smileycvc

Alright i just dropped a poop load of money into my b20. Its fully built with pretty much the best parts I could get. I didnt reall skimp out on anything except maybe the bearings. I was using an LS crank with OEM LS brearings and eagle rods. Well after about 5k my motor lost a rod bearing and I now have a retarded load rod knock. Time for a rebuild again. Now I am going to get my rods notched and run GSR bearings and another LS crank. So my questions is will this work? Is it really going to be that reliable? When I built the motor I wanted to make it bulletproof and now I feel like its just gonna cause me more problems. What do you all think?

smileycvc

wow nobody

Forrest Gump 9

OEM bearing is the best you can buy. You should look into why you spun the bearing in the first place. Oil delivery failure, too tight of a clearance,.....BTW, I had a b20/vtec and it ran fine for the last 2 years, and still running after I sold it.

smileycvc

I know it wasnt oil delivery because I never lost oil pressure. Im gonna platigage this time to make sure the clearances are perfect.

Suck my DX

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by smileycvc &raquo;</TD></TR><TR><TD CLASS="quote">I know it wasnt oil delivery because I never lost oil pressure. Im gonna platigage this time to make sure the clearances are perfect. </TD></TR></TABLE>
you need to plastiguage every time