►► July - August | All Motor Classifieds | FS & WTB ◄◄
#1
►► July - August | All Motor Classifieds | FS & WTB ◄◄
**Rules**
- Each post must be started with FS OR WTB
- Do not reply or quote posts in this thread, PM for all questions
- Please do not post/type in ALL CAPS
What you CAN post in this thread:
- Engines/Any engine component
- Transmissions/Any drivetrain parts
- Electrical components such as ECU'S, ETC
What you CANNOT post in this thread
- No vehicles for sale
- No wheels
- No Brake or Suspension components
- No interior/exterior parts
Any violations of these basic rules, and the post will be deleted. You may or may not be issued infractions and you will lose participation in this thread.
- Each post must be started with FS OR WTB
- Do not reply or quote posts in this thread, PM for all questions
- Please do not post/type in ALL CAPS
What you CAN post in this thread:
- Engines/Any engine component
- Transmissions/Any drivetrain parts
- Electrical components such as ECU'S, ETC
What you CANNOT post in this thread
- No vehicles for sale
- No wheels
- No Brake or Suspension components
- No interior/exterior parts
Any violations of these basic rules, and the post will be deleted. You may or may not be issued infractions and you will lose participation in this thread.
#2
Honda-Tech Member
Join Date: Oct 2008
Location: Miami, Florida
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Re: ►► July - August | All Motor Classifieds | FS & WTB ◄◄
FS.
- Honda B16/B18 325CC Injector $125 Shipped
PM Offers
- Honda B16/B18 325CC Injector $125 Shipped
PM Offers
Last edited by dguzman; 07-10-2012 at 09:37 PM.
#3
Honda-Tech Member
iTrader: (2)
Join Date: Mar 2002
Location: Woodbridge, NJ, Middlesex
Posts: 5,828
Likes: 0
Received 1 Like
on
1 Post
Re: ►► July - August | All Motor Classifieds | FS & WTB ◄◄
built high compression K24 R40 longblock bored to 88mm with PRB Type S head...can also sell shortblock seprately...$make offer
various B-series 86mm bore Wiseco/Endyn rollerwave used pistons, some 84.5mm bore for 92mm storker crank and other JE 86mm bore high compression pistons...$cheap make offer.
various B-series 86mm bore Wiseco/Endyn rollerwave used pistons, some 84.5mm bore for 92mm storker crank and other JE 86mm bore high compression pistons...$cheap make offer.
#7
Moderator
iTrader: (14)
Re: ►► July - August | All Motor Classifieds | FS & WTB ◄◄
FS: Skunk2 Tuner 1 Camshafts - Perfect replacement for ITRs
They are BNIB and opened only to ensure that the cam card was inside. Even the tube tape has not been removed.
$500shipped to the lower 48 states. PM me please.
Buy with Confidence....If you need vouch information, please see here
http://m.htarchive.net/showthread.php?t=997589. An impeccable record for over 8 years. Can't get more solid than that.
Specifications are @1mm lift (.040" lift)
INTAKE lift- 11.58 mm, duration 252 @ 1mm
EXHAUST lift - 10.8 mm, duration 249 @1mm
From Skunk2
http://store.skunk2.com/engine-tunin...camshafts.html
No service hole to imply it is an OEM cam
Intake side shows current "N" Marking verified by Skunk2 - https://honda-tech.com/forums/all-motor-naturally-aspirated-44/new-skunk2-camshaft-markings-2957692/
They are BNIB and opened only to ensure that the cam card was inside. Even the tube tape has not been removed.
$500shipped to the lower 48 states. PM me please.
Buy with Confidence....If you need vouch information, please see here
http://m.htarchive.net/showthread.php?t=997589. An impeccable record for over 8 years. Can't get more solid than that.
