My all motor B16-need help on PFC
#1
Honda-Tech Member
Thread Starter
My all motor B16-need help on PFC
Hi Guys,
I just bought a EG with a b16 swap, mods are as follows:
* B16 Gen 2 LSD
* Type-R intake manifold and TB
* Type-R stock headers
* Type-R internals
* Koyo Radiator
* Springs and Retainers
* HKS CarbonFibr TI exhaust with 2.5"
* D2 coilovers
* Using PowerFC (B16b)
So currently i guess my powerFC is all stock config, nothing seems to be change. is there anyone who can tell me how can i increase rev? (when i go to Setting-> idle/rev: Rev limit is 0 RPM there and i still can rev 8.8k i assume this is because of the stock map on my B16b PFC)
Same goes for timing, Setting-> timing is all 50 across the board, what does that means? i cant go any lower then stock but i can increase it. what if i have to reduce my timing? how can i do so?
Anyone using pfc please explain and help
I just bought a EG with a b16 swap, mods are as follows:
* B16 Gen 2 LSD
* Type-R intake manifold and TB
* Type-R stock headers
* Type-R internals
* Koyo Radiator
* Springs and Retainers
* HKS CarbonFibr TI exhaust with 2.5"
* D2 coilovers
* Using PowerFC (B16b)
So currently i guess my powerFC is all stock config, nothing seems to be change. is there anyone who can tell me how can i increase rev? (when i go to Setting-> idle/rev: Rev limit is 0 RPM there and i still can rev 8.8k i assume this is because of the stock map on my B16b PFC)
Same goes for timing, Setting-> timing is all 50 across the board, what does that means? i cant go any lower then stock but i can increase it. what if i have to reduce my timing? how can i do so?
Anyone using pfc please explain and help
#4
Honda-Tech Member
Thread Starter
Re: My all motor B16-need help on PFC
The problem with me is that my PowerFC under settings->rev limit
i see revlimit set to 0 though i can rev upto 7800rpm and when i change this setting to 3000 and go back it again sets itself automatically to 0 (back to the same setting as before)
i see revlimit set to 0 though i can rev upto 7800rpm and when i change this setting to 3000 and go back it again sets itself automatically to 0 (back to the same setting as before)
Thread
Thread Starter
Forum
Replies
Last Post
thedirty-Dseries
Forced Induction
1
04-11-2006 03:48 PM