maintainance required light flashing
#1
Thread Starter
Join Date: Mar 2004
Location: brockville, ont, canada
Posts: 455
Likes: 0
Received 0 Likes
on
0 Posts
maintainance required light flashing
whenever i start my teg, the maint. req'd light comes on and flashes exactly 10 times.
what exactly does this mean? does it come on at a certin milage?
it's not throwing any CEL codes
what exactly does this mean? does it come on at a certin milage?
it's not throwing any CEL codes
#2
Honda-Tech Member
Re: maintainance required light flashing (hott-nix)
it means you are coming up on a scheduled maintenence. How many miles are on the car?
It doesn't mean there is something wrong with the car.
It doesn't mean there is something wrong with the car.
#3
Re: maintainance required light flashing (hott-nix)
it's telling you it is ready for your regularly scheduled maintenance. if you don't care about taking it to the dealer and you wanna perform this yourself, just look for the small square button under your dash, kinda by the sterring wheel, turn the key on w/ out starting the car, and hold the button til it comes on then goes off. problem solved.
#4
Thread Starter
Join Date: Mar 2004
Location: brockville, ont, canada
Posts: 455
Likes: 0
Received 0 Likes
on
0 Posts
Re: maintainance required light flashing (ScreaminTeg)
the car has just a hair over 145,000 km's
it completly slipped my mind about the maintainance reminder
i feel about 10 iq points dumber right now
it completly slipped my mind about the maintainance reminder
i feel about 10 iq points dumber right now
#7
Junior Member
Join Date: Sep 2003
Location: Ohhhhhh yeaaaa, NY, USA
Posts: 828
Likes: 0
Received 0 Likes
on
0 Posts
Re: maintainance required light flashing (hott-nix)
mines been going on for months. Everyone told me to put the key in 2 clicks then hold down the button. It doesn't work for me
Trending Topics
#8
Re: maintainance required light flashing (Integra4lyfe)
You have to push the button in while it is still flashing. Hold the button in for at least 10 seconds. You actually can do this even with the car running. The key is that the light has to be either blinking or on for you to clear it.
BTW- You should be able to find a little black box with a little blue or red button. It is under the dash kinda near your right knee. (It's up and behind the dash, it shouldn't be too hard to find...)
BTW- You should be able to find a little black box with a little blue or red button. It is under the dash kinda near your right knee. (It's up and behind the dash, it shouldn't be too hard to find...)
#9
Will you make something up for me please?
Join Date: Sep 2001
Location: SoCal
Posts: 6,155
Likes: 0
Received 0 Likes
on
0 Posts
Re: maintainance required light flashing (Integra4lyfe)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Integra4lyfe »</TD></TR><TR><TD CLASS="quote">mines been going on for months. Everyone told me to put the key in 2 clicks then hold down the button. It doesn't work for me </TD></TR></TABLE>
Months? After a while, the lights stays on constant.
The key doesn't have to be on 2 clicks, the car can be on. Just hold it down until the light goes away.
Months? After a while, the lights stays on constant.
The key doesn't have to be on 2 clicks, the car can be on. Just hold it down until the light goes away.
Thread
Thread Starter
Forum
Replies
Last Post
gsr.sedan
Acura Integra
6
01-03-2003 05:39 PM