on greddy site it shows the one piece to be 99-00 si. I got this header and was told it was for 92-95 civics. My question is, are b16's the only greddy civic one piece header?

if these are for b16, i can also use it on b18b right?


Modified by sohcSUCKS at 10:50 PM 9/11/2004

 

bump, need to keep or sell asap. Anybody know?

 

ive never heard of a 2 piece header, show me what it looks like

 

you should beable to bolt it to the motor and it should fit right on the exhaust

 

lol never seen a 2 piece header? anybody else have any info search didnt answer my question.

 

bump!

are there any ways to tell if the header i got is for say a b16, b18, or d16?
one piece header btw

 

a b series header will not fit a d series motor. if you have a 1 piece, it is for the b series engines. the d series engine header is a 2 piece design. its made that way for easier install. your header will fit all b series motors at the head, but the o2 location and flange clocking will be different.

 

any way to measure it anywhere to make sure what b series motor it was made for?

 

if it is for a LS or SI, it should have a o2 bung on the header. the GSR header should have no o2 bung... as far as the clocking goes, i'm not really all that sure.

 

BUMP old thread

cleaning garage and still have it.

anybody know any for sure ways to tell if its for a b16 or b18b?

the guy i got it from said it was out of a 92-95 civic but i dont know what swap was a long time ago. I am sure it was a b series though. anybody know the clocking angle of the flange for b16 and b18b?

 

How much do you want for the header? a b16 header would have a hard time fitting on a b18 block because the b18 is taller.

 

i dont own anything with a bseries so i cant test fit it. if possible i'd rather sell it local, shipping would be expensive

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mtownek9 &raquo;</TD></TR><TR><TD CLASS="quote">How much do you want for the header? a b16 header would have a hard time fitting on a b18 block because the b18 is taller.</TD></TR></TABLE>

x2

B18 headers will fit B16 motors.

B16 headers will NOT fit B18 motors.

 

anybody know the runner length from exhaust port to bottum of the block so that i can measure mine and sell the header with a definate answer? i dont want to sell it as a b16 header if its for b18b

 

take a picture for me. it's pretty easy to tell if it's 1.6L deck height or 1.8L.

 

hope thats good enough and thanks for the help

 

can you take a picture from the side? it also might help to hold up a measuring tape.

 

those are old pics of it, im trying to recover my imagestation password

will post new pics later today or tomorrow

 

ok some new pics and new host since imagestation is closing soon.
Im guessing its a b16, it seems alittle short to be b18b

 

so how much do you want for it?

 

i'd rather sell it local, i dont have a decent box to ship it in either.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sohcSUCKS &raquo;</TD></TR><TR><TD CLASS="quote"> i dont have a decent box to ship it in either.
</TD></TR></TABLE>

ups will take care of that for you

 

how much u want?

 

grave digging ftw... i've been looking at buying a greddy 421 since i bought my civic, question is does it replace/displace the cat in any way? I'd like to know whether i should include a test pipe in my exhaust system purchase. and since tax returns are coming soon i figured what better time to buy it. lemme know.

 

i got greddy header and mines is for ls cause mines is also 4 2 1 one peice but my collector flange is clocked differently then yours, you wanna trade? cause it doesn't line up with my piping and i don't wanna get it fixed at the muffler shop.