need any info
11-18-2011, 06:11 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2011
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
need any info
Had a cel light on...was throwing o2 sensor heater code so I replaced my primary o2 sensor now have an issue with my car bogging at low rpm only in first and second...under harder acceleration there is no bog...if I unplug my o2 sensor the cel comes back on and it runs fine...I know the primary o2 runs in closed loop so its prob the o2 causing the prob ...but I'm a lil confused as to why this is happening...anyone have any info
11-18-2011, 06:36 PM
#3
Honda-Tech Member
Thread Starter
Join Date: Nov 2011
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Re: need any info
I cleared all codes...reset the Ecu..its so strange...I've done b swaps in my civics obd2 to obd1 conversions but never.ran into something so obsurd...all codes cleared no cel and it bogs...unplug the o2...cel comes back on and it runs fine...can't figure.this out for the life of me
Thread
Thread Starter
Forum
Replies
Last Post
DumpedSi
Honda Civic / Del Sol (1992 - 2000)
9
08-20-2003 07:06 AM