EJ_Allmota | EJ1 Reincarnation
#51
Honda-Tech Member
Thread Starter
Re: EJ_Allmota | EJ1 Reincarnation
UPDATE: Ive started reassembling my front suspension.. Still need to order some new brake rotors since the ones i had were completely rusted, also I need to order front sway bar end links for my ITR sway bar.. Also I just got my engine bottom end parts back from the machine shop.. Bottom end is now balanced, crank shaft was polished, Supertech 12.4:1 compression pistions were mounted on shot peened LS rods and 10lb flywheel was balanced..
DSC_1879 by Khris H., on Flickr
DSC_1863 by Khris H., on Flickr
DSC_1894 by Khris H., on Flickr
DSC_1907 by Khris H., on Flickr
DSC_1919 by Khris H., on Flickr
DSC_1879 by Khris H., on Flickr
DSC_1863 by Khris H., on Flickr
DSC_1894 by Khris H., on Flickr
DSC_1907 by Khris H., on Flickr
DSC_1919 by Khris H., on Flickr
#53
Re: EJ_Allmota | EJ1 Reincarnation
Oh, man...! Never thought I'd live to see THIS comeback!
Good to have you back in the game, specially with the second version of the snow white, Khris! The first one was a major inspiration and now that my EJ1 is back to bone stock, will be checking this new build for sure.
Keep it up, man!
Good to have you back in the game, specially with the second version of the snow white, Khris! The first one was a major inspiration and now that my EJ1 is back to bone stock, will be checking this new build for sure.
Keep it up, man!
#54
Honda-Tech Member
Thread Starter
Re: EJ_Allmota | EJ1 Reincarnation
Oh, man...! Never thought I'd live to see THIS comeback!
Good to have you back in the game, specially with the second version of the snow white, Khris! The first one was a major inspiration and now that my EJ1 is back to bone stock, will be checking this new build for sure.
Keep it up, man!
Good to have you back in the game, specially with the second version of the snow white, Khris! The first one was a major inspiration and now that my EJ1 is back to bone stock, will be checking this new build for sure.
Keep it up, man!
Some new parts arrived Thursday morning and I decided to refresh an old one to suit the current colour scheme..
Brand new slotted rotors for all four corners
DSC_2018 by Khris H., on Flickr
Front sway bar endlinks for my ITR sway bar
DSC_2029 by Khris H., on Flickr
Painted the inserts to match my my engine bay and inside of the car..
DSC_2019 by Khris H., on Flickr
#55
Honda-Tech Member
Thread Starter
Re: EJ_Allmota | EJ1 Reincarnation
Rear suspension put back together.. Cell phone photo.. ASR Brace, Function From Type 1 coilovers, Function Form LCA and ASR 24mm sway bar all installed..
20140503_234227 by Khris H., on Flickr
20140503_234227 by Khris H., on Flickr
#56
Honda-Tech Member
Thread Starter
#57
Honda-Tech Member
Thread Starter
Re: EJ_Allmota | EJ1 Reincarnation
Separated my headlight harness and ran it through the fender rails.. Didn't really plan on tucking anything but since I had the harness all apart from removing all ABS wire, I thought why the hell not..
All ABS wiring removed by Khris H., on Flickr
Headlight harness tuck by Khris H., on Flickr
Almost forgot I only had two of my Rota Slipstreams polished.. Back to work i go on the other two.. 800grit was done, got started and finished on 1000 grit (all by hand)..
Before 1000 Grit wet sand by Khris H., on Flickr
Before 1000 Grit wet sand by Khris H., on Flickr
After 1000Grit
After 1000 Grit wet sand by Khris H., on Flickr
After 1000 Grit wet sand by Khris H., on Flickr
All ABS wiring removed by Khris H., on Flickr
Headlight harness tuck by Khris H., on Flickr
Almost forgot I only had two of my Rota Slipstreams polished.. Back to work i go on the other two.. 800grit was done, got started and finished on 1000 grit (all by hand)..
Before 1000 Grit wet sand by Khris H., on Flickr
Before 1000 Grit wet sand by Khris H., on Flickr
After 1000Grit
After 1000 Grit wet sand by Khris H., on Flickr
After 1000 Grit wet sand by Khris H., on Flickr
#59
Honda-Tech Member
Thread Starter
Re: EJ_Allmota | EJ1 Reincarnation
Never planned to go too crazy with clearing out the engine bay, mainly just focused on cleaning up wires so I with that being said I re-installed my stock brake lines..
