: 0
Received 0 Likes
on
0 Posts
Re: March FS Sticky
Well I decided to part out some of my build.
T1 Intercooler with 3" Hargett Clamps, Inlet is backdoor and outlet is normal. This is setup up for a EG. I will also include some Rivet nuts that allow the IC to be easily removed.
Paid 1400 Asking 1050 shipped
MoTeC M4 that has advanced tuning and logging. It also comes with a full mill-spec harness with 2 bulkhead connectors(1 for motec, 1 for M&W)
the system will also come with a M&W pro-12. The harness is setup for a T1 pick up and boost by ground speed.
Asking 3600 shipped for both M&W and motec, For 350 I will include A prologger that is already wired into the harness
you can reach me here or through phone.
323 947 9543
T1 Intercooler with 3" Hargett Clamps, Inlet is backdoor and outlet is normal. This is setup up for a EG. I will also include some Rivet nuts that allow the IC to be easily removed.
Paid 1400 Asking 1050 shipped
MoTeC M4 that has advanced tuning and logging. It also comes with a full mill-spec harness with 2 bulkhead connectors(1 for motec, 1 for M&W)
the system will also come with a M&W pro-12. The harness is setup for a T1 pick up and boost by ground speed.
Asking 3600 shipped for both M&W and motec, For 350 I will include A prologger that is already wired into the harness
you can reach me here or through phone.
323 947 9543
#111
Honda-Tech Member
Join Date: Sep 2002
Location: Miami, Florida Yo
Posts: 1,066
Likes: 0
Received 0 Likes
on
0 Posts
Re: March FS Sticky
15" rims with slicks
Price: $600.00 obo plus shipping
Location: Miami, Fl
Item Description: 15x6.5 4x100 Gold Konig light weight wheels
Fronts have M&H 24.5x8x15 slicks
Rears Have almost new Yokohama 185-65-15
Photos: 15x6.5 4x100 Gold Konig light weight wheels
Fronts have M&H 24.5x8x15 slicks
Rears Have almost new Yokohama 185-65-15
Price: $600.00 obo plus shipping
Location: Miami, Fl
Item Description: 15x6.5 4x100 Gold Konig light weight wheels
Fronts have M&H 24.5x8x15 slicks
Rears Have almost new Yokohama 185-65-15
Photos: 15x6.5 4x100 Gold Konig light weight wheels
Fronts have M&H 24.5x8x15 slicks
Rears Have almost new Yokohama 185-65-15
#112
Honda-Tech Member
Join Date: May 2003
Location: miami, fl, usa
Posts: 1,335
Likes: 0
Received 0 Likes
on
0 Posts
Re: March FS Sticky
selling a fabworx t3 sidewinder,uses to 44mm wastegates to control boost,no boost creep here!has less than 300 miles!!will include 3 inch 2 piece vband downpipe,and wastegate dump tubes all stainless steel( top dumptube is complete,just not in the pics shown $950 obo shipped save here!!
billet 6265 turbo t3 .82 backhousing,journal bearing less than 300miles on it!
$780 shipped
2 tial 44mm wastegates with 10psi springs
$250 each shipped
id1000cc injector,best 1000cc injector you can buy!less than 300 miles on them!
$380 obo shipped
xcessive intake manifold side feed,first version
$350 obo shipped
peakboost vertical flow intercooler with intercooler piping,good for 600hp+.flanged for tial bov behind the front bumper for a nice clean look.will include all couplers and clamps.will need slight modification for throttle body locations depending on what intake manifold you run.or you can buy the xcessive intake manifold to go with it and it will bolt right up!
$550 shipped
full blown motorsports dual walbro hanger with 2 walbro 255 and -8 feed steel braided and -6 return all included setup for a kswap $520 shipped less than 300 miles!!
$520 shipped
billet 6265 turbo t3 .82 backhousing,journal bearing less than 300miles on it!
$780 shipped
2 tial 44mm wastegates with 10psi springs
$250 each shipped
id1000cc injector,best 1000cc injector you can buy!less than 300 miles on them!
$380 obo shipped
xcessive intake manifold side feed,first version
$350 obo shipped
peakboost vertical flow intercooler with intercooler piping,good for 600hp+.flanged for tial bov behind the front bumper for a nice clean look.will include all couplers and clamps.will need slight modification for throttle body locations depending on what intake manifold you run.or you can buy the xcessive intake manifold to go with it and it will bolt right up!
$550 shipped
full blown motorsports dual walbro hanger with 2 walbro 255 and -8 feed steel braided and -6 return all included setup for a kswap $520 shipped less than 300 miles!!
$520 shipped
Thread
Thread Starter
Forum
Replies
Last Post