TeeHee

I search and couldn't find any result.

i bought an ebay fog light from edixworks.

I installed the fogs and fogs harness but am currently stuck on the switch harness.
here's a picture of the switch harness. http://i84.photobucket.com/albums/k2...-238388071.jpg

i got everything to fit, but the white plug that goes somewhere in the fuse box?
already plug in the relay, ground and switch plug.
http://i84.photobucket.com/albums/k2...209_161801.jpg
brown plug that goes into fuse box and brown plug that goes to hanging brown plug
http://i84.photobucket.com/albums/k2...209_161701.jpg
the fuse.
http://i84.photobucket.com/albums/k2...31209_1617.jpg
white plug that goes somewhere.

white plug suppose to go here but its not the right plug.http://i84.photobucket.com/albums/k2...-137209170.jpg
http://i84.photobucket.com/albums/k2...-137426031.jpg

any solution so i can make it work?

livedc5

I bought the same fog kit of ebay and ran into the same problem and i just ended up buying the oem wiring harness and switch cuz the the one that it comes with sucks ***!!

kPRO dz

it's not the greatest piece of wiring in the world.. you can either buy an oem harness, or you can hardwire it yourself!

MUGEN_EM1

it would be easier to wire the swith independently so you can have them on whenever you want instead of just with the low beams.

TeeHee

how would you wire the switch independently ?

kobeballer96

damn my ebay fogs for my ep3 was a cake. and the switch worked too for 45 dollars shipped! gl man that harndnesss looks wild.

red ignition power and yellow is continuous power, so use your brain

kPRO dz

PM me if you want a diagram of how you can install a switch.

I personally wired my fog lights to my corner lights

kobeballer96

this spring time we should cruise im only 15 mins from ellicot, city

kPRO dz

ill be in ellicott city in on thursday. did you attend any columbia car meets?

kobeballer96

noo for like honda - tech? i just go to hagerstown and chill there, there some cool ppl out there some nice cars same with Baltimore

sinisterdc5

i have the same i just wired them to my corner light the work fine

2004ep3hatch

Bad idea to do, you could fry your wires. The fogs take alot more current then those sidemarker light wiring are designed to handle.

This is what you should do, it's very easy. I used 12 gauge wire since i have HID's for fog lights.

kobeballer96

smart man ppl could use this it makes it easy for ppl that dont have the exp

d16_2_k20

Regarding the connection to the fusebox, what does it actually look like, or does it have that lable (IGN) on it? sorry for the nub question.

I would like the anytime switch since I have mine wired to running lights as well... thankz

edit: and which fusebox lol engine bay or under the dash

kobeballer96

under dash. the connector the goes in there is brown most of the time. research it