Clifford Super Nova II removal help
08-16-2004, 12:29 AM
#1
Thread Starter
Join Date: Jul 2004
Location: Frisco, CA, USA
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Clifford Super Nova II removal help
I have a Clifford Super Nova II alarm installed a long, long time ago. It is broken. It won't unlock doors, will go crazy out of the blue, and will only behave somewhat in valet mode. Clifford website sucks when it comes to support. They only posts the manual (which I still have) and not the wiring specifications, etc. Anyone knows how I can remove the brain to return my car to its original state before the alarm installation? Anything?
08-16-2004, 08:16 AM
#2
Join Date: Aug 2004
Location: Edmond, Ok, USA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Re: Clifford Super Nova II removal help (Drakko)
Depending on how it was installed it could be as easy as removing some t taps. You main concern should be the starter interupt that should have been installed. Basically you eill need to reconnect those wires back together with a but connector or solder it and tape it.
If you do not feel comfortable with doing this yourself take it to a shop and have it done. Some shops that will remove what they install for free.
I know this sounds easy but I also have 11 years experience doing it. It is not hard but it should be done right otherwise your car may not start.
If you do not feel comfortable with doing this yourself take it to a shop and have it done. Some shops that will remove what they install for free.
I know this sounds easy but I also have 11 years experience doing it. It is not hard but it should be done right otherwise your car may not start.
08-16-2004, 05:19 PM
#3
Old Fart
Join Date: May 2004
Location: kelowna, bc, canada
Posts: 26,173
Likes: 0
Received 14 Likes
on
14 Posts
Re: Clifford Super Nova II removal help (Drakko)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Drakko »</TD></TR><TR><TD CLASS="quote">I have a Clifford Super Nova II alarm installed a long, long time ago. It is broken. It won't unlock doors, will go crazy out of the blue, and will only behave somewhat in valet mode. Clifford website sucks when it comes to support. They only posts the manual (which I still have) and not the wiring specifications, etc. Anyone knows how I can remove the brain to return my car to its original state before the alarm installation? Anything?
</TD></TR></TABLE> 1- find alarm brain
2- remove alarm brain,[unplug]
3- one by one follow each wire from alarm brain to where it is connected, remove and repair OEM wire, [elec.tape and a wiretye]
4- remove impact sen.,siren,LED,override switch and there wiring.
And as Rev_Auto said if you have startercut installed you will have to remove a relay, you will find the relay at the end of one of the wires from the alarm plug/s, you will have to rejoin the starter wires to each other once you remove the relay,[black/white most Hondas] that is best done by soldering.
94
</TD></TR></TABLE> 1- find alarm brain
2- remove alarm brain,[unplug]
3- one by one follow each wire from alarm brain to where it is connected, remove and repair OEM wire, [elec.tape and a wiretye]
4- remove impact sen.,siren,LED,override switch and there wiring.
And as Rev_Auto said if you have startercut installed you will have to remove a relay, you will find the relay at the end of one of the wires from the alarm plug/s, you will have to rejoin the starter wires to each other once you remove the relay,[black/white most Hondas] that is best done by soldering.
94
Thread
Thread Starter
Forum
Replies
Last Post
