Does Greddy SP exhaust 60mm = 2.25 or 2.5 inches??
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2003
Location: NOR, CAL, 209
Posts: 816
Likes: 0
Received 0 Likes
on
0 Posts
Does Greddy SP exhaust 60mm = 2.25 or 2.5 inches??
Is it closer to 2.25in or 2.5 in? I did the calculation and it seems to be like 2.38~. Went turbo and need a bigger exhaust
#3
Member
Join Date: Jan 2003
Location: Rowland Heights, CA
Posts: 1,191
Likes: 0
Received 0 Likes
on
0 Posts
Re: Does Greddy SP exhaust 60mm = 2.25 or 2.5 inches?? (romeo619romeo)
2.36in or 60mm
here are some "turbo" exhaust:
HyTech 2.5 63.5 Twin-pass
SMSP 2.5 63.5 Straight-through
Type One Racing (T1R) 2.5 63.5 Straight-through
Kakimoto R 2.76 70 Straight-through
Thermal R&D Turbo
thanks to TI
here are some "turbo" exhaust:
HyTech 2.5 63.5 Twin-pass
SMSP 2.5 63.5 Straight-through
Type One Racing (T1R) 2.5 63.5 Straight-through
Kakimoto R 2.76 70 Straight-through
Thermal R&D Turbo
thanks to TI
#4
Honda-Tech Member
iTrader: (1)
Join Date: Jan 2002
Location: Nowhere and Everywhere
Posts: 29,530
Likes: 0
Received 53 Likes
on
47 Posts
Re: Does Greddy SP exhaust 60mm = 2.25 or 2.5 inches?? (arsenaldragster)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by arsenaldragster »</TD></TR><TR><TD CLASS="quote">Is it closer to 2.25in or 2.5 in? I did the calculation and it seems to be like 2.38~. Went turbo and need a bigger exhaust </TD></TR></TABLE>
uhhh I don't get it, the answer to your question is right there... actually 2.38 is smack in the middle between 2.25 and 2.50, which would make it about 2-3/8".
uhhh I don't get it, the answer to your question is right there... actually 2.38 is smack in the middle between 2.25 and 2.50, which would make it about 2-3/8".
#5
Member
Join Date: Jan 2003
Location: Rowland Heights, CA
Posts: 1,191
Likes: 0
Received 0 Likes
on
0 Posts
Re: Does Greddy SP exhaust 60mm = 2.25 or 2.5 inches?? (PatrickGSR94)
integra exhaust size usually comes in one of the following measurement
1.91in is 48.6mm
2.0in is 50.8mm
2.17in is 55 mm
2.25in is 57.2mm
2.36in is 60mm
2.38in is 60.5mm
2.5in is 63.5mm
2.76in is 70mm
3.0in is 76.2mm
1.91in is 48.6mm
2.0in is 50.8mm
2.17in is 55 mm
2.25in is 57.2mm
2.36in is 60mm
2.38in is 60.5mm
2.5in is 63.5mm
2.76in is 70mm
3.0in is 76.2mm
Trending Topics
#8
Re: Does Greddy SP exhaust 60mm = 2.25 or 2.5 inches?? (arsenaldragster)
60mm will do if your not pushing alot of WHP. or custom 2.5" from KTeller. 70mm EVO's are available I believe. reducing backpressure will probably help spool the turbo better...but not significantly enough to deal with the added noise. Yeah, the turbo itself will muffle some sound...but not enough.....try the FI forum...some swear by 3"
#9
Honda-Tech Member
Join Date: Jul 2003
Location: West Des Moines 50266, Iowa, USA
Posts: 1,634
Likes: 0
Received 0 Likes
on
0 Posts
Re: Does Greddy SP exhaust 60mm = 2.25 or 2.5 inches?? (mamaboy)
Anyone using the greddy SP and can provide advice on whether to buy this or go with the Greddy Evo. yes, the evo go from 60-70mm, but I am curious if this exhaust flows well and is recommended over the tanabe hyper medallion or Apexi WS...
#13
Honda-Tech Member
Join Date: Jul 2003
Location: West Des Moines 50266, Iowa, USA
Posts: 1,634
Likes: 0
Received 0 Likes
on
0 Posts
Re: (SiB16a)
Yes, but does the muffler rob lots of power or is it still advisable ? Thats what I am going after, finding the best solution (middle ground for sound and power) is what I am going for. Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
Derek14
Forced Induction
5
03-23-2004 09:10 AM