62mm turbo cars post up your times!
01-31-2013, 08:58 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2011
Location: wisconsin
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
62mm turbo cars post up your times!
I have seen a few questions recently about 62mm cars and what there running for times. Curious myselfand thought why not have a thread for those running the 62's and see how everyone is doing with them.
01-31-2013, 09:31 PM
#2
Honda-Tech Member
Join Date: May 2006
Location: Venice, Florida, US of A
Posts: 2,148
Likes: 0
Received 0 Likes
on
0 Posts
Re: 62mm turbo cars post up your times!
Full weight, full interior, Integra GSR:
84mm CP 9.0:1, Eagle rods B18C1, Dartons sleevs, stock head and GSR cams, Supertech valve train with Ferrea stock sized Valves
Precision 6266 t3 housing, Forward facing setup. On C16 and 30psi it made 598whp and 424ft lbs, tuned by John vega at Phearable.net on Hondata.
Personal Best ET 10.497 @ 143mph with a 1.7 60' (MT 24.5x9x13 slicks)
Personal Best trap speed is 144.60mph.
84mm CP 9.0:1, Eagle rods B18C1, Dartons sleevs, stock head and GSR cams, Supertech valve train with Ferrea stock sized Valves
Precision 6266 t3 housing, Forward facing setup. On C16 and 30psi it made 598whp and 424ft lbs, tuned by John vega at Phearable.net on Hondata.
Personal Best ET 10.497 @ 143mph with a 1.7 60' (MT 24.5x9x13 slicks)
Personal Best trap speed is 144.60mph.
02-01-2013, 06:35 AM
#7
Honda-Tech Member
Join Date: Dec 2005
Location: Ohio
Posts: 3,360
Likes: 0
Received 0 Likes
on
0 Posts
Re: 62mm turbo cars post up your times!
My old setup:
Full weight 4dr Integra with 10pt cage and 300lb driver (guessing its over 3000lbs with me in it)
84mm GSR
9:1 CP's
6262 JB
Go-Autoworks Top Mount
24.5 MT's
11.2@129.4mph
517whp/340tq on 17psi and pump gas
Breakdown of that run
1.818
4.959
7.411
101.86
9.511
11.285
129.4
Full weight 4dr Integra with 10pt cage and 300lb driver (guessing its over 3000lbs with me in it)
84mm GSR
9:1 CP's
6262 JB
Go-Autoworks Top Mount
24.5 MT's
11.2@129.4mph
517whp/340tq on 17psi and pump gas
Breakdown of that run
1.818
4.959
7.411
101.86
9.511
11.285
129.4
Trending Topics
02-01-2013, 09:34 AM
#8
Honda-Tech Member
Re: 62mm turbo cars post up your times!
ls vtec 83mm
Stock head
gsr cams
ramhorn t3 6262
stock fuel lines walbro/044 pte1600s
made 707@34psi MKC tuned on c16
Went 10.0 at 153
Stock head
gsr cams
ramhorn t3 6262
stock fuel lines walbro/044 pte1600s
made 707@34psi MKC tuned on c16
Went 10.0 at 153
02-01-2013, 12:32 PM
#9
Honda-Tech Member
Re: 62mm turbo cars post up your times!
1994 GSR
2500lbs with driver and interior.
Sleeved 84mm GSR
10.5:1 JE pistons
Eagle rods
Supertech Valve springs/Retainers
Ferrea 6000 IN/EX valves
Ferrea Keepers
B16 head
GSC Power-Division Turbo Cams
Victor X intake mani
Stock TB
FIC 2150's
Stock sumped fuel tank
Twin 255's inline
ETS Forward Facing Turbo manifold
ETS 4x12x24" intercooler
Precision 6262, T3 .82A/R
The car made 690whp on E98... Now it makes 710whp@30psi on E98.
60ft: 1.653
330ft: 4.574
1/8th: 6.789@112.83
1000ft: 8.627
1/4 mile: 10.128@151
Turned the boost up the next pass in 2/3/4
60ft: 1.652
330ft: 4.567
1/8th: 6.911@110.94
1000ft: 8.627
1/4 mile: 10.29@151
Missed 3rd gear lol. But still went 151, so expecting it to go a little faster this year with some new mods
.
2500lbs with driver and interior.
Sleeved 84mm GSR
10.5:1 JE pistons
Eagle rods
Supertech Valve springs/Retainers
Ferrea 6000 IN/EX valves
Ferrea Keepers
B16 head
GSC Power-Division Turbo Cams
Victor X intake mani
Stock TB
FIC 2150's
Stock sumped fuel tank
Twin 255's inline
ETS Forward Facing Turbo manifold
ETS 4x12x24" intercooler
Precision 6262, T3 .82A/R
The car made 690whp on E98... Now it makes 710whp@30psi on E98.