No brake line tuck for me by Khris H., on Flickr
No brake line tuck for me 2 by Khris H., on Flickr
No brake line tuck for me by Khris H., on Flickr
No brake line tuck for me 2 by Khris H., on Flickr
#60
Honda-Tech Member
Thread Starter
Re: EJ_Allmota | EJ1 Reincarnation
Installed my ITR brake booster, S2000 Clutch Master Cylinder as well as installed my Integra Type-RX pedals that ive had for over 6 years..
Making progess by Khris H., on Flickr
New pedals by Khris H., on Flickr
1000 Grit result by Khris H., on Flickr
Making progess by Khris H., on Flickr
New pedals by Khris H., on Flickr
1000 Grit result by Khris H., on Flickr
Last edited by EJ_ALLMOTA; 07-20-2014 at 07:19 PM.
#61
Honda-Tech Member
Thread Starter
#62
Honda-Tech Member
Thread Starter
Re: EJ_Allmota | EJ1 Reincarnation
Just some updates....
Re-installed my fuse box as well as separated and re-wrapped my engine harness plugs.. Headlight, AC and horn wires are now ran through the inner fender..
DSC_6280 by Khris H., on Flickr
Integra Type-RX pedals installed..
DSC_6272 by Khris H., on Flickr
Upon attempting to re-install my climate control air boxes I noticed that the foam that helps route the air from the boxes to the vents were just about non existent.. I decided to get some weather stripping and fix create a proper seal so that air isn't just being thrown under the dash and are actually making its way to the vents..
DSC_6305 by Khris H., on Flickr
Air boxes almost completely re-installed, just one left to do..
DSC_6299 by Khris H., on Flickr
Re-installed my fuse box as well as separated and re-wrapped my engine harness plugs.. Headlight, AC and horn wires are now ran through the inner fender..
DSC_6280 by Khris H., on Flickr
Integra Type-RX pedals installed..
DSC_6272 by Khris H., on Flickr
Upon attempting to re-install my climate control air boxes I noticed that the foam that helps route the air from the boxes to the vents were just about non existent.. I decided to get some weather stripping and fix create a proper seal so that air isn't just being thrown under the dash and are actually making its way to the vents..
DSC_6305 by Khris H., on Flickr
Air boxes almost completely re-installed, just one left to do..
DSC_6299 by Khris H., on Flickr
#65
Honda-Tech Member
Thread Starter
Re: EJ_Allmota | EJ1 Reincarnation
thanks man..
#69
Honda-Tech Member
Thread Starter
#70
Honda-Tech Member
Thread Starter
Re: EJ_Allmota | EJ1 Reincarnation
I decided since I'm looking to start putting my motor together id make a slight upgrade.. My last Vtec head was quite noisy with my Skunk2 Pro1s so to avoid that again upgraded my Lost Motion Assembly especially since I will be running Pro2s in this head.. Picked up the Skunk2 Lost Motion Assembly..
DSC_6478 by Khris H., on Flickr
DSC_6486 by Khris H., on Flickr
DSC_6487 by Khris H., on Flickr
DSC_6478 by Khris H., on Flickr
DSC_6486 by Khris H., on Flickr
DSC_6487 by Khris H., on Flickr
#71
HT's TOP CHEF
iTrader: (1)
Join Date: Apr 2006
Location: DICKIES & FLIP FLOPS, FL
Posts: 7,548
Likes: 0
Received 0 Likes
on
0 Posts
Re: EJ_Allmota | EJ1 Reincarnation
Great progress man!!!! Nice to see you back and looking forward to dyno numbers on that motor. I need to do my fender wells on the crx. What did you use top clean it all before you sprayed the rustoleom? I was thinking of using that por15 cleaner.
#72
Honda-Tech Member
Thread Starter
Re: EJ_Allmota | EJ1 Reincarnation
Thanks Chef.. I just just some degreaser and a scrubbing brush, lol.. I have heard good thing about that Por15 though.. My homie teg97 used it on his ITR build..
#75
Honda-Tech Member
Thread Starter
Re: EJ_Allmota | EJ1 Reincarnation
Finally got around to installing my dash board and installed a Walbro 255 fuel pump.. Will hopefully start working on my fuel lines tomorrow..
DSC_0003 by Khris H., on Flickr