Will a stock or Fluidyne radiator fit in a 94 civic with a h22 swap? I am looking @ the space and would like to know if I can ran a 1/2 radiator with an FAL Fan and not hit the slave cycinder for the clucth. Any info would be great.

 

I always run a half radiator with that swap.The stock one works fine,though if you are autocrossing you may want to run a del sol vtec or aftermarket radiator.You should use a fal or equivalent thinner fan.

 

So, the half radiator and fan shord does not hit the slave?

 

I dont think the stock fan will work.Ive never tried as there isnt much room and customers always brought in the fal fan.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ares650 &raquo;</TD></TR><TR><TD CLASS="quote">So, the half radiator and fan shord does not hit the slave?</TD></TR></TABLE>

It will clear. You wont have any problems with shoad to slave clearances

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by slrh22hatch &raquo;</TD></TR><TR><TD CLASS="quote">

It will clear. You wont have any problems with shoad to slave clearances </TD></TR></TABLE>

Stock Rad with FAL Fan, right???????

Thanks for the info

 

i had a h22 in a 94 si w/ stock radiator and stock fan.... it fit but it appeared the stock fan had been trimmed down in a spot or 2 where it would have hit... it didnt effect the fan at all besides the appearance of it. . . so if $ is tight u can get away with it . . if u got the $ get the fal or a spal.

 

Thanks Guys!!!!!!