throw out bearing
03-15-2007, 12:15 PM
#1
Thread Starter
Join Date: Feb 2007
Location: city of hoez, CA
Posts: 357
Likes: 0
Received 0 Likes
on
0 Posts
throw out bearing
was i supposed to lube my throw out bearing? because i just installed a new clutch and i forgot to lube the throw out bearing and now when i let go of the clutch sometimes it makes a tiny squeaky sound. Whats the worse that could happen??? 
03-15-2007, 03:18 PM
#3
Honda-Tech Member
Join Date: Jul 2004
Location: 239
Posts: 614
Likes: 0
Received 0 Likes
on
0 Posts
Re: throw out bearing (b18c eJ1)
pre-mature wear on the bearing, possibly stick during shifts...
but chances are you'll burn out the clutch before the bearing becomes a problem..
did you use an oem metal bearing or the plastic style that comes with after market clutches???
but chances are you'll burn out the clutch before the bearing becomes a problem..
did you use an oem metal bearing or the plastic style that comes with after market clutches???
03-15-2007, 06:08 PM
#4
Thread Starter
Join Date: Feb 2007
Location: city of hoez, CA
Posts: 357
Likes: 0
Received 0 Likes
on
0 Posts
Re: throw out bearing (sidesi)
well i have mild built gsr engine in my civic swapped and i used a act 4 puck so i assume the throw out bearing was plastic, im not too sure.
03-16-2007, 03:21 PM
#5
Honda-Tech Member
Join Date: Jul 2004
Location: 239
Posts: 614
Likes: 0
Received 0 Likes
on
0 Posts
Re: throw out bearing (b18c eJ1)
did you replace the bearing with an oem, did you install the ACT bearing, or did you reuse the bearing that was in there with the old clutch?
03-16-2007, 03:41 PM
#6
Thread Starter
Join Date: Feb 2007
Location: city of hoez, CA
Posts: 357
Likes: 0
Received 0 Likes
on
0 Posts
Re: throw out bearing (sidesi)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sidesi »</TD></TR><TR><TD CLASS="quote">did you replace the bearing with an oem, did you install the ACT bearing, or did you reuse the bearing that was in there with the old clutch?</TD></TR></TABLE>
i used the ACT bearing.
i used the ACT bearing.
Trending Topics
03-17-2007, 12:25 AM
#8
It's always ideal to put a little grease on any TOB before they go in, but every bearing i've ever had OEM and other throw out bearings are sealed units.. I'd reccomend using OEM nachi b/c any time i haven't i've had problems with them being noisy. (for example the one that came with my XTD clutch kit)
Thread
Thread Starter
Forum
Replies
Last Post
crxpwr1
Honda CRX / EF Civic (1988 - 1991)
11
10-02-2006 03:45 AM
litterbox
Honda Civic / Del Sol (1992 - 2000)
14
07-20-2005 11:33 AM
