Looking for advice on N/A H22 Build
#78
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Location: Lock Haven, PA
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Re: Looking for advice on N/A H22 Build
They appear to be in great shape and the guy I bought them from said he just had them cleaned and tested when he bought them. I can't prove that but judging by how clean they look on the outside, I'll take my chances.
On another note, I just stripped one of the allen head bolts on my S2 tuner cam gears. I dont like the idea of running only 5 bolts on one of my cam gears. Plus I figure if one stripped then the others are probably going to start doing the same thing. So I'm now in the market for a new set of cam gears. It sucks bc I have to redo the tension on the belts.
On another note, I just stripped one of the allen head bolts on my S2 tuner cam gears. I dont like the idea of running only 5 bolts on one of my cam gears. Plus I figure if one stripped then the others are probably going to start doing the same thing. So I'm now in the market for a new set of cam gears. It sucks bc I have to redo the tension on the belts.
#79
Re: Looking for advice on N/A H22 Build
Does anyone one have a build sheet for the h22. Planning on doing a build myself just want to cross all my t' s and dot my I' s. Don't want to waste a nice engine and money
#80
Re: Looking for advice on N/A H22 Build
Did a full h22 fully built, did me good takes more than a b series cash wise to build but had no regrets. got some h22 parts lmk if your interested or get stuck on your build
#81
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Location: Lock Haven, PA
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Re: Looking for advice on N/A H22 Build
I just tried to install my distributor and its sitting crooked on the head when I try to bolt it down. I tried turning it 180 to see if that was the problem but that didn't help. Its only off by a millimeter or two but something just doesn't fit right. I just put the head on the motor and everything else fit great. Any ideas what the problem may be? I'm hoping it's something stupid and not something thats going to set me back again.
#83
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Location: Lock Haven, PA
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Re: Looking for advice on N/A H22 Build
Finally had my car tuned by Jeff Evans on saturday 12/10. It did 220 and I'm pretty happy with it for not touching anything on the bottom end. The powerband is nice and smooth. If anyone is considering going to Evans Tuning for their tune I highly recommend it. I'll post a scan of my dyno graph here as soon as I figure out how to use my Kodak AIO.
#84
Honda-Tech Member
Join Date: Jun 2003
Location: Tampa, Florida, USA
Posts: 417
Likes: 0
Received 0 Likes
on
0 Posts
#86
Honda-Tech Member
Join Date: Nov 2007
Location: Jersey City, NJ, U.S.A
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Re: Looking for advice on N/A H22 Build
Bump as your thread has been very interesting from the get-go.
I have recently acquired two motors myself (a race-prepped H22 and a stock motor) i like what you did with your motor and would love to do something similar in an EG body.
I have recently acquired two motors myself (a race-prepped H22 and a stock motor) i like what you did with your motor and would love to do something similar in an EG body.
#87
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Location: Lock Haven, PA
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Re: Looking for advice on N/A H22 Build
Thank you sir. I appreciate that. I hope your build goes good for you.
#91
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Location: Lock Haven, PA
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Re: Looking for advice on N/A H22 Build
Cool...those are decent numbers for mild mods. I see you live in PA. How far are you from 17745? I'm halfway between Williamsport and State College.
Thread
Thread Starter
Forum
Replies
Last Post
Speedfiend97LX
All Motor / Naturally Aspirated
5
04-03-2018 08:04 AM
erocksitr
Northern California (Sales)
1
03-13-2008 09:04 PM