Head Unit Intall - Constant 4V?!?!
01-12-2010, 10:11 PM
#1
Junior Member
Thread Starter
Join Date: Sep 2009
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Head Unit Intall - Constant 4V?!?!
Trying to install a new JVC head unit. Nothing fancy, just your basic in dash cd player.
I'm replacing an old Pioneer deck that was working fine except it wouldn't eject CDs anymore.
After wiring everything in, the new JVC deck doesn't turn on. I took a voltmeter to the wiring and the ignition wire and ground wire checked out, but the constant power wire is only giving off 4 volts. Any ideas?
I'm replacing an old Pioneer deck that was working fine except it wouldn't eject CDs anymore.
After wiring everything in, the new JVC deck doesn't turn on. I took a voltmeter to the wiring and the ignition wire and ground wire checked out, but the constant power wire is only giving off 4 volts. Any ideas?
01-12-2010, 11:28 PM
#2
Honda-Tech Member
iTrader: (1)
Join Date: Oct 2005
Location: 99 probs but a stolen car aint 1, ca, cerritos/fullerton
Posts: 9,716
Likes: 0
Received 3 Likes
on
3 Posts
Re: Head Unit Intall - Constant 4V?!?!
Check the fuse under the hood. Its a 7.5amp. Also check the fuse under the driver kick pannel.
Thread
Thread Starter
Forum
Replies
Last Post
