Safe RPM with b16a2 stock bottom end
#1
Thread Starter
Join Date: Nov 2005
Location: Warsaw, Poland
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Safe RPM with b16a2 stock bottom end
Hi,
What do yo uthink are safe rpm for stock b16a2 block?
Head is p&p, milled, with toda cams and bc valvetrain. Now I'm going to tune it with crome and am wondering how high can I set the redline. Will 9k rpm be ok?
thanks
What do yo uthink are safe rpm for stock b16a2 block?
Head is p&p, milled, with toda cams and bc valvetrain. Now I'm going to tune it with crome and am wondering how high can I set the redline. Will 9k rpm be ok?
thanks
#4
Re: Safe RPM with b16a2 stock bottom end (2000turbogsr)
9k is safe in my books, my b16a has been to 9k numerous times and was running strong until the day it came out of my car. Good luck!
#7
Re: Safe RPM with b16a2 stock bottom end (easy_rider)
i ran my b16a3 with crower stage 3 cams and dual valve springs to 10k all day every day so at least 10 if not more!
Thread
Thread Starter
Forum
Replies
Last Post
bluesaint
All Motor / Naturally Aspirated
3
09-02-2006 09:21 PM
egvtec
All Motor / Naturally Aspirated
20
08-14-2005 08:02 AM
Prevail
Honda Civic / Del Sol (1992 - 2000)
15
07-03-2002 04:13 PM