Jimmy

iTrader: (5)

**Rules**

- Each post must be started with FS OR WTB
- Do not reply or quote posts in this thread, PM for all questions
- Please do not post/type in ALL CAPS

What you CAN post in this thread:

- Engines/Any engine component
- Transmissions/Any drivetrain parts
- Electrical components such as ECU'S, ETC

What you CANNOT post in this thread

- No vehicles for sale
- No wheels
- No Brake or Suspension components
- No interior/exterior parts


Any violations of these basic rules, and the post will be deleted. You may or may not be issued infractions and you will lose participation in this thread.

dguzman

FS.

- Honda B16/B18 325CC Injector $125 Shipped

PM Offers

CHEETAH

iTrader: (2)

built high compression K24 R40 longblock bored to 88mm with PRB Type S head...can also sell shortblock seprately...$make offer

various B-series 86mm bore Wiseco/Endyn rollerwave used pistons, some 84.5mm bore for 92mm storker crank and other JE 86mm bore high compression pistons...$cheap make offer.

$MIKE$

iTrader: (13)

sold

$MIKE$

iTrader: (13)

wtb; blox B cams

spoolinvtec54

Itr intake manifold and b16 intake manifold. Make me a offer.

TheShodan

iTrader: (14)

FS: Skunk2 Tuner 1 Camshafts - Perfect replacement for ITRs

They are BNIB and opened only to ensure that the cam card was inside. Even the tube tape has not been removed.

$500shipped to the lower 48 states. PM me please.

Buy with Confidence....If you need vouch information, please see here
http://m.htarchive.net/showthread.php?t=997589. An impeccable record for over 8 years. Can't get more solid than that.

Specifications are @1mm lift (.040" lift)

INTAKE lift- 11.58 mm, duration 252 @ 1mm
EXHAUST lift - 10.8 mm, duration 249 @1mm

From Skunk2
http://store.skunk2.com/engine-tunin...camshafts.html




No service hole to imply it is an OEM cam




Intake side shows current "N" Marking verified by Skunk2 - https://honda-tech.com/forums/all-motor-naturally-aspirated-44/new-skunk2-camshaft-markings-2957692/

92TypeR

All prices are non-negotiable. No trades. Paypal only. PM if interested.

I will ship UPS Ground.

FS: Barely Used 68mm Professional Products Throttlebody w/gasket (< 500 miles) - SOLD

FS: OG Comptech Race Header w/custom SMSP Extension Pipe - $400 PLUS SHIPPING
Will fit any B-series with JDM length exhaust. This fit perfectly with my T1R 70mm catback.



FS: Password JDM Carbon Fiber Intake (J's replica) w/Brand New K&N Filter for ITR w/ABS - SOLD

md88hfcrx

Wtb: b18 header with good ground clearance, nothing that has stacked primaries under the oil pan, must sit even or above the bottom of the oil pan. For lsv in a low Crx. No hytec styles or 4-1's (unless bisi rep style). Reps are preferred for price. Lmk

blacK_Dc4

delete

teggi

Ferrea 6000 series valves with 5000 miles on them standard size for an LS 125$ shipped anyewhere.
b20b intake many 30$
b18b1 head, bare. unknow miles 40$

SL0WEGG

Tapping out

Skunk2 Pro series valvetrain
Skunk2 titanium retainers
Skunk2 h22 spring base kit
Skunk2 High compression valves

$500





Mystery cams(I've done research and come to conclusion that they could be pro1's)

$300

Skunk2 Pro2 cams
(currently still in my motor)

$450

all prices negotiable. Everything is for an H22. Prices do not include shipping

SuperTwinz

Header is used but in mint condition. No dents or heavy scratches.
Came off of Stephan Papadakis's Honda Challenge race car.
Made for High Compression SOHC 1.6L - 1.8L D Series. Can work with D16A1 or ZC DOHC with mods.





$850 Shipped OBO Located in Southern California.

Hit my privates for more info.

Antilag

FS. B series toda replica by plm no dents, ran very well. 1 3/4 at the primaries, tri y tube header 2.5 at the flange. Made 256 whp with my setup. 350 plus shipping. paypal add 3%

Custom drag header 1 7/8 primary, tri y tube header. 3 inch collector at the flange. VHT coated. perfect condition no dents! For drag racing. Made 7 hp plus over the toda replica up top using e85 with 12.4 a/fs. 375 plus shipping.

