ARP head studs....
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Posts: 6,543
Likes: 0
Received 0 Likes
on
0 Posts
ARP head studs....
does ARP make these, ive searched and only found the head bolts. i was told if i use head studs then i dont have to relocate my dowel pins on the ls/vtec. can someone confirm this.
thanx
thanx
#3
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Posts: 6,543
Likes: 0
Received 0 Likes
on
0 Posts
Re: ARP head studs.... (sgT)
the dowel pins are necessary to properly located the head.
ARP studs do not do this. They hold the head down to the block.
ARP studs do not do this. They hold the head down to the block.
thanx
#5
Join Date: Apr 2002
Location: NORTHERN California
Posts: 529
Likes: 0
Received 0 Likes
on
0 Posts
Re: ARP head studs.... (sgT)
Forget
ARP head studs get AEBS head studs there way thicker and dont stretch also I think ARP makes them for AEBS anyways go check them out they also have a little piece at the bottom to help friction with torquing them down so they fill up the entire area
ARP head studs get AEBS head studs there way thicker and dont stretch also I think ARP makes them for AEBS anyways go check them out they also have a little piece at the bottom to help friction with torquing them down so they fill up the entire area
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
civcexcoupeblack
Honda Civic / Del Sol (1992 - 2000)
2
03-23-2003 01:22 PM