Specifications are @1mm lift (.040" lift)
INTAKE lift- 11.58 mm, duration 252 @ 1mm
EXHAUST lift - 10.8 mm, duration 249 @1mm
From Skunk2
http://store.skunk2.com/engine-tunin...camshafts.html
No service hole to imply it is an OEM cam
Intake side shows current "N" Marking verified by Skunk2 - https://honda-tech.com/forums/all-motor-naturally-aspirated-44/new-skunk2-camshaft-markings-2957692/
Trending Topics
#8
FSAE
Re: ►► July - August | All Motor Classifieds | FS & WTB ◄◄
All prices are non-negotiable. No trades. Paypal only. PM if interested.
I will ship UPS Ground.
FS: Barely Used 68mm Professional Products Throttlebody w/gasket (< 500 miles) - SOLD
FS: OG Comptech Race Header w/custom SMSP Extension Pipe - $400 PLUS SHIPPING
Will fit any B-series with JDM length exhaust. This fit perfectly with my T1R 70mm catback.
FS: Password JDM Carbon Fiber Intake (J's replica) w/Brand New K&N Filter for ITR w/ABS - SOLD
I will ship UPS Ground.
FS: Barely Used 68mm Professional Products Throttlebody w/gasket (< 500 miles) - SOLD
FS: OG Comptech Race Header w/custom SMSP Extension Pipe - $400 PLUS SHIPPING
Will fit any B-series with JDM length exhaust. This fit perfectly with my T1R 70mm catback.
FS: Password JDM Carbon Fiber Intake (J's replica) w/Brand New K&N Filter for ITR w/ABS - SOLD
Last edited by 92TypeR; 07-22-2012 at 01:47 PM.
#9
Honda-Tech Member
Join Date: Sep 2005
Location: Lower Belews Creek, nc, usa
Posts: 504
Likes: 0
Received 0 Likes
on
0 Posts
Re: ►► July - August | All Motor Classifieds | FS & WTB ◄◄
Wtb: b18 header with good ground clearance, nothing that has stacked primaries under the oil pan, must sit even or above the bottom of the oil pan. For lsv in a low Crx. No hytec styles or 4-1's (unless bisi rep style). Reps are preferred for price. Lmk
#11
Honda-Tech Member
Join Date: Aug 2009
Location: NOR CAL!
Posts: 749
Likes: 0
Received 0 Likes
on
0 Posts
Re: ►► July - August | All Motor Classifieds | FS & WTB ◄◄
Ferrea 6000 series valves with 5000 miles on them standard size for an LS 125$ shipped anyewhere.
b20b intake many 30$
b18b1 head, bare. unknow miles 40$
b20b intake many 30$
b18b1 head, bare. unknow miles 40$
#12
Honda-Tech Member
Join Date: Apr 2004
Location: Minnesota
Posts: 7,489
Likes: 0
Received 0 Likes
on
0 Posts
Re: ►► July - August | All Motor Classifieds | FS & WTB ◄◄
Tapping out
Skunk2 Pro series valvetrain
Skunk2 titanium retainers
Skunk2 h22 spring base kit
Skunk2 High compression valves
$500
Mystery cams(I've done research and come to conclusion that they could be pro1's)
$300
Skunk2 Pro2 cams
(currently still in my motor)
$450
all prices negotiable. Everything is for an H22. Prices do not include shipping
Skunk2 Pro series valvetrain
Skunk2 titanium retainers
Skunk2 h22 spring base kit
Skunk2 High compression valves
$500
Mystery cams(I've done research and come to conclusion that they could be pro1's)
$300
Skunk2 Pro2 cams
(currently still in my motor)
$450
all prices negotiable. Everything is for an H22. Prices do not include shipping
#13
Honda-Tech Member
Join Date: Nov 2001
Location: California
Posts: 3,562
Likes: 0
Received 0 Likes
on
0 Posts
Re: ►► July - August | All Motor Classifieds | FS & WTB ◄◄
Header is used but in mint condition. No dents or heavy scratches.
Came off of Stephan Papadakis's Honda Challenge race car.
Made for High Compression SOHC 1.6L - 1.8L D Series. Can work with D16A1 or ZC DOHC with mods.
$850 Shipped OBO Located in Southern California.
Hit my privates for more info.
Came off of Stephan Papadakis's Honda Challenge race car.
