Notices
Acura Integra All Integra Except ITR

92-93 integra: fuel probs!! motor is flooding-too much fuel=car wont start!! help

Thread Tools
 
Search this Thread
 
Old 10-14-2003, 05:29 PM
  #1  
Thread Starter
 
mycvc8u2's Avatar
 
Join Date: Jul 2002
Location: MORGANTOWN, WV, US OF A
Posts: 995
Likes: 0
Received 0 Likes on 0 Posts
Default 92-93 integra: fuel probs!! motor is flooding-too much fuel=car wont start!! help

SITUATION 93 civic cx with obd1 93 b18a motor, dizzy, ecu & 96 gsr trans

question1 i have a b&m regulator on the rail, sits on the right by the fuel return line. then on the left where the fuel line comes in there is this other regulator looking thing that has a phillips head screw on the top-what is that and what does it do?

the car throws no codes since swap(1 but i fixed it - ect in wrong plug). dizzy and coil and ignitor are good, so are wires. i cleaned the plugs on my bench since they flooded. then i individually checked spark to each plug and wire one by one-good spark. did compression tests and 150's across the board. so what the hell can the problem be? my buddy is a mechanic who helped with this and all my swaps, and we have been scratching our heads for like 2-3 nights. we were thinking of getting another rail like from a civic without that other regulator thing on the left and trying that? what do you think?

any help is appreciated-also, ask me questions if i was unclear in my explanation, i really gotta solve this. thanks guys
Old 10-14-2003, 06:29 PM
  #2  
Thread Starter
 
mycvc8u2's Avatar
 
Join Date: Jul 2002
Location: MORGANTOWN, WV, US OF A
Posts: 995
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 92-93 integra: fuel probs!! motor is flooding-too much fuel=car wont start!! help (mycvc8u2)

ttt
Old 10-14-2003, 09:26 PM
  #3  
 
Komsomol's Avatar
 
Join Date: Sep 2002
Location: niagara region, ON, Canada
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 92-93 integra: fuel probs!! motor is flooding-too much fuel=car wont start!! help (mycvc8u2)

Go to junkyard get a stock regulator since you had to cut yours up to do the b&m
upgrade. B&M also makes a fuel pressure guage which you mount on the fuel filter. Switch the b&m regulator back to stock and see if you still run rich.
The guage will let you see what the psi is if it is normal then its probably a sensor
problem or an injector problem.
Old 10-15-2003, 04:09 AM
  #4  
Thread Starter
 
mycvc8u2's Avatar
 
Join Date: Jul 2002
Location: MORGANTOWN, WV, US OF A
Posts: 995
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 92-93 integra: fuel probs!! motor is flooding-too much fuel=car wont start!! help (8400RPMS)

well i have another set of injectors, should i try those too? thanks

ps, i have the gauge, when i am cranking it is at about 45 psi
Old 10-17-2003, 04:22 AM
  #5  
Thread Starter
 
mycvc8u2's Avatar
 
Join Date: Jul 2002
Location: MORGANTOWN, WV, US OF A
Posts: 995
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 92-93 integra: fuel probs!! motor is flooding-too much fuel=car wont start!! help (mycvc8u2)

UPDATE
changed the fuel rail, reguator and injectors not once but twice last night. my buddy has massive amounts of ls swap parts and extras so he brought by some stuff. still same ****, turns but no start. going to try a different ecu later today. i still have fuel , good spark and compression, but no start?? any other ideas are appreciated at this time. thanks
Old 10-17-2003, 07:55 AM
  #6  
Honda-Tech Member
 
frogsr's Avatar
 
Join Date: Mar 2002
Location: SoCal
Posts: 1,320
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 92-93 integra: fuel probs!! motor is flooding-too much fuel=car wont start!! help (mycvc8u2)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mycvc8u2 &raquo;</TD></TR><TR><TD CLASS="quote">question1 i have a b&m regulator on the rail, sits on the right by the fuel return line. then on the left where the fuel line comes in there is this other regulator looking thing that has a phillips head screw on the top-what is that and what does it do?</TD></TR></TABLE>

that's the pulse dampener you're referring to. it's not a 'regulator' so to speak, so there's nothing to troubleshoot there...

Old 10-17-2003, 08:02 AM
  #7  
Thread Starter
 
mycvc8u2's Avatar
 
Join Date: Jul 2002
Location: MORGANTOWN, WV, US OF A
Posts: 995
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 92-93 integra: fuel probs!! motor is flooding-too much fuel=car wont start!! help (frogsr)

i just tried two other ecu's and same ****, turns but no start!! WTF!!! any other ideas? i am gonna put it on the rack later today and check to make sure all the plugs are in the right spots on the rear of the motor, as well as vacuums. thanks guys for all your help so far
Old 10-17-2003, 09:00 AM
  #8  
Junior Member
 
Dev90gs's Avatar
 
Join Date: Nov 2002
Location: Lebanon, OR, USA
Posts: 49
Likes: 0
Received 0 Likes on 0 Posts
Default

Im not too familular with civics but if you have an MFR (Main Fuel Relay) try replacing that... On the 90-93 tegs there behind the blinker side of the dash, almost directly behind the little change tray... Might give an idea where yours is...
HTH and G/L!!

Dev
Old 10-17-2003, 09:54 AM
  #9  
Thread Starter
 
mycvc8u2's Avatar
 
Join Date: Jul 2002
Location: MORGANTOWN, WV, US OF A
Posts: 995
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (Dev90gs)

hmm.. good idea.. will check... thanks
Old 10-31-2003, 07:10 AM
  #10  
 
Komsomol's Avatar
 
Join Date: Sep 2002
Location: niagara region, ON, Canada
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (mycvc8u2)

So what happened?
Old 11-02-2003, 04:10 AM
  #11  
Thread Starter
 
mycvc8u2's Avatar
 
Join Date: Jul 2002
Location: MORGANTOWN, WV, US OF A
Posts: 995
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (8400RPMS)

firing order-2 wires were reversed. it's easy to overlook that **** i guess..
Old 11-03-2003, 07:39 PM
  #12  
Honda-Tech Member
 
ITRfaithful's Avatar
 
Join Date: Mar 2002
Location: Saratoga, CA
Posts: 615
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (mycvc8u2)

that just means your injectors were just switched around?
Old 11-04-2003, 06:09 PM
  #13  
Thread Starter
 
mycvc8u2's Avatar
 
Join Date: Jul 2002
Location: MORGANTOWN, WV, US OF A
Posts: 995
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (iloveintegras)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by iloveintegras &raquo;</TD></TR><TR><TD CLASS="quote">that just means your injectors were just switched around?</TD></TR></TABLE>
no, it means that we had 2 of the wires switched on the distributor. it was firing in the wrong order. it's really easy to overlook the simple stuff.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
OrangeTeggy
Acura Integra
18
04-20-2015 07:33 AM
eccards
Honda Civic / Del Sol (1992 - 2000)
9
11-03-2010 07:59 PM
WestTxSR20
Honda Civic / Del Sol (1992 - 2000)
8
09-09-2010 05:12 AM
mycvc8u2
Honda Civic / Del Sol (1992 - 2000)
16
05-18-2004 07:03 AM
mycvc8u2
Tech / Misc
16
10-17-2003 08:09 AM



Quick Reply: 92-93 integra: fuel probs!! motor is flooding-too much fuel=car wont start!! help



All times are GMT -8. The time now is 01:49 AM.