lanceh

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Chris N &raquo;</TD></TR><TR><TD CLASS="quote">

Most (other seats and this one) don't.</TD></TR></TABLE>

i wouldn't agree with that. just about every non reclining sparco and recaro i've seen is FIA cert.

mstewar

there is a fixed back Sparco that is not FIA approved..

and to the guy asking about the expo: there was a big thread about this kind of stuff awhile ago.. if you ask george or trey nicely, they might be able to point you to it faster than I can.. I'll look for it in the morning..

should be fine for most HPDEs though, methinks..

StErN

iTrader: (1)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DsR &raquo;</TD></TR><TR><TD CLASS="quote"> Also, they make great banana chairs for playing GT3 </TD></TR></TABLE>

I can vouch for that.

George Knighton

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DsR &raquo;</TD></TR><TR><TD CLASS="quote">no FIA cert on these..
HPDE's you are goot to go </TD></TR></TABLE>

What group's HPDE are you running in? [...]?

George Knighton

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DsR &raquo;</TD></TR><TR><TD CLASS="quote">...if you have anything over a 32" waist you probobly won't fit .
</TD></TR></TABLE>

Damn. Bunch of shrimps.

No Buddy Club-2 like they have EVO-2 and EVO-3, eh?

JDM CTR '00

iTrader: (2)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by George Knighton &raquo;</TD></TR><TR><TD CLASS="quote">

Damn. Bunch of shrimps.

No Buddy Club-2 like they have EVO-2 and EVO-3, eh?</TD></TR></TABLE>

On the side of the seat where the buddy club sticker is says " Size F ". I wonder if they make it larger. Ima find out...

DsITR

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by George Knighton &raquo;</TD></TR><TR><TD CLASS="quote">

Damn. Bunch of shrimps.

No Buddy Club-2 like they have EVO-2 and EVO-3, eh?</TD></TR></TABLE>

blah.. go put your battery in GK

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by George Knighton &raquo;</TD></TR><TR><TD CLASS="quote">

What group's HPDE are you running in? [...]?</TD></TR></TABLE>

@IVR it's reffered to "touring class." However I might be headed to CO in the next couple weeks for an "actual" track event.

Chris93Si

I'm looking forward to actually seeing those in an R. I keep seeing people buy them but no installs yet. Hurry up and put em in

Edit: How much did the rails set you back?

mstewar

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by George Knighton &raquo;</TD></TR><TR><TD CLASS="quote">

Damn. Bunch of shrimps.

No Buddy Club-2 like they have EVO-2 and EVO-3, eh?</TD></TR></TABLE>

nah.. these are for JDM sized people.. not made for us overweight americans.. yet.. hehe.. with BC starting a US branch, it is a possibility though..

&lt;-- Is down to a 32 waist, and hence considered the BCs..

NSXjr

nice

LFA Squad :: iTO

lets see some install pix already! come on!

bryant

Haha yeah D, where are your pics? If you still dont have rails yet, I have my Mugens up FS

GSRswapandslow.

if they made them larger...i'd pick a setup MAD fast....but, i'm a fat *** american...so i suck at seats

who00knows

I wear a 34...and i fit into them I have to take everything out of my pockets....but i fit. They feel great once you are in them....Ask Yack, Chad, or Doctor Cortez.........They liked my seat......especially for the price i got it for. I picked up one for 325 with the Buddy Club rail.

GSRswapandslow.

well, you're uber smaller than me

but, hey, Eugene and I might be up there this weekend to get the springs from your room mate y0

Chris93Si

DsR: Any pictures of the seats installed????

DsITR

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Chris93Si &raquo;</TD></TR><TR><TD CLASS="quote">DsR: Any pictures of the seats installed????</TD></TR></TABLE>

not yet

here is what I discovered.

Corbeau parts+sparco parts+buddyclub parts= no workie

..I tried using my corbeau mounts/sliders w/my sparco sidemounts to no avail. I even tried a little drilling, no dice.

I have more sparco bits on the way to replace the corbeau bits, so when those are here it should be a breeze...I hope

owen_the_soyboy

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Chris N &raquo;</TD></TR><TR><TD CLASS="quote">

Most (other seats and this one) don't. (have FIA certs)</TD></TR></TABLE> my Sparco Ultra do have FIA certs and they were $600 shipped for the pair, and 12 pounds each!

mstewar

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by owen_the_soyboy &raquo;</TD></TR><TR><TD CLASS="quote"> my Sparco Ultra do have FIA certs and they were $600 shipped for the pair, and 12 pounds each!</TD></TR></TABLE>

not a bad deal at all.. from where?

somehow I overlooked those in my searching.. hmmm....

.RJ

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DsR &raquo;</TD></TR><TR><TD CLASS="quote">..I tried using my corbeau mounts/sliders w/my sparco sidemounts to no avail. I even tried a little drilling, no dice.</TD></TR></TABLE>

From what i've seen, dont the corbeau mount/sliders have a flat plane on them that you could drill through and bolt the sparco sidemount brackets to?

I'd like a set of them, they'd free up some headroom.

RangerHatch

PICS PICS!!! Dying to see to finished product

SoSoJeff

iTrader: (1)

i've sat in em and i think their a bit tight....jdm seats for jdm sized people

Hooch'n

yep......if you are 5'11'' 185 then good luck.......but if you are 5'2'' and 110 then you will love those seats.

uNF$@#!

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by George Knighton &raquo;</TD></TR><TR><TD CLASS="quote">

Damn. Bunch of shrimps.

No Buddy Club-2 like they have EVO-2 and EVO-3, eh?</TD></TR></TABLE>

they have a evo 3? WTF?

im plump and i fit nicely into a EVO...

DsITR

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .RJ &raquo;</TD></TR><TR><TD CLASS="quote">

From what i've seen, dont the corbeau mount/sliders have a flat plane on them that you could drill through and bolt the sparco sidemount brackets to?

I'd like a set of them, they'd free up some headroom.</TD></TR></TABLE>

They sure do, but then the corbeau sliders aren't really flat like the sparco slider, they have a handle that has a twist to it and angles up.. Which doesn't allow for the BC to clear it w/out a bunch of washers.. Which in turn shortens the effective bolt you have left to spin the nut onto.

:whew:

My sparco bits are taking too long so I may have to fab something up on my own.