|
62mm turbo cars post up your times!
I have seen a few questions recently about 62mm cars and what there running for times. Curious myselfand thought why not have a thread for those running the 62's and see how everyone is doing with them.
|
Re: 62mm turbo cars post up your times!
Full weight, full interior, Integra GSR:
84mm CP 9.0:1, Eagle rods B18C1, Dartons sleevs, stock head and GSR cams, Supertech valve train with Ferrea stock sized Valves Precision 6266 t3 housing, Forward facing setup. On C16 and 30psi it made 598whp and 424ft lbs, tuned by John vega at Phearable.net on Hondata. Personal Best ET 10.497 @ 143mph with a 1.7 60' (MT 24.5x9x13 slicks) Personal Best trap speed is 144.60mph. |
Re: 62mm turbo cars post up your times!
1 Attachment(s)
Full weight, Full Interior, Integra LS
2 liter b series 6262 10.8 @ 140mph Heres some slips from my last test and tune about a month ago, Attachment 533500 |
Re: 62mm turbo cars post up your times!
92 eg hb
6266 d16z6 19 psi 10.967 @ 129.57 24.5x8x13 mt |
Re: 62mm turbo cars post up your times!
Not bad numbers, keep em coming.
|
Re: 62mm turbo cars post up your times!
d16 vitara motor
6262 23in worn out slicks 11.01@129mph |
Re: 62mm turbo cars post up your times!
My old setup:
Full weight 4dr Integra with 10pt cage and 300lb driver (guessing its over 3000lbs with me in it) 84mm GSR 9:1 CP's 6262 JB Go-Autoworks Top Mount 24.5 MT's 11.2@129.4mph 517whp/340tq on 17psi and pump gas Breakdown of that run 1.818 4.959 7.411 101.86 9.511 11.285 129.4 |
Re: 62mm turbo cars post up your times!
ls vtec 83mm
Stock head gsr cams ramhorn t3 6262 stock fuel lines walbro/044 pte1600s made 707@34psi MKC tuned on c16 Went 10.0 at 153 |
Re: 62mm turbo cars post up your times!
1994 GSR
2500lbs with driver and interior. Sleeved 84mm GSR 10.5:1 JE pistons Eagle rods Supertech Valve springs/Retainers Ferrea 6000 IN/EX valves Ferrea Keepers B16 head GSC Power-Division Turbo Cams Victor X intake mani Stock TB FIC 2150's Stock sumped fuel tank Twin 255's inline ETS Forward Facing Turbo manifold ETS 4x12x24" intercooler Precision 6262, T3 .82A/R The car made 690whp on E98... Now it makes 710whp@30psi on E98. 60ft: 1.653 330ft: 4.574 1/8th: 6.789@112.83 1000ft: 8.627 1/4 mile: 10.128@151 Turned the boost up the next pass in 2/3/4 60ft: 1.652 330ft: 4.567 1/8th: 6.911@110.94 1000ft: 8.627 1/4 mile: 10.29@151 Missed 3rd gear lol. But still went 151, so expecting it to go a little faster this year with some new mods :). |
Re: 62mm turbo cars post up your times!
EK coupe
2491 lbs with driver GSR Stock sleeves 81mm CP piston, Eagle rods Stock Cams, Supertech springs & retainers Stock tranny 1600cc injectors Precision 6262 turbo Hondata S300 Q16 http://i46.tinypic.com/117chti.jpg |
Re: 62mm turbo cars post up your times!
D16z6.
Pte6262. 2400lbs. 10.68@137 |
Re: 62mm turbo cars post up your times!
9.89@149. Keepin it stupid simple setup.
|
Re: 62mm turbo cars post up your times!
b18c1
MasterPower 62mm oem gsr trans/open diff 10.85@131 1.59 60' ek hatch, 2400# with driver 24.5x8 MH |
Re: 62mm turbo cars post up your times!
Eg 2400lbs with driver
24.5/9/13 M/T B20-Vtec 85mm 6262 20psi GSR tranny http://i277.photobucket.com/albums/k...340B8C3BD4.jpg |
Re: 62mm turbo cars post up your times!
Originally Posted by portenio78
(Post 48410804)
9.89@149. Keepin it stupid simple setup.
|
Re: 62mm turbo cars post up your times!
60ft- 1.75
1/8th 7.0 at 100 1/4 10.85 at 130 440whp 2700lbs |
Re: 62mm turbo cars post up your times!
10.20@150mph
KMOD Performance Street RSX (Full Interior Street Car) 2885lbs KMOD stg.3 K24 Engine KMOD stg.5 Turbo Kit (PTE 6266) 800+whp M&H 24.5 x 15 Slicks Video#1- Video#2- 60ft= 1.74 1/8th= 6.779 Qtr= 10.20@150mph Timeslip- http://farm9.staticflickr.com/8151/7...f318bd9b_c.jpg Car on the scales- http://farm9.staticflickr.com/8378/8...c4972060_c.jpg -Marquis -www.KMODperformance.com P.S We ran 10.20@150 w/ only 726whp, we are now over 800whp & shooting for 9s in a full weight street car. |
Re: 62mm turbo cars post up your times!
Stock k20 plus 35r peakboost kit on 18lbs. 10.49@133 shifting to 5th at the end |
Re: 62mm turbo cars post up your times!
T4 6265 1.15 AR in a full weight Integra gsr with a 10 point roll cage. 10.82@134mph with a best trap that day of 136 at 26psi and no full throttle.
Car made 709whp and 500tq at 33psi on c16. Full throttle shifting next year! |
Re: 62mm turbo cars post up your times!
9.7@154 and 9.7@150 back to back on the second and third pass ever on the track. doing a few things over winter hoping to go faster.
|
Re: 62mm turbo cars post up your times!
Originally Posted by neonkid
(Post 48411583)
care to elaborate on your setup?
Stock sleeves Portflow head with CTR cams Stock trans w/MFactory diff S300 Stock throttle body and Skunk2 intake. |
Re: 62mm turbo cars post up your times!
9.68@149 6265 journal bearing 84mm gsr 9:1 cp and manleys made 620whp stock trans and diff inline pro t4 kit on q16 2 years ago.
|
Re: 62mm turbo cars post up your times!
b series.. 6265bb.. 825hp... q16..s300..stock trans... True Street trim 9.60@160 in 2009
two customers just went pretty quick too. 82mm bore stock sleeve b series with cncwerx block gaurd 6262jb stock trans s300 c16 9.75@149 84mm b series 6262jb stock trans s300 e85 9.80@154 both in True Street trim. The second car is going 67mm this year and getting a trans |
Re: 62mm turbo cars post up your times!
84.5
b16 aem-ems id2k 6265 757/498@35psi e85 10.7@148/ 1.71 60/7.0 eight granny shifting |
Re: 62mm turbo cars post up your times!
82mm LSVTEC, Stock Sleeve
10:1 CPs, Manely H Beams 95 Coupe 2450 with Driver C16, 575hp 10.37 @147mph, 1.60 60ft |
| All times are GMT -8. The time now is 04:07 PM. |
© 2024 MH Sub I, LLC dba Internet Brands