I am switching to a 4-1 full drag header.

BNIB polished b series golden eagle fuel rail. 100.00.

Send pm to request pictures to your email.

HNL.eg6

Wtb 310-370cc RC injectors

Lmk pm me

BlueR

iTrader: (10)

Prices reduced

djsimm89

msd 6al with dizzy cap and blaster coil for bseries $150 shipped

allmotaeg6

Selling my brand new SSR/DTR outlaw race header made for EG with a k24(built of course) with room to make more power with a bigger engine set up.exits out of the hood Paid $1400 selling for $1100 will ship at buyers expense someone come take it off my hands!

K7-1Ktrevor

aem fuel rail for B series. comes with aem fpr. silver in color 100 shipped obo.

kingofbattle909

iTrader: (6)

EF/CRX,PLACE RACING B-SERIES MOUNTS BNIB (some light scratches).
$250 OBO



















PM ME
LOCATED IN SO CAL[/QUOTE]

soulpwr

For sale: H22 Alternator $40
H22 half shaft $40
Innovative H22 conversion mount for 90-93 accord $70
H22 alternator relocation kit $65
H22 Distributor $60
AEM H22 Fuel rail with AN fittings (silver) $65
d16y7 short block $100
f22a (91 accord) engine complete $300
90-93 accord auto transmission $150
Call or text (909) 979-1751

$MIKE$

iTrader: (13)

.

Jimmynitro

wtb h22 single or dual top mount tb set up,,

JDM Tiger

WTB

2.9 b series ek axles

nastyARE

iTrader: (1)

motor is still assembled, nikos and blazed can vouch for what it is, wont tear it apart until big parts are paid for.

i bought the motor from nikos's "300+whp pump gas street motor" build thread, it has just been sitting around my place waiting for a home, everything is essentially new just a few tuning miles.

only tuning that got done was the base tune it did hit 300whp at 8000 rpm :wow: but due to life circumstances he couldnt finish it up and i never finished it up.

local buyers get brand new mobil 1 oil and honda tranny fluid and spoon drain plugs.

final specs of the motor:

-k24 block built by ERL
-89mm ERL superdeck sleeves
-IPS stroker kit 101.6mm x 89mm bore
-12.5:1 compression JE pistons IPS spec full featured
-IPS spec cunningham rods
-Castillo treated and stroker OEM crank from 2008 acura RDX
-s2000 oil pump ERL kit
-ACL bearings
-Calico coatings applied to crank, pistons, rods
-365 CFM Ported and polished head by Mission Critical Performance
-IPS KXV cams
-IPS manifold with 90mm accufab throttle body
-RDX modified injectors
-Header 4-1 stainless megaphone made by Stefan at ASP

tranny specs, this is brand new never used, built just for me

-k20a2 tranny case
-complete brand new tsx trainwreck tranny internals(4.7fd, long 6th gear)
-brand new quaife lsd
-clutchmaster clutch
-type r flywheel
-shifter box with Pspec short shifter
new flywheel cover and shift cable mounting hardware


Hondata kpro
brand new dss 2.9 axles for ekk2 with 36mm


whole swap is for sale, prices: obo, big parts sell first

short block $5k
head $3k (minus cams, and intake manifold setup
intake manifold $2k
header $1k with new gasket
fuel setup(fuel lines, regulater, etc, fuel rail, injectors, etc) $700
tranny with shifterbox/ss, shift lines $3k
cams: best offer :wow:
dss axles $500
36mm 5lug new rotors/pads/bearings/hub/bushings $1000
kpro: best offer

hybrid eg/dc mounts new custom candy powder
hybrid eg/dc harness
hybrid power steering kit universal, never taken out of box
blue samco hoses
koyo dc5 radiator
kevlar fuel pump covers for integra dc2

so clean you can eat off it:







standard size water bottle for size comparison




















https://honda-tech.com/forums/k-series-153/300whp-ips-k24a-93-octane-making-impossible-possible-2290806/