Made for High Compression SOHC 1.6L - 1.8L D Series. Can work with D16A1 or ZC DOHC with mods.
$850 Shipped OBO Located in Southern California.
Hit my privates for more info.
#14
Honda-Tech Member
Join Date: Jan 2004
Location: Centerville, Utah
Posts: 2,596
Likes: 0
Received 0 Likes
on
0 Posts
Re: ►► July - August | All Motor Classifieds | FS & WTB ◄◄
FS. B series toda replica by plm no dents, ran very well. 1 3/4 at the primaries, tri y tube header 2.5 at the flange. Made 256 whp with my setup. 350 plus shipping. paypal add 3%
Custom drag header 1 7/8 primary, tri y tube header. 3 inch collector at the flange. VHT coated. perfect condition no dents! For drag racing. Made 7 hp plus over the toda replica up top using e85 with 12.4 a/fs. 375 plus shipping.
I am switching to a 4-1 full drag header.
BNIB polished b series golden eagle fuel rail. 100.00.
Send pm to request pictures to your email.
Custom drag header 1 7/8 primary, tri y tube header. 3 inch collector at the flange. VHT coated. perfect condition no dents! For drag racing. Made 7 hp plus over the toda replica up top using e85 with 12.4 a/fs. 375 plus shipping.
I am switching to a 4-1 full drag header.
BNIB polished b series golden eagle fuel rail. 100.00.
Send pm to request pictures to your email.
#18
Honda-Tech Member
Join Date: Oct 2003
Location: CITY BY THE BAY, ca, usa
Posts: 2,182
Likes: 0
Received 0 Likes
on
0 Posts
Re: ►► July - August | All Motor Classifieds | FS & WTB ◄◄
Selling my brand new SSR/DTR outlaw race header made for EG with a k24(built of course) with room to make more power with a bigger engine set up.exits out of the hood Paid $1400 selling for $1100 will ship at buyers expense someone come take it off my hands!
#19
Honda-Tech Member
Re: ►► July - August | All Motor Classifieds | FS & WTB ◄◄
aem fuel rail for B series. comes with aem fpr. silver in color 100 shipped obo.
Last edited by K7-1Ktrevor; 08-20-2012 at 12:01 AM. Reason: added pics.
#21
Honda-Tech Member
Join Date: Aug 2004
Location: 161822, ca, L.A.
Posts: 1,026
Likes: 0
Received 0 Likes
on
0 Posts
Re: ►► July - August | All Motor Classifieds | FS & WTB ◄◄
For sale: H22 Alternator $40
H22 half shaft $40
Innovative H22 conversion mount for 90-93 accord $70
H22 alternator relocation kit $65
H22 Distributor $60
AEM H22 Fuel rail with AN fittings (silver) $65
d16y7 short block $100
f22a (91 accord) engine complete $300
90-93 accord auto transmission $150
Call or text (909) 979-1751
H22 half shaft $40
Innovative H22 conversion mount for 90-93 accord $70
H22 alternator relocation kit $65
H22 Distributor $60
AEM H22 Fuel rail with AN fittings (silver) $65
d16y7 short block $100
f22a (91 accord) engine complete $300
90-93 accord auto transmission $150
Call or text (909) 979-1751
#25
Honda-Tech Member
iTrader: (1)
Join Date: Nov 2009
Location: OREGON
Posts: 1,020
Likes: 0
Received 0 Likes
on
0 Posts
Re: ►► July - August | All Motor Classifieds | FS & WTB ◄◄
motor is still assembled, nikos and blazed can vouch for what it is, wont tear it apart until big parts are paid for.
i bought the motor from nikos's "300+whp pump gas street motor" build thread, it has just been sitting around my place waiting for a home, everything is essentially new just a few tuning miles.
only tuning that got done was the base tune it did hit 300whp at 8000 rpm :wow: but due to life circumstances he couldnt finish it up and i never finished it up.
local buyers get brand new mobil 1 oil and honda tranny fluid and spoon drain plugs.
