Cleaning dimpled dashboard
#1
Thread Starter
Join Date: Apr 2006
Location: athol, ma, 01331
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Cleaning dimpled dashboard
I have a RSX Type S and I want to clean the dimpled dashboard but I don't want to ruin it. I'm thinking about using a soft toothbrush and some mild soap. Just wondering if anyone has tried any other tactics...?
#2
Re: Cleaning dimpled dashboard (mdr411)
I usually spray cleaner onto a microfiber cloth and just wipe. It does the job, but then again, my car doesn't usually get too dirty. Microfiber works because no lint gets stuck in the dimples.
#3
Re: Cleaning dimpled dashboard (rsxylady)
To me, the dimpled dashboard was definitely a stupid move by Acura... It's obvious it will be hard to clean/keep clean... I'm thinking of using the brush attachment with my house vacuum, but not sure if that would work/mess up the dash? Anyone have any thoughts?
#4
Honda-Tech Member
Join Date: May 2006
Location: san jose, ca
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cleaning dimpled dashboard (reset2k)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by reset2k »</TD></TR><TR><TD CLASS="quote">To me, the dimpled dashboard was definitely a stupid move by Acura... It's obvious it will be hard to clean/keep clean... I'm thinking of using the brush attachment with my house vacuum, but not sure if that would work/mess up the dash? Anyone have any thoughts? </TD></TR></TABLE>
I deff agree with the dumb move on the dash.first time i tried cleanin it there was lint left over everywhere.not only that but u cant get the small holes cleared.i havent cleaned it since.i figures ima just use the armor all wipes.
I deff agree with the dumb move on the dash.first time i tried cleanin it there was lint left over everywhere.not only that but u cant get the small holes cleared.i havent cleaned it since.i figures ima just use the armor all wipes.
#5
Re: Cleaning dimpled dashboard (sImPleDc5)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sImPleDc5 »</TD></TR><TR><TD CLASS="quote">I deff agree with the dumb move on the dash.first time i tried cleanin it there was lint left over everywhere.not only that but u cant get the small holes cleared.i havent cleaned it since.i figures ima just use the armor all wipes.</TD></TR></TABLE>
if you want to clean it with a cloth and not get lint, try using a microfiber one. It doesn't leave lint for me.
if you want to clean it with a cloth and not get lint, try using a microfiber one. It doesn't leave lint for me.
#6
Member
Join Date: Jan 2005
Location: Washington, DC, USA
Posts: 1,325
Likes: 0
Received 0 Likes
on
0 Posts
Could also use a California Dash Duster, I'm sure. But yeah, go with a lint-free cloth of any kind, including microfiber. You could probably also roll some tape sticky-side-out over your hand and lift it all off (or a lint roller, too).
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post