Engine Swap compatibility
#1
Engine Swap compatibility
Hey guys,
So the engine on my 2004 6spd TSX crapped out on my last week and I have been trying to find a replacement motor. Just need something thats a straight swap but I cant seem to find any with decently low Kms. I did come across a JDM HONDA ACCORD EURO-R CL7 ACURA TSX K20A that one of the local JDM importers in Toronto. It comes complete with LSD tranny, drive shafts, ecu and wire harness.
The guy says its a direct fit and only real difference from the USDM motor is the red valve cover and its got a bit more power.
Now will this motor swap into my car with any real headaches? Like no crazy rewiring needed or mounts not lining up, etc?
I tried searching but I couldnt find a yes or no answer, or a yes answer with a bunch of "buts".
Any help is appreciated. thanks.
So the engine on my 2004 6spd TSX crapped out on my last week and I have been trying to find a replacement motor. Just need something thats a straight swap but I cant seem to find any with decently low Kms. I did come across a JDM HONDA ACCORD EURO-R CL7 ACURA TSX K20A that one of the local JDM importers in Toronto. It comes complete with LSD tranny, drive shafts, ecu and wire harness.
The guy says its a direct fit and only real difference from the USDM motor is the red valve cover and its got a bit more power.
Now will this motor swap into my car with any real headaches? Like no crazy rewiring needed or mounts not lining up, etc?
I tried searching but I couldnt find a yes or no answer, or a yes answer with a bunch of "buts".
Any help is appreciated. thanks.
#2
Re: Engine Swap compatibility
I would say yes because the engines are almost completely compatable , I know from experience the clutches are different but the motor you pickup I would swap your mounts onto it if there still in good shape and your wire harness should be fine to use with the motor. my tsx has a k24 block and a type r head I have no problems at all .
#3
Honda-Tech Member
Join Date: Dec 2006
Location: wi, usa
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
Re: Engine Swap compatibility
If you have kpro any motor would work. I have a turbo k24a4 in my tsx running kpro. Plus your have all mounts needed from your k24a2.
Thread
Thread Starter
Forum
Replies
Last Post