60ft: 1.653
330ft: 4.574
1/8th: 6.789@112.83
1000ft: 8.627
1/4 mile: 10.128@151
Turned the boost up the next pass in 2/3/4
60ft: 1.652
330ft: 4.567
1/8th: 6.911@110.94
1000ft: 8.627
1/4 mile: 10.29@151
Missed 3rd gear lol. But still went 151, so expecting it to go a little faster this year with some new mods
.
02-01-2013, 04:06 PM
#10
Honda-Tech Member
Join Date: Oct 2009
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Re: 62mm turbo cars post up your times!
EK coupe
2491 lbs with driver
GSR Stock sleeves 81mm
CP piston, Eagle rods
Stock Cams, Supertech springs & retainers
Stock tranny
1600cc injectors
Precision 6262 turbo
Hondata S300
Q16
2491 lbs with driver
GSR Stock sleeves 81mm
CP piston, Eagle rods
Stock Cams, Supertech springs & retainers
Stock tranny
1600cc injectors
Precision 6262 turbo
Hondata S300
Q16
02-02-2013, 05:10 AM
#17
Honda-Tech Member
Re: 62mm turbo cars post up your times!
10.20@150mph
KMOD Performance Street RSX (Full Interior Street Car) 2885lbs
KMOD stg.3 K24 Engine
KMOD stg.5 Turbo Kit (PTE 6266) 800+whp
M&H 24.5 x 15 Slicks
Video#1-
Video#2-
60ft= 1.74
1/8th= 6.779
Qtr= 10.20@150mph
Timeslip-
Car on the scales-
-Marquis
-www.KMODperformance.com
P.S We ran 10.20@150 w/ only 726whp, we are now over 800whp & shooting for 9s in a full weight street car.
KMOD Performance Street RSX (Full Interior Street Car) 2885lbs
KMOD stg.3 K24 Engine
KMOD stg.5 Turbo Kit (PTE 6266) 800+whp
M&H 24.5 x 15 Slicks
Video#1-
Video#2-
60ft= 1.74
1/8th= 6.779
Qtr= 10.20@150mph
Timeslip-
Car on the scales-
-Marquis
-www.KMODperformance.com
P.S We ran 10.20@150 w/ only 726whp, we are now over 800whp & shooting for 9s in a full weight street car.
02-02-2013, 01:22 PM
#19
Honda-Tech Member
Join Date: May 2010
Posts: 1,010
Likes: 0
Received 0 Likes
on
0 Posts
Re: 62mm turbo cars post up your times!
T4 6265 1.15 AR in a full weight Integra gsr with a 10 point roll cage. 10.82@134mph with a best trap that day of 136 at 26psi and no full throttle.
Car made 709whp and 500tq at 33psi on c16. Full throttle shifting next year!
Car made 709whp and 500tq at 33psi on c16. Full throttle shifting next year!
02-02-2013, 09:49 PM
#20
Honda-Tech Member
Re: 62mm turbo cars post up your times!
9.7@154 and 9.7@150 back to back on the second and third pass ever on the track. doing a few things over winter hoping to go faster.
02-04-2013, 04:37 AM
#22
Honda-Tech Member
Join Date: May 2008
Location: Culpeper, va, US
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Re: 62mm turbo cars post up your times!
9.68@149 6265 journal bearing 84mm gsr 9:1 cp and manleys made 620whp stock trans and diff inline pro t4 kit on q16 2 years ago.
02-04-2013, 09:12 AM
#23
Honda-Tech Member
Join Date: Feb 2007
Location: plantation, fl, usa
Posts: 3,118
Likes: 0
Received 0 Likes
on
0 Posts
Re: 62mm turbo cars post up your times!
b series.. 6265bb.. 825hp... q16..s300..stock trans... True Street trim 9.60@160 in 2009
two customers just went pretty quick too.
82mm bore stock sleeve b series with cncwerx block gaurd
6262jb
stock trans
s300
c16
9.75@149
84mm b series
6262jb
stock trans
s300
e85
9.80@154
both in True Street trim. The second car is going 67mm this year and getting a trans
two customers just went pretty quick too.
82mm bore stock sleeve b series with cncwerx block gaurd
6262jb
stock trans
s300
c16
9.75@149
84mm b series
6262jb
stock trans
s300
e85
9.80@154
both in True Street trim. The second car is going 67mm this year and getting a trans
02-05-2013, 04:58 AM
#25
Honda-Tech Member
Re: 62mm turbo cars post up your times!
82mm LSVTEC, Stock Sleeve
10:1 CPs, Manely H Beams
95 Coupe 2450 with Driver
C16, 575hp
10.37 @147mph, 1.60 60ft
10:1 CPs, Manely H Beams
95 Coupe 2450 with Driver
C16, 575hp
10.37 @147mph, 1.60 60ft