Booy

Hello all,

I have successfully installed a Viper 5904 security system on my ride Honda Odyssey 2009. And I have add on a Viper - Programmable Voice System*516L to my ride. I have get it wired according to what the guide saids. when my car get remote starts, it will speak "Valet starting engine, stand clear". However when I armed or disarmed my ride, only the security system will "chirp" and lock/unlock, but the Siren will not say "Viper armed" and "Viper Disarmed". May I know how I can get it solved?

Am I set to an "silent mode" or valet mode"?
I have checked the 516L Ground-When-Armed wire was connected to the ground-when-armed input on the secutiry system.

Many thanks if anyone can offer help and advice, since I have been stucking for this case for days. Thanks!

Booy

I found there were no signal on my GWA input, may I know if my system is not working?

raverx3m

iTrader: (1)

lol are you serious?

audioroach

all viper systems have a wire that gives ground when armed. on the 5xxx series you can also configure another output to do the same but you need a bitwiter.