jdm_cars

ok, just received back my 70mm ITR TB from MaxBore, which by the way did an AWESOME JOB!!!

Thx Jorge.

Anyway, my question is what is the extra hose on the JDM TB has that the US ones don't have and what does it do, and how to hook it up properly???

I looked at Lucky-R's one the last time, and it didn't have this extra hose.

JDM ****** should know..............

Please tell me what it is for, it is circled in red.

Pic Here:

Haleiwa-Brando

Interesting....Maybe its for the....
Hell I don't know. Just saw where you were from and had to post to get to Hawaii guys one-after-the-other. Good luck.

jdm_cars

hehe...

yeah, seen your posts, nice work with the new mods

Haleiwa-Brando

What kind of car is this going into. I would like to guess an ITR.

jdm_cars

hehe... I wish...

I only got me a GSR, but a jdm ***** one at that ,

anyway, I swapped manifolds, so I purchased this one from HK and sent it to MaxBore to get it done before I put it on my car, and noticed the extra hose.

hopefully someone knows, otherwise I'm just gonna cap it off when I install it.

Haleiwa-Brando

Hmmm. I'll have to take a look at the 97R tomorrow morning and see if it has something scimilar. It looks like some kind of vacuum line....?

jdm_cars

same guess here, but the last time I looked at Lucky-R's one, (I took pictures) it's not there.

wonder why only the JDM Bling one has this and the US one doesnt.

Haleiwa-Brando

If it's relevent to a JDM model only, I would guess that it's some kind of vacuum line running to some sensor for smog check reasons of one or the other.

Considering there is a limit of how many miles a JDM car can clock, maybe this is just relative to that. If it wasn't on your GSR and was not on a Type R, I'd just cap it off and forget about it.

Haleiwa-Brando

Since I'm talking with a fellow guy from the Islands....man I could really go for some Cholo's right about now. I've been dying for one of their burritos....

jdm_cars

I did a search , hehe...
yeah, someone mentioned it was a vaccum line for the Evap.

but I thought for 96+ one end goes to the evap can, and the other goes to the IM manifold? Oh well, I guess JDM Bling for yah....

DanishR

I have the same throttlebody. I didn't hook anything up to that thing you circled in the picture, and no problems...

IN VTEC

iTrader: (3)

That's a port for the EVAP purge. It's designed for the OBD-1 EVAP system.

Just cap it.

BlueTeg

iTrader: (2)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by IN VTEC &raquo;</TD></TR><TR><TD CLASS="quote">That's a port for the EVAP purge. It's designed for the OBD-1 EVAP system.

Just cap it.</TD></TR></TABLE>

That won't pose a problem if you're on OBD1?

IN VTEC

iTrader: (3)

No. That nipple just goes to atmospheric pressure on the front side of the throttle body through a couple of metered holes in the barrel of the throttle body. Cap ****.

1Quikgsr

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by IN VTEC &raquo;</TD></TR><TR><TD CLASS="quote">No. That nipple just goes to atmospheric pressure on the front side of the throttle body through a couple of metered holes in the barrel of the throttle body. Cap ****.</TD></TR></TABLE>