low beam to high beam conversion
#1
Thread Starter
Join Date: Feb 2006
Location: asdf, asdf, asdf
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
low beam to high beam conversion
I read an article in team integra. There one article it show how to do a 9005 high beam bulb to a 9006 low beam bulb..I wonder has anyone experiences this before. Is it good idea to do it. Because it seem that the high beam put out more light I'm afraid it might burn some wire and other parts.
I know this is a dumb question is there by any chance you can find parts for a 94' integra or higher at the Car Junk yard.
I know this is a dumb question is there by any chance you can find parts for a 94' integra or higher at the Car Junk yard.
#2
https://honda-tech.com/zerothread?id=1071864
https://honda-tech.com/zerothread?id=201215
i did the 'conversion' and have had zero problems and it has been just about a year.
i say go for it.
https://honda-tech.com/zerothread?id=201215
i did the 'conversion' and have had zero problems and it has been just about a year.
i say go for it.
Thread
Thread Starter
Forum
Replies
Last Post