99 gsr jsut put in jdm 4-1 type r headers in what kind of test pipe do I use?????
#1
* B A N N E D *
Thread Starter
Join Date: May 2004
Location: SAN DIEGO CLAIREMONT, CA, 92117
Posts: 33,383
Likes: 0
Received 0 Likes
on
0 Posts
99 gsr jsut put in jdm 4-1 type r headers in what kind of test pipe do I use?????
99 gsr jsut put in jdm 4-1 type r headers in what kind of test pipe do I use?????
99 gsr with jdm 4-1 headers and i got usdm type r b pipe and axle back
where can i get a test pipe that will work with this setup
i dont wanna drive around straight from header , can anyone help or had this same situation
99 gsr with jdm 4-1 headers and i got usdm type r b pipe and axle back
where can i get a test pipe that will work with this setup
i dont wanna drive around straight from header , can anyone help or had this same situation
#2
Join Date: Dec 2003
Location: St. Louis, MO USNA C/O 2008, usa
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
Re: 99 gsr jsut put in jdm 4-1 type r headers in what kind of test pipe do I use????? (TYPERman2001)
try meineke or carx. a straight(test) pipe is just a peice of piping connecting your header collector and your exhaust. youll need a custom one installed at a muffler shop
#3
Re: 99 gsr jsut put in jdm 4-1 type r headers in what kind of test pipe do I use????? (TYPERman2001)
just like he said, a strait pipe. Cost like 30 bucks around my way. You kinda of got get the shop hustled. Most of the time they can make it but won't install, unless you give dude a nice tip.
#6
Darth ModerVader
Re: (TYPERman2001)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote »</TD></TR><TR><TD CLASS="quote"> SMS Products
4747 Ewell Rd
Fredericksburg, VA 22408
SMSP Headers - Because diameter and length do make a difference
SMSP Exhausts - You don't have to be loud to make noise, email for the least expensive kit prices around
SMS Products now carries Honda/Acura Tranny Rebuild Kits with Synchros, Light Weight Flywheels, Mid and Hi Performance Clutches & Pressure Plates
OBDII California Compliant Cats Now Available
540-287-6384
smsproducts@adelphia.net
</TD></TR></TABLE>
I'd spring for a Car Sound instead (although Dave can make you either one). Do the environment a favor, and avoid the possibility of a multi-thousand dollar fine.
4747 Ewell Rd
Fredericksburg, VA 22408
SMSP Headers - Because diameter and length do make a difference
SMSP Exhausts - You don't have to be loud to make noise, email for the least expensive kit prices around
SMS Products now carries Honda/Acura Tranny Rebuild Kits with Synchros, Light Weight Flywheels, Mid and Hi Performance Clutches & Pressure Plates
OBDII California Compliant Cats Now Available
540-287-6384
smsproducts@adelphia.net
</TD></TR></TABLE>
I'd spring for a Car Sound instead (although Dave can make you either one). Do the environment a favor, and avoid the possibility of a multi-thousand dollar fine.
Trending Topics
#8
* B A N N E D *
Thread Starter
Join Date: May 2004
Location: SAN DIEGO CLAIREMONT, CA, 92117
Posts: 33,383
Likes: 0
Received 0 Likes
on
0 Posts
Re: 99 gsr jsut put in jdm 4-1 type r headers in what kind of test pipe do I use????? (01DC-2)
DO I NEED A 2.5 TO 2.25 CAT SINCE MY B PIPE IS USDM ITR ???
#9
Darth ModerVader
Re: 99 gsr jsut put in jdm 4-1 type r headers in what kind of test pipe do I use????? (TYPERman2001)
No, a properly made 2.5" cat (or test pipe) will bolt up to the ITR B-pipe. It would, however, be beneficial to remove the very restrictive bottle neck at the ITR cat/B-pipe flange and replace it with a tapered 2.5" -> 2.25" adapter.
#10
* B A N N E D *
Thread Starter
Join Date: May 2004
Location: SAN DIEGO CLAIREMONT, CA, 92117
Posts: 33,383
Likes: 0
Received 0 Likes
on
0 Posts
Re: 99 gsr jsut put in jdm 4-1 type r headers in what kind of test pipe do I use????? (Padawan)
where can i find a test pipe like this
so a 2.5 inch test pipe will fit my usdm itr b pipe???
i was thinkign of the j's racing test pipe on jhp.com
so a 2.5 inch test pipe will fit my usdm itr b pipe???
i was thinkign of the j's racing test pipe on jhp.com
#11
Darth ModerVader
Re: 99 gsr jsut put in jdm 4-1 type r headers in what kind of test pipe do I use????? (TYPERman2001)
Yes, a 2.5" test pipe will bolt to your exhaust, but will meet the severe bottle neck at the B-pipe flange. SMSP (the info I posted above) can construct a very high-quality one for you, but you can also most likly get a local muffler shop to fabricate one for you.
#12
* B A N N E D *
Thread Starter
Join Date: May 2004
Location: SAN DIEGO CLAIREMONT, CA, 92117
Posts: 33,383
Likes: 0
Received 0 Likes
on
0 Posts
Re: 99 gsr jsut put in jdm 4-1 type r headers in what kind of test pipe do I use????? (Padawan)
thanx for the advice kteller.com i jsut discovered has 2.5 inch test pipes for $60
#14
Honda-Tech Member
Join Date: Mar 2004
Location: So, Cal, usa
Posts: 2,008
Likes: 0
Received 0 Likes
on
0 Posts
Re: 99 gsr jsut put in jdm 4-1 type r headers in what kind of test pipe do I use????? (TYPERman2001)
i went to a muffler shop and they made/install for $40.
Thread
Thread Starter
Forum
Replies
Last Post
Azcheron
Acura Integra Type-R
6
06-17-2005 06:38 AM