HondacivDX

http://cgi.ebay.com/ebaymotors/ws/eB...=STRK:MEWAX:IT was wondering if this was a good deal...its going on a b16a2 motor was gonna built it with all skunk 2 (springs,retainers,valves) opinions would be great ...dnt kno what cams are going in undecided on that but the setup is a 1998 civic b16a2 sway running obd2 still...stock bottom end btw

PyroProblem

That's a really good price if its a good quality casting and the machining is spot on...
Bump cause I'm interested as well...
You might have to purchase it and report back on the quality

Str8EJ

I'm going to say probably not.
My last valve job + resurface cost 250.
They're asking 250 obo for a complete head.
Does not compute.

HondacivDX

i think i am there a warranty on it so even if i got to spend a little extra at the machine shop making sure its good it be worth it. i emailed the guy it suppose to flow better than a stock type r which is nice so idk itll be a learning experience....

Str8EJ

Well, based on what I've learned, OE is always best.
Good luck.

cibao2ner

the thing is that right now 9/10 heads out there are garbage...messed up threads all over..broken bolts..etc...it adds up..unless u get it from a virgin engine and send it to the machine shop they are hard to find in good condition....i would try it if i needed one again...

kyden

that's a bare head. not to mention its probably a really bad cast. you'll still have to buy rockers and such.