Dropping a B18B1 into GSR Shell
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2004
Location: Winnipeg, MB, Canada
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Dropping a B18B1 into GSR Shell
I have a 96 Gsr Shell complete with everything, just a blown bottom end, im trying to put a 95 LS Engine in it, Im doing this for a daily driver, no LS/vtec, all the engine is, just the motor, intake manifold/ fuel injectors and fuel rail and nothing else, no starter/dizzy/alternator. If i want it to convert it to obd2, all i would need is a different dizzy than the GSR, a p75 ecu, and maybe the intake manifold?
If i were to convert it to obd1, i would need to find a dizzy, jumper harness, obd1 ecu, and the alternator.
Another question is since the plugs on the integras are backwards compatible, would i be able to use a obd2 alternator on an obd1?
If i were to convert it to obd1, i would need to find a dizzy, jumper harness, obd1 ecu, and the alternator.
Another question is since the plugs on the integras are backwards compatible, would i be able to use a obd2 alternator on an obd1?
Thread
Thread Starter
Forum
Replies
Last Post