johnkilo3

iTrader: (2)

As you can see in this picture (excuse the dirty car, there's a lot of pollen in the air here) the plastic molding on my Integra is damaged. It is damaged on both sides of the car. I would like to replace it eventually, but I have some questions before spending money on it.

1. I'm assuming the part numbers are 72410-ST7-003 and 72450-ST7-003 (MOLDING ASSY., L/R. FR. DOOR), correct?

2. Do these parts come with the black plastic that is on top of the steel piece, or is it just the steel piece?

3. If it is just the steel piece, how do you put the black plastic over it again? Where do you get it?

Thanks.

fcm

Would help if we have MM&Y of car and trim level. 94

fcm

Also, have you checked the local bone yards? 94

jfral087

I got all that stuff at a pick and pull for $3.00. Good stuff to! You could also use a razor blade and cut all the rubber plastic stuff off and paint them. Good cheap fixes.

johnkilo3

iTrader: (2)

Sorry about that, it's a 99 3 door GSR. I really don't want to just tear it off and paint it. I'd like to keep it as OEM as possible. Unfortunately there are few pick and pull junkyards in my area, and what is usually there is garbage/destroyed.

B20ztek

iTrader: (1)

Could use plasti-dip on the metal if you decided to strip it, it would look oem.

johnkilo3

iTrader: (2)

Any other thoughts?

fcm

If you want I can check at the PicknPull here in Kelowna, I am pretty sure the 94 Integra here has good doors and it is a black one.

It can't cost much to ship them to Connecticut. 94

johnkilo3

iTrader: (2)

Can you PM me a price? That's nice of you to offer.

1cleanDA

I have a 93 DA Integra. I replaced both of those trim pieces on it when I repainted it, bought them new from a dealer online.