HEADER LENGTH: ctr, vs itr 96 vs itr 98
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2001
Location: out shooting
Posts: 2,800
Likes: 0
Received 0 Likes
on
0 Posts
HEADER LENGTH: ctr, vs itr 96 vs itr 98
hello guys, im about to purchase a header...ive searched and it looks like im going with the apexi gt spec jdm version...here is my dilemma...
they offer a ctr version, 96 itr version, and 98 itr version...they all have the 2.5 collector but the sizes are different, check it.
1996-00 Civic Type R (Japan Spec)
45mm-50.8mm-60.5mm
1994-99 Integra Type R (Japan Spec)
42.7mm-50.8mm-54mm
2000-00 Integra Type R (Japan Spec)
42.7mm-50.8mm-54mm
my question is, should i go with the CTR one b/c it has bigger primaries, AND im also curious if all of these are the same legnth. running this on a b17, so im guessing the ctr would be the best application (luckily it looks to be the biggest).
what do you guys think?
they offer a ctr version, 96 itr version, and 98 itr version...they all have the 2.5 collector but the sizes are different, check it.
1996-00 Civic Type R (Japan Spec)
45mm-50.8mm-60.5mm
1994-99 Integra Type R (Japan Spec)
42.7mm-50.8mm-54mm
2000-00 Integra Type R (Japan Spec)
42.7mm-50.8mm-54mm
my question is, should i go with the CTR one b/c it has bigger primaries, AND im also curious if all of these are the same legnth. running this on a b17, so im guessing the ctr would be the best application (luckily it looks to be the biggest).
what do you guys think?
#6
Honda-Tech Member
Join Date: Nov 2000
Location: Fredericksburg, VA, USA
Posts: 5,135
Likes: 0
Received 0 Likes
on
0 Posts
Re: HEADER LENGTH: ctr, vs itr 96 vs itr 98 (voofee)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by voofee »</TD></TR><TR><TD CLASS="quote">
toda look alike </TD></TR></TABLE>
Toda collector is different.
BTW, It seems that every JDM header (Toda, Spoon, Jun, T1R) use the same 45/50/60 tubing sizes as the CTR.
toda look alike </TD></TR></TABLE>
Toda collector is different.
BTW, It seems that every JDM header (Toda, Spoon, Jun, T1R) use the same 45/50/60 tubing sizes as the CTR.
#7
Re: HEADER LENGTH: ctr, vs itr 96 vs itr 98 (SMSP)
https://honda-tech.com/zerothread?id=551244 I too was leaning towards the '98 Spec header
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Nov 2001
Location: out shooting
Posts: 2,800
Likes: 0
Received 0 Likes
on
0 Posts
here is where i got my information...
http://www.importhorizon.com/apexgtheaders.html
how do you like the apexi? anyone used it--
but im still curius if they are ALL the same length?
also (sorry) when the two secondaries are shorter and hit the one 60mm tube at the end, how does this react in power? i dont have my how to build a honda handbook nearby, and just curious, b/c some other jdm headers have longer secondaries before it hits the final tube..
http://www.importhorizon.com/apexgtheaders.html
how do you like the apexi? anyone used it--
but im still curius if they are ALL the same length?
also (sorry) when the two secondaries are shorter and hit the one 60mm tube at the end, how does this react in power? i dont have my how to build a honda handbook nearby, and just curious, b/c some other jdm headers have longer secondaries before it hits the final tube..
#9
Re: (RedStarGsr)
I heaven't got time to get it install yet , but I will post the review once I done it. At the mean time it is just sitting there colleting dust in my room.
Oh yeah, I have checked it out:
96 spec itr is 42.7-50.8-54
98 spec itr is 45-50.8-60.5 (the one in the pic)
Modified by voofee at 4:18 PM 10/2/2003
Oh yeah, I have checked it out:
96 spec itr is 42.7-50.8-54
98 spec itr is 45-50.8-60.5 (the one in the pic)
Modified by voofee at 4:18 PM 10/2/2003
#10
Thread
Thread Starter
Forum
Replies
Last Post
sir2ef-8
Acura Integra Type-R
13
08-10-2004 09:14 PM