OBD2 to 1 conversion TDC Code???!! need answeres ASAP!
#1
Honda-Tech Member
Thread Starter
OBD2 to 1 conversion TDC Code???!! need answeres ASAP!
obd2 ls/vtec integra converted to obd1 on a chipped p28 throws TDC code and runs like ***
put back to stock ecu runs fine.
any ideas. Ive checked, double checked wiring of the conversion harness and the timing. AND used to different chipped ecus both from running customer cars.
let me know
thanks
put back to stock ecu runs fine.
any ideas. Ive checked, double checked wiring of the conversion harness and the timing. AND used to different chipped ecus both from running customer cars.
let me know
thanks
#2
Junior Member
Join Date: Oct 2003
Location: Oviedo, FL, USA
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Re: OBD2 to 1 conversion TDC Code???!! need answeres ASAP! (GenIIIMrDuece)
That'sa due to the crank angle sensor. On OBD2 cars, it's down by the crank pulley. On OBD1 car's, it's in the dizzy.
#3
Honda-Tech Member
Thread Starter
Re: OBD2 to 1 conversion TDC Code???!! need answeres ASAP! (lugnutRS)
sooo.... since it is an ob1 ecu and obd2/obd1 dist are the same... shouldnt it not matter? at least the jumper harness has it going nowhere
Thread
Thread Starter
Forum
Replies
Last Post
sikcrx80
Tech / Misc
27
05-01-2023 05:16 PM
stevieteg
All Motor / Naturally Aspirated
3
05-17-2004 11:35 AM