final specs of the motor:
-k24 block built by ERL
-89mm ERL superdeck sleeves
-IPS stroker kit 101.6mm x 89mm bore
-12.5:1 compression JE pistons IPS spec full featured
-IPS spec cunningham rods
-Castillo treated and stroker OEM crank from 2008 acura RDX
-s2000 oil pump ERL kit
-ACL bearings
-Calico coatings applied to crank, pistons, rods
-365 CFM Ported and polished head by Mission Critical Performance
-IPS KXV cams
-IPS manifold with 90mm accufab throttle body
-RDX modified injectors
-Header 4-1 stainless megaphone made by Stefan at ASP
tranny specs, this is brand new never used, built just for me
-k20a2 tranny case
-complete brand new tsx trainwreck tranny internals(4.7fd, long 6th gear)
-brand new quaife lsd
-clutchmaster clutch
-type r flywheel
-shifter box with Pspec short shifter
new flywheel cover and shift cable mounting hardware
Hondata kpro
brand new dss 2.9 axles for ekk2 with 36mm
whole swap is for sale, prices: obo, big parts sell first
short block $5k
head $3k (minus cams, and intake manifold setup
intake manifold $2k
header $1k with new gasket
fuel setup(fuel lines, regulater, etc, fuel rail, injectors, etc) $700
tranny with shifterbox/ss, shift lines $3k
cams: best offer :wow:
dss axles $500
36mm 5lug new rotors/pads/bearings/hub/bushings $1000
kpro: best offer
hybrid eg/dc mounts new custom candy powder
hybrid eg/dc harness
hybrid power steering kit universal, never taken out of box
blue samco hoses
koyo dc5 radiator
kevlar fuel pump covers for integra dc2
so clean you can eat off it:
standard size water bottle for size comparison
https://honda-tech.com/forums/k-series-153/300whp-ips-k24a-93-octane-making-impossible-possible-2290806/
i bought the motor from nikos's "300+whp pump gas street motor" build thread, it has just been sitting around my place waiting for a home, everything is essentially new just a few tuning miles.
only tuning that got done was the base tune it did hit 300whp at 8000 rpm :wow: but due to life circumstances he couldnt finish it up and i never finished it up.
local buyers get brand new mobil 1 oil and honda tranny fluid and spoon drain plugs.
final specs of the motor:
-k24 block built by ERL
-89mm ERL superdeck sleeves
-IPS stroker kit 101.6mm x 89mm bore
-12.5:1 compression JE pistons IPS spec full featured
-IPS spec cunningham rods
-Castillo treated and stroker OEM crank from 2008 acura RDX
-s2000 oil pump ERL kit
-ACL bearings
-Calico coatings applied to crank, pistons, rods
-365 CFM Ported and polished head by Mission Critical Performance
-IPS KXV cams
-IPS manifold with 90mm accufab throttle body
-RDX modified injectors
-Header 4-1 stainless megaphone made by Stefan at ASP
tranny specs, this is brand new never used, built just for me
-k20a2 tranny case
-complete brand new tsx trainwreck tranny internals(4.7fd, long 6th gear)
-brand new quaife lsd
-clutchmaster clutch
-type r flywheel
-shifter box with Pspec short shifter
new flywheel cover and shift cable mounting hardware
Hondata kpro
brand new dss 2.9 axles for ekk2 with 36mm
whole swap is for sale, prices: obo, big parts sell first
short block $5k
head $3k (minus cams, and intake manifold setup
intake manifold $2k
header $1k with new gasket
fuel setup(fuel lines, regulater, etc, fuel rail, injectors, etc) $700
tranny with shifterbox/ss, shift lines $3k
cams: best offer :wow:
dss axles $500
36mm 5lug new rotors/pads/bearings/hub/bushings $1000
kpro: best offer
hybrid eg/dc mounts new custom candy powder
hybrid eg/dc harness
hybrid power steering kit universal, never taken out of box
blue samco hoses
koyo dc5 radiator
kevlar fuel pump covers for integra dc2
so clean you can eat off it:
standard size water bottle for size comparison
https://honda-tech.com/forums/k-series-153/300whp-ips-k24a-93-octane-making-impossible-possible-2290806/