greyEG

Got the trans out, but not after rusted bolts and broken pry bars lol.

My trans is out. So i was spinning the input shaft and i hear a clicking noise, is that the ISB or is this normal?

And i see some red dust? Is that from the clutch..? That normal or bad also?

B_Swapped93

the dust is fine I had lost when i pulled mine for the first time, as for the clicking can't recall if mine did that when I spun it.

greyEG

Thanks

Any more?

bump1

crazyhouse2011

Bro. IF you have your transmission out you might as well spend the money for the ISB while your in there. Like 20-60 bucks depending on your car. Just do it, piece of mind.

TheRealTegger

Is this when the transmission is in neutral? In neutral there ought not to be any clicking. Check to make sure the diff isn't turning when you spin the input shaft.

Red dust is OK. But...are the input shaft splines rusty?

TheRealTegger

Sure, but that means splitting the case and taking everything apart in order to replace the input-shaft bearing. That $20-$60 isn't worth the hassle of disassembly if you don't need to do it.

B serious

iTrader: (1)

OP...the clicking is probably happening because the trans is either in gear or kind of engaging a gear.

Or you're grabbing the input shaft and turning it back and forth quickly. That shaft is loaded with gears and bearings and other doo-dads that click together as you change direction with the input shaft. Normal.

Schister66

OP: better hope your doo-dad(s) didn't wear out...those are hard to find in the parts catalog