flatline

Help everyone, my car shakes when i press on the gas, but only when im on the gas.

I can feel the stick shift shake also as well as the steering wheel. as i press on the gas it only gets worse.

it is coming from the front end, i am thinking it is a motor mount or something like that.

The motor was just replaced and i cant figure this little bugger out. please let me know any info. thanks in advNCE

96 Ls lnTeG

check your mounts make sure there all tite

flatline

great idea, i will get back to you on what happened!!!! thanks!!!!!

any other suggestions

blackeg

happened to both my cars.
- my honda shook real bad under acceleration, turns out that my inner cv joint was way beyond broken. thats what happens when your balljoint breaks and your control arm hits the ground
- my protege is doing it now, but im pretty sure its because i have a clump of frozen fix a flat in the front tire .
get under the car and check to make sure everything is tight...axles,sway bar..even check the lug nuts...

AspectIndustries

Weird, on my trip back from California. (1100 mile drive) Non - Stop.. I felt a shaking on 5th Gear. Going from 80-90 mph. But when i let go of the gas, it stops. When i pushes it in. It shakes again? but.. whats weird, is when i throw it back in 4th gear, going around 80-90MPH.. It runs fine? (Lately my CV boot, tore also..) But can this really be the problem?

sinfulDB1

iTrader: (1)

mine always shook under acceleration... got my axle replaced and it doesnt do it anymore.. i did have a f'd up inner cv joint..

TURBO4drTypeR

YUP!!! Its your AXLE!!! These guys are telling you the EXACT problem you are having... Change your axle, it will solve your shaking...

GoodLuck!

IntEGNYC

could be your timing is off.

did you just say you just acquired this engine? hmm

Jay J

Could it be sparkplugs, wires, destributor?

.RJ

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by neuspeed &raquo;</TD></TR><TR><TD CLASS="quote">Could it be sparkplugs, wires, destributor?</TD></TR></TABLE>

no! no! no!

If you dont know, dont post.

Its one of your Inner CV's. 100%. Get under the car and check them out - one of them will have a *slight* amount of play in it.

flatline

thanks everyone for your great ideas, i just got back from a snowboarding trip, im going to jack up the car and check everything out. thanks again.

Mr. Softee

does it shake like a salt shaker?

Tony R

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 94goldjungsr &raquo;</TD></TR><TR><TD CLASS="quote">does it shake like a salt shaker?</TD></TR></TABLE>

Dude come on

Mr. Softee

i kiid :hs:

Mr. Softee

honestly it sounds like a motor mount, check to make sure they are all connected and all have the bolts in.

Tony R

.RJ

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 94goldjungsr &raquo;</TD></TR><TR><TD CLASS="quote">honestly it sounds like a motor mount, check to make sure they are all connected and all have the bolts in.</TD></TR></TABLE>

Not likely.

In case you were wondering, i had the same problem. Thread here:

https://honda-tech.com/zerothread?id=664016

Mr. Softee

it is likely, a motor mount could easily cause that problem.

96 Ls lnTeG

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 94goldjungsr &raquo;</TD></TR><TR><TD CLASS="quote">it is likely, a motor mount could easily cause that problem.</TD></TR></TABLE>

That what happen to a buddy of mine It was one if his driver side tanny mount olts were screwed

Chrisv006

Its your CV AXLE!!!! Listen to everyone!

This exact same senario has happened to the last 7 Honda's Ive owned...costs me exactly $249 and change to replace the Axles/boots....(I think a dealer is something totally obsecene like $800).....

Look at it, for most of mine...it squirted oil out onto the wheels/car....

-Chris

luvinmyGSR

my friend had the same problem in his car and he replaced the cv joint and its fine now

flatline

i was missing a transmission bolt to the mount and that bushing is torn, i am going to replace those then see what happens, i might have to replace the axle. thanks again!!!!!!!!

96AllMotorDC2

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .RJ &raquo;</TD></TR><TR><TD CLASS="quote">
Its one of your Inner CV's. 100%. Get under the car and check them out - one of them will have a *slight* amount of play in it.</TD></TR></TABLE>

actually i had this same problem. i replaced both axles with brand new ones and still have the problem. check all motor mounts. not that either. balanced tires. still didnt help. ive never found a fix to the problem, just learned to live with it. so i wouldnt say its <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .RJ &raquo;</TD></TR><TR><TD CLASS="quote">Its one of your Inner CV's. 100%.</TD></TR></TABLE>.
good luck finding your problem

Chris

Axles (CV joints)

AspectIndustries

&gt;_&lt; I had this problem. Was little shakey. Now its Clinking! cLonk cLonk Noise, from the CV Joint, which you can hear really lOud. Is it bad if i drive it like this? Or should i replace soon. (Since im sure ill be lazy to work on the car) Not till it warms up a little. ^_~