issues with ep3 fog lights install
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2006
Location: Bakersfield, California, U.S.
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
issues with ep3 fog lights install
OK so I was installing my 02 civic si fog lights today. I connected all the cables inside and sent the wire to the from to test the fogs before installing them. I turned on my headlights and the button lit up and I pushed the button on and you can hear the relay clicking on when I do it and the fog light sign lights up but my fog lights don't turn on. What could be the problem?
#2
Honda-Tech Member
Thread Starter
Join Date: Jan 2006
Location: Bakersfield, California, U.S.
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Re: issues with ep3 fog lights install
I check all the wiring and I followed all the directions not sure what I'm missing. Is there a way on how to test if there is volts going to the front wiring harness?
#5
Honda-Tech Member
Re: issues with ep3 fog lights install
^^ No tech post in the tech forum is the real nonsense. With over 13,000 posts I'd think you'd have read the FAQs.
#7
Honda-Tech Member
Re: issues with ep3 fog lights install
Yeah, it could be a bad ground if everything works but the actual lights. Are you getting voltage at the light sockets?
Thread
Thread Starter
Forum
Replies
Last Post