Alignment off after new wheel bearings. Stumped.
#1
Honda-Tech Member
Thread Starter
Alignment off after new wheel bearings. Stumped.
Hey guys. I'm a little stumped on this one. So I had an extra set of front knuckles, I ordered new wheel bearings and got them pressed in by a reputable shop. After swapping out the old knuckles with bad wheel bearings, now my front wheels have excessive toe. I can visually see that the wheels aren't steering straight when the steering wheel is straight and the car pulls to the right. Now I'm pretty sure changing the wheel bearings or the knuckles for that matter should change the toe/alignment, so any have any ideas? The only 1 I have is that maybe driving on bad bearings for a while changed the toe adjusment. Any help would be nice
#4
Re: Alignment off after new wheel bearings. Stumped.
Haha ya, when I read the thread I thought, 'did he take it in for an alignment?"
When you mess with anything up front, it can throw off the alignment. Get the lifetime one.
When you mess with anything up front, it can throw off the alignment. Get the lifetime one.
#5
Honda-Tech Member
Thread Starter
Re: Alignment off after new wheel bearings. Stumped.
Haha. Alright, thanks guys. I just didn't think that the front knuckles would change the alignment. I suppose I should though, because I can see slight toe in the front wheels and the steering wheel is now a little off centered to get it to steer straight.
Thread
Thread Starter
Forum
Replies
Last Post