can't get the axle back in
#1
Thread Starter
Join Date: Apr 2005
Location: Northglenn, CO, USA
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
can't get the axle back in
I removed the transmission from an EP to do the clutch, and got almost everything put back together except for the driver's side axle. I can't get it in all the way for the life of me, and i'm out of ideas. Suggestions?
#2
Honda-Tech Member
Join Date: Nov 2001
Location: phoenix, az, usa
Posts: 4,364
Likes: 0
Received 0 Likes
on
0 Posts
Turn the axel slowly and push in as you go along.
You may get lucky and it will go in after a few tries or you could be doing this for an hour or so.
I've had both incidents happen to me before.
Patience is the key.
You may get lucky and it will go in after a few tries or you could be doing this for an hour or so.
I've had both incidents happen to me before.
Patience is the key.
#3
Thread Starter
Join Date: Apr 2005
Location: Northglenn, CO, USA
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Re: (f1nal zeros)
I got it eventually. I just wasn't confident enough to shove it in there I guess. I was pushing hard, but I just had to remove it all the way, feel it line up a little, and jam it in.
Thread
Thread Starter
Forum
Replies
Last Post
2000Accord5sp
Honda Accord (1990 - 2002)
11
12-03-2002 05:59 PM