Need help on how to install HID into 92 DA
01-19-2005, 11:14 AM
#1
Thread Starter
Join Date: Dec 2004
Location: Somewhere out there, USA
Posts: 283
Likes: 0
Received 0 Likes
on
0 Posts
Need help on how to install HID into 92 DA
I have a Audi Projector and a ballast w/D2s bulbs.
Need instructions on how to retrofit the projectors and how to install ballast.
Need instructions on how to retrofit the projectors and how to install ballast.
01-26-2005, 12:45 PM
#5
Junior Member
Join Date: Mar 2002
Location: Texas, USA
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need help on how to install HID into 92 DA (peel17)
have you checked g2ic.com?
i am looking to do the same on my DA but not audi projectors i think something else, not sure though
i am looking to do the same on my DA but not audi projectors i think something else, not sure though
01-26-2005, 01:24 PM
#7
Honda-Tech Member
Join Date: Apr 2003
Location: OC, CA, USA
Posts: 2,220
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
01-26-2005, 02:30 PM
#8
Honda-Tech Member
Join Date: Jun 2004
Location: Phoenix, AZ, Maricopa
Posts: 1,100
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need help on how to install HID into 92 DA (ambiguousasn)
Does the DA headlights come with halogen projectors? if they do just follow the skafia article...
01-26-2005, 08:52 PM
#10
Senior Member
One thing that is often over looked is a wiring harness.
Stock honda wiring is only good for 10 amps MAX!
HID's can draw almost double that during warm up which will fry your stock wiring fast.
I would recomend making or buying a wiring harness.
I make them in my spare time. i have a FS thread in my signature. if you search topics that i made i did a write up on how to make a wiring harness.
Stock honda wiring is only good for 10 amps MAX!
HID's can draw almost double that during warm up which will fry your stock wiring fast.
I would recomend making or buying a wiring harness.
I make them in my spare time. i have a FS thread in my signature. if you search topics that i made i did a write up on how to make a wiring harness.
01-26-2005, 10:01 PM
#11
Honda-Tech Member
Join Date: Aug 2001
Location: WI
Posts: 2,242
Likes: 0
Received 0 Likes
on
0 Posts
I agree a wiring harness is a must dont run current through stringy oem wires.
try searching for memeber cjls he has done the retrofit with i believe hella bixenons
try searching for memeber cjls he has done the retrofit with i believe hella bixenons
01-26-2005, 10:07 PM
#12
Honda-Tech Member
Join Date: Oct 2002
Location: deeefuu, tejas
Posts: 1,584
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need help on how to install HID into 92 DA (peel17)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by peel17 »</TD></TR><TR><TD CLASS="quote">kool thanks..
But I need a How to on a DA stock headlight</TD></TR></TABLE>
the thing is there is no one specific way of doing this.....every way is gonna be different. check my username on g2ic i think the post is still there from when i did mine.......that might help.
edit....did you say stock da headlamp? remember thats glass lens and metal housing, that one is gonna be a tad bit harder than the plastic type jdm one pieces. took me about 35minutes just to pry apart the glass lens versus about 10 minutes with the jdm one pieces.....anyhoo let me know if u have any ?'s...
Modified by Cjsls at 1:18 AM 1/27/2005
But I need a How to on a DA stock headlight</TD></TR></TABLE>
the thing is there is no one specific way of doing this.....every way is gonna be different. check my username on g2ic i think the post is still there from when i did mine.......that might help.
edit....did you say stock da headlamp? remember thats glass lens and metal housing, that one is gonna be a tad bit harder than the plastic type jdm one pieces. took me about 35minutes just to pry apart the glass lens versus about 10 minutes with the jdm one pieces.....anyhoo let me know if u have any ?'s...
Modified by Cjsls at 1:18 AM 1/27/2005
01-27-2005, 07:13 AM
#13
Thread Starter
Join Date: Dec 2004
Location: Somewhere out there, USA
Posts: 283
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need help on how to install HID into 92 DA (Cjsls)
okay, well.. that will be on hold for awhile until i figure something out.
So for now.. since i have a ballast and a D2s bulb in hand.. does anyone know how to make this work into a Stock DA?
So for now.. since i have a ballast and a D2s bulb in hand.. does anyone know how to make this work into a Stock DA?
Thread
Thread Starter
Forum
Replies
Last Post
