how to fix Ignition switch on 95 integra
#1
Honda-Tech Member
Thread Starter
Join Date: May 2009
Location: 760 HI DES
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
how to fix Ignition switch on 95 integra
need help on fixing 95 integra ignition switch car was stolen i got it back now i have to repair the box and tumble
will strat up just need to know what to replace
will strat up just need to know what to replace
#2
Re: how to fix Ignition switch on 95 integra
I had to fix the ignition switch on my 92, I'm 16 and I did it just fine, buy a haynes manual and it basically tells you all you need to know about it.
#3
Re: how to fix Ignition switch on 95 integra
you can weld the ignition back together but it's aluminum, so you have to find somebody that knows what they're doing. otherwise, just look at it, see what's broken, and replace it. it's really that simple.
#4
Honda-Tech Member
Thread Starter
Join Date: May 2009
Location: 760 HI DES
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Re: how to fix Ignition switch on 95 integra
its the tumble that i have to fix does any one know how to take of the bolts that lock in the tumble
#6
Honda-Tech Member
Join Date: Mar 2004
Location: Sunny SoCal
Posts: 1,290
Likes: 0
Received 0 Likes
on
0 Posts
Re: how to fix Ignition switch on 95 integra
I'm assuming you're referring to the bolts that hold the tumbler on the steering column? The ones that have no hex or slots to apply a tool?
Use a sharp punch and hammer and lightly hit the bolts off center so they turn in a clockwise direction. Once you get them loose you can remove them by hand.
Tighten the new bolts until the heads twist off. If you're inclined, before you install the new lock you can send it out to a locksmith and they can re-key it to match your old key.
GL
Use a sharp punch and hammer and lightly hit the bolts off center so they turn in a clockwise direction. Once you get them loose you can remove them by hand.
Tighten the new bolts until the heads twist off. If you're inclined, before you install the new lock you can send it out to a locksmith and they can re-key it to match your old key.
GL
#7
Honda-Tech Member
Thread Starter
Join Date: May 2009
Location: 760 HI DES
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Re: how to fix Ignition switch on 95 integra
thanx that what i was asking about the re-key just take the tumble to the locksmith and they fit it to my old key cool thats what i'll do
Trending Topics
#8
Honda-Tech Member
Re: how to fix Ignition switch on 95 integra
Use a dremel and cut a groove that you can turn with a screwdriver. Luckily they aren't in there very tight.
I've heard that some have a shape cut into them and then filled with solder. So you could desolder them if that's the case.
I've heard that some have a shape cut into them and then filled with solder. So you could desolder them if that's the case.
#9
#11
Honda-Tech Member
#12
Honda-Tech Member
Join Date: May 2013
Location: NorCal
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
wuhungsixxx
Honda CRX / EF Civic (1988 - 1991)
1
04-10-2002 08:21 PM