problem with Skunk 2 IM on a gsr
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2005
Posts: 613
Likes: 0
Received 0 Likes
on
0 Posts
problem with Skunk 2 IM on a gsr
I read the write ups on this setup and not sure why its not working.
to get a skunk2 IM to work on a gsr youre suppose to get the ITR throttle cable and bracket and non gsr TB pulley
I had maxbore modify my stock TB pulley so that it should work with this setup but my throttle cable is too tight and opens the throttle plate making my car rev at 5,000 rpm. Thats with the throttle cable all the way loose?
anyone else run into this problem?
im using my stock gsr tb but i had my tb pulley modded to work with the skunk2 setup but the cable is too tight causing high rpm at idle
so now i have to buy another TB pulley.
what car models can i get them from? anyone have one
Modified by racekar711 at 11:23 PM 12/2/2005
Modified by racekar711 at 12:27 PM 12/3/2005
to get a skunk2 IM to work on a gsr youre suppose to get the ITR throttle cable and bracket and non gsr TB pulley
I had maxbore modify my stock TB pulley so that it should work with this setup but my throttle cable is too tight and opens the throttle plate making my car rev at 5,000 rpm. Thats with the throttle cable all the way loose?
anyone else run into this problem?
im using my stock gsr tb but i had my tb pulley modded to work with the skunk2 setup but the cable is too tight causing high rpm at idle
so now i have to buy another TB pulley.
what car models can i get them from? anyone have one
Modified by racekar711 at 11:23 PM 12/2/2005
Modified by racekar711 at 12:27 PM 12/3/2005
#2
Re: problem with Skunk 2 IM on a gsr (racekar711)
u can actually use gsr throttle body.. i used it and it was fine.. but only get that mannifold if u gonna get bigger cams and chipped ecu other wise ur gonna lose power
#6
Honda-Tech Member
Join Date: Nov 2001
Location: Coming to a parking lot, near you
Posts: 4,540
Likes: 0
Received 0 Likes
on
0 Posts
Re: (racekar711)
If you are seriouslly looking for the right answer, you need to post a pic. From what you are saying, you need to get a throttle cable from an ITR, maybe one from a GS would work.
Post a pic.
Post a pic.
#7
Re: problem with Skunk 2 IM on a gsr (racekar711)
On the HOW TO INSTALL BLOX IM by Honda Hick (I think) he said to use a tb pulley off the ls.
I heard that the stock tb and cable will work just that it wont be as clean and you probably have to jerry rig it.
I heard that the stock tb and cable will work just that it wont be as clean and you probably have to jerry rig it.
Thread
Thread Starter
Forum
Replies
Last Post