Is a -8AN fuel feed line too big for Walbro 255 inline?
11-19-2009, 06:16 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2006
Location: Nowhere'sville, No where
Posts: 1,024
Likes: 0
Received 0 Likes
on
0 Posts
Is a -8AN fuel feed line too big for Walbro 255 inline?
It has an inside diameter conversion of 1/2" and the -6AN has a 3/8" inside diameter conversion. I figured that the pump itself may have high pressure, but can't fill up, and keep filled up, a 1/2" hose quickly enough. That's why I was considering -6AN.
Can anyone relate to this? I would like to mount the little fuel cell up front under the hood if at all possible.
Can anyone relate to this? I would like to mount the little fuel cell up front under the hood if at all possible.
11-19-2009, 06:22 PM
#2
Honda-Tech Member
Re: Is a -8AN fuel feed line too big for Walbro 255 inline?
the -8AN should work just fine, the one thing you could use the -6AN would be the return line .......or your supply. either way both will work
Last edited by BigBlock22; 11-19-2009 at 06:40 PM.
11-19-2009, 08:22 PM
#3
Honda-Tech Member
iTrader: (1)
Join Date: Jun 2007
Location: newport news, VA, United States
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
Re: Is a -8AN fuel feed line too big for Walbro 255 inline?
once the line is filled, it should have no trouble keeping it filled. once filled, it will still be flowing the same amount of fuel.
Thread
Thread Starter
Forum
Replies
Last Post
MarkosMotorsports
Road Racing / Autocross & Time Attack
4
05-24-2004 06:58 PM
