FS: Fuel System, Sleeved Built GSR Block, GSR Head, S372r Turbo and More !!!
#1
Thread Starter
iTrader: (3)
FS: Fuel System, Sleeved Built GSR Block, GSR Head, S372r Turbo and More !!!
looking to liquidate these parts -- pictures available upon request
Email -- James@IPGParts.com
Phone -- 407-324-4684
or PM
-- AIR Carbon B16/B18 Intake Manifold -- Set up for 8 Injectors -- includes the lower fuel rail as pictured, manifold flange is drilled for both the B16 and GSR Head Pattern -- Great intake manifold -- what you see is what you get -- $900
-- Function 7 Rear Lower Control Arms for 92-95 Civic, 94-01 Integra -- $140
-- Golden Eagle Scatter Shield for B Series -- $125
-- Skunk2 Composite Fuel Rail for B Series (includes fittings on the end as pictured) -- $100
-- AEM 30-1060 EMS -- $700
-- Complete Fuel System (includes fuel lines with fittings, weldon 2015 fuel pump, aeromotive fuel filters, etc), just add your fuel rail and injectors and you are ready to go -- $750
________________ can include a sumped gas tank for EG as well for an additional cost or will sell individual parts as requested
-- BW S372r Turbocharger -- T4 Flange, 1.10 A/R -- used on a race car so not much mileage at all on the turbo itself, makes great power and nicely priced -- freshly coated black turbine housing -- $1200
-- GSR Cylinder Head with Supertech Valve Springs, Retainers, Valves -- includes the Valve cover as pictured, vtec solenoid and intake manifold gasket -- $1100
-- GSR Shortblock -- 84.5mm AEBS Sleeves with O-rings, Wiseco Pistons, Pauter Rods, AEBS Main Studs, GSR Crank, Moroso Oil Pan, Fluidampr, Circuit Worx Oil Pump Gear, OEM Water Pump, Head Studs -- what you see pictured is what you get
i am selling this block cheap to get it out of here and will recommend the new owner put new piston rings and bearings in it as i am unsure the exact history of the block -- i have taken this into consideration as well when pricing the block to leave room for the new owner to spend the appropriate money to perform those tasks -- $2200
-- OEM Integra Type R ( ITR ) Camshafts -- $300/pair
-- Window Net (needs to be recertified) -- $50
-- 5 Point Harness (needs to be recertified) -- $75
-- Autogage 5" Tachometer with Shift Light, black face, 10k rpm limit - $125
-- FJO Wideband -- complete with sensor, control box and gauge -- $300
-- Honda P28 ECU chipped for a DOHC Vtec Engine -- $140
-- Skunk2 Lowering Springs on OEM Shocks, completely assembled with top hats, etc, ready to bolt on -- fits 92-95 Civic, 94-01 Integra -- $225
Email -- James@IPGParts.com
Phone -- 407-324-4684
or PM
Email -- James@IPGParts.com
Phone -- 407-324-4684
or PM
-- AIR Carbon B16/B18 Intake Manifold -- Set up for 8 Injectors -- includes the lower fuel rail as pictured, manifold flange is drilled for both the B16 and GSR Head Pattern -- Great intake manifold -- what you see is what you get -- $900
-- Function 7 Rear Lower Control Arms for 92-95 Civic, 94-01 Integra -- $140
-- Golden Eagle Scatter Shield for B Series -- $125
-- Skunk2 Composite Fuel Rail for B Series (includes fittings on the end as pictured) -- $100
-- AEM 30-1060 EMS -- $700
-- Complete Fuel System (includes fuel lines with fittings, weldon 2015 fuel pump, aeromotive fuel filters, etc), just add your fuel rail and injectors and you are ready to go -- $750
________________ can include a sumped gas tank for EG as well for an additional cost or will sell individual parts as requested
-- BW S372r Turbocharger -- T4 Flange, 1.10 A/R -- used on a race car so not much mileage at all on the turbo itself, makes great power and nicely priced -- freshly coated black turbine housing -- $1200
-- GSR Cylinder Head with Supertech Valve Springs, Retainers, Valves -- includes the Valve cover as pictured, vtec solenoid and intake manifold gasket -- $1100
-- GSR Shortblock -- 84.5mm AEBS Sleeves with O-rings, Wiseco Pistons, Pauter Rods, AEBS Main Studs, GSR Crank, Moroso Oil Pan, Fluidampr, Circuit Worx Oil Pump Gear, OEM Water Pump, Head Studs -- what you see pictured is what you get
i am selling this block cheap to get it out of here and will recommend the new owner put new piston rings and bearings in it as i am unsure the exact history of the block -- i have taken this into consideration as well when pricing the block to leave room for the new owner to spend the appropriate money to perform those tasks -- $2200
-- OEM Integra Type R ( ITR ) Camshafts -- $300/pair
-- Window Net (needs to be recertified) -- $50
-- 5 Point Harness (needs to be recertified) -- $75
-- Autogage 5" Tachometer with Shift Light, black face, 10k rpm limit - $125
-- FJO Wideband -- complete with sensor, control box and gauge -- $300
-- Honda P28 ECU chipped for a DOHC Vtec Engine -- $140
-- Skunk2 Lowering Springs on OEM Shocks, completely assembled with top hats, etc, ready to bolt on -- fits 92-95 Civic, 94-01 Integra -- $225
Email -- James@IPGParts.com
Phone -- 407-324-4684
or PM
Last edited by Innes; 11-12-2009 at 02:05 PM.
#2
Thread Starter
iTrader: (3)
Re: FS: Fuel System, Sleeved Built GSR Block, GSR Head, S372r Turbo and More !!!
check out our new all motor project car -- https://honda-tech.com/forums/all-motor-naturally-aspirated-44/ipg-all-motor-car-project-2667047/
#4
Thread Starter
iTrader: (3)
Re: FS: Fuel System, Sleeved Built GSR Block, GSR Head, S372r Turbo and More !!!
i actually have exactly what is in the picture still available -- the other deal fell through, adjusted the price a bit to include the price for the 2nd gear as well, let me know if you are interested - thanks
#7
Thread Starter
iTrader: (3)
Re: FS: Fuel System, Sleeved Built GSR Block, GSR Head, S372r Turbo and More !!!
of course, no problem
email me at James@IPGParts.com with what pictures you want to see and i will take them and email them over - thanks.
Trending Topics
#13
Honda-Tech Member
Join Date: Feb 2008
Location: N. Florida
Posts: 949
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: Fuel System, Sleeved Built GSR Block, GSR Head, S372r Turbo and More !!!
would you be willing to sell the moroso oil pan? i have a stock one if you need something to put back on the motor.
#16
Thread Starter
iTrader: (3)
Re: FS: Fuel System, Sleeved Built GSR Block, GSR Head, S372r Turbo and More !!!
yes, email me at James@IPGParts.com and I will send it right over.
#24
Thread Starter
iTrader: (3)
Re: FS: Fuel System, Sleeved Built GSR Block, GSR Head, S372r Turbo and More !!!
yes, still available, can ship as soon as tomorrow -- can accept paypal at Sales@IPGParts.com or a CC over the phone at 407-324-4684 for payment
$149 shipped in the continental 48 states
#25
Honda-Tech Member
Join Date: Feb 2008
Location: Baytown, texas, u.s.a
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: Fuel System, Sleeved Built GSR Block, GSR Head, S372r Turbo and More !!!
yes, still available, can ship as soon as tomorrow -- can accept paypal at Sales@IPGParts.com or a CC over the phone at 407-324-4684 for payment
$149 shipped in the continental 48 states
$149 shipped in the continental 48 states