BUILDING B17 MOTOR
01-22-2010, 08:10 AM
#1
Junior Member
Thread Starter
Join Date: Nov 2007
Location: WOODBRIDGE, va, usa
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
BUILDING B17 MOTOR
I HAVE A 92 INTEGRA GSR WITH ORINGINAL MOTOR IN IT. IT SMOKES AND BURNS OIL. SO I WAS THINKING OF REBUILDING MY MOTOR. THE ONLY PROBLEM IS THAT THIS IS MY DAILY DRIVER. SHOULD I DO THE BLOCK OR HEAD FIRST. DONT HAVE THE MONEY TO DO BOTH AT THE SAME TIME. ANY HELP
01-22-2010, 08:54 AM
#2
Honda-Tech Member
Join Date: Nov 2007
Location: Stockton, Ca, USA
Posts: 477
Likes: 0
Received 0 Likes
on
0 Posts
Re: BUILDING B17 MOTOR
you may be better off swapping something else in there temporarily until you have the scratch to rebuild it.. if it smokes and burns oil, you probably have bad valve seals or burned/broken piston rings...
500 bucks on craigslist could probably get you a b16 to bolt in, then just drive that while rebuilding your engine? idunno.. rebuilding engines is costly, and i doubt you will find a replacement b17
500 bucks on craigslist could probably get you a b16 to bolt in, then just drive that while rebuilding your engine? idunno.. rebuilding engines is costly, and i doubt you will find a replacement b17
Thread
Thread Starter
Forum
Replies
Last Post
smokinloc
Honda Civic / Del Sol (1992 - 2000)
5
06-25-2010 08:03 AM
