All D16 piston rings created equal?
Thread Starter
Joined: Jan 2004
Posts: 1,055
Likes: 0
From: Texas, USA
All D16 piston rings created equal?
i just rebuit a d16z6 and reuse my d16a6 piston rings (blew the a6 right after rebuild) because i thought they were the same size.
they fit just fine in the pistons; i didnt check any clearances on the rings on the z6 but i did on the a6.
now my question is; are the rings for the z6 the same size as the a6 rings? i dont know why i thought of this but it just occured to me that they might not be and that scares me.
btw the a6 is from a 90 civic si and the z6 is out of a 94 civic si
they fit just fine in the pistons; i didnt check any clearances on the rings on the z6 but i did on the a6.
now my question is; are the rings for the z6 the same size as the a6 rings? i dont know why i thought of this but it just occured to me that they might not be and that scares me.
btw the a6 is from a 90 civic si and the z6 is out of a 94 civic si
Thread
Thread Starter
Forum
Replies
Last Post
dreadhead89
All Motor / Naturally Aspirated
10
Dec 31, 2009 10:38 AM
4DRmafia
Honda CRX / EF Civic (1988 - 1991)
4
Apr 17, 2009 08:49 PM
Blanket Jackson
Honda Civic / Del Sol (1992 - 2000)
4
Dec 4, 2004 07:20 AM
