Replacing rubber suspension bushes.
#1
Replacing rubber suspension bushes.
Dear All
I have a Integra Type R. D.C.2, year 1999 and I am about to replace all the suspension bushes with a set of Hardrace.Would any one Know of a detailed post of how it is done and would you need a press and if so what size of press.I have had a look on the forum and F.A.Q. If I have missed it I am sorry, but if I have could somebody tell me how to find it?
Thank you John [Gallagher]
I have a Integra Type R. D.C.2, year 1999 and I am about to replace all the suspension bushes with a set of Hardrace.Would any one Know of a detailed post of how it is done and would you need a press and if so what size of press.I have had a look on the forum and F.A.Q. If I have missed it I am sorry, but if I have could somebody tell me how to find it?
Thank you John [Gallagher]
#2
Honda-Tech Member
Re: Replacing rubber suspension bushes.
You will need at least a basic hydraulic press in addition to a variety of metic bushing press tools. On older cars it is not uncommon to have the outer sleeve frozen to the control arms.
Have fun, good luck.
Have fun, good luck.
Last edited by Ausmith; 11-21-2009 at 12:24 PM. Reason: Fixorz ein typoz
#5
H-T Order of Merit
Re: Replacing rubber suspension bushes.
Can anyone comment on differences between the "hardrace" set of bushings and the Mugen hard bushings sold by King Motorsports? Also, where can you buy the "hardrace" ones?
#6
Honda-Tech Member
Join Date: Oct 2001
Location: VA, USA
Posts: 1,697
Likes: 0
Received 0 Likes
on
0 Posts
Re: Replacing rubber suspension bushes.
I bought my Hardrace bushings on ebay from a seller called "DOHCgarage," if I remember correctly. I don't have any experience with the Mugen bushings.
Thread
Thread Starter
Forum
Replies
Last Post
CRITTERMATT
Honda Civic / Del Sol (1992 - 2000)
16
02-07-2004 08:42 PM
The Internet Tough Guy
Honda Civic / Del Sol (1992 - 2000)
4
10-25-2003 07:47 PM
Jeff_S
Road Racing / Autocross & Time Attack
10
01-15-2002 12:55 PM