Greddy profect B boost controller install I searched
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Oct 2002
Posts: 1,863
Likes: 0
From: the sleeper is sleeping, US
Greddy profect B boost controller install I searched
how to install this boost controller
i checked the greddy site and they updated their site
and i dont see the tech help there.
anyone know how to install and how to set the settings for 8psi ?
i checked the greddy site and they updated their site
and i dont see the tech help there.
anyone know how to install and how to set the settings for 8psi ?
Honda-Tech Member
Joined: Mar 2002
Posts: 14,296
Likes: 1
From: Charleston, SC
Re: Greddy profect B boost controller install I searched (GReddy SI)
If memory serves corrrect, set your gain for .55 and set your initial duty gain at 10-15%. If you drop boost, up your duty gain. If you spike, lower it. Set your warning for about .56-.6. You may have to play with the gain and duty gain settings until you get a nice constant boost. You can always lower the gain and increase the duty % gain to increase the amount of boost being created.
I also noticed they changed their site around. Lucky you.
I also noticed they changed their site around. Lucky you.
Honda-Tech Member
Joined: May 2001
Posts: 12,063
Likes: 0
From: Spokane, WA
Re: Greddy profect B boost controller install I searched (GReddy SI)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GReddy SI »</TD></TR><TR><TD CLASS="quote">anyone know how to install it ?
</TD></TR></TABLE>
i would like to know too...
</TD></TR></TABLE>
i would like to know too...
Trending Topics
Joined: Aug 2002
Posts: 946
Likes: 0
From: Stockton, IL, 61085
Re: Greddy profect B boost controller install I searched (SPOON_BeIgHtEeNsEe)
Ok here ya go...
Run the wires through to your engine bay, the one that comes off of the filter goes to a Y that splits off on your fuel rail (FPR / Intake Manifold).
The other 2 hoses that come off the black box.
The left side goes to a vac source, the right port goes to the side of your wastegate.
Then the top port of your wastegate to a vac source.
Power and ground it and your done mang.
hah!
Run the wires through to your engine bay, the one that comes off of the filter goes to a Y that splits off on your fuel rail (FPR / Intake Manifold).
The other 2 hoses that come off the black box.
The left side goes to a vac source, the right port goes to the side of your wastegate.
Then the top port of your wastegate to a vac source.
Power and ground it and your done mang.
hah!
Joined: Jan 2003
Posts: 4,887
Likes: 0
From: santa ana, ca, USA
Re: Greddy profect B boost controller install I searched (phreakmang)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by phreakmang »</TD></TR><TR><TD CLASS="quote">Ok here ya go...
Run the wires through to your engine bay, the one that comes off of the filter goes to a Y that splits off on your fuel rail (FPR / Intake Manifold).
The other 2 hoses that come off the black box.
The left side goes to a vac source, the right port goes to the side of your wastegate.
Then the top port of your wastegate to a vac source.
Power and ground it and your done mang.
hah!</TD></TR></TABLE>
so none of the tubes goes to the turbo housing? i have mine installed while back took the hoses off now i have different setup and i forgot how to put it all the tubes back lol..
Run the wires through to your engine bay, the one that comes off of the filter goes to a Y that splits off on your fuel rail (FPR / Intake Manifold).
The other 2 hoses that come off the black box.
The left side goes to a vac source, the right port goes to the side of your wastegate.
Then the top port of your wastegate to a vac source.
Power and ground it and your done mang.
hah!</TD></TR></TABLE>
so none of the tubes goes to the turbo housing? i have mine installed while back took the hoses off now i have different setup and i forgot how to put it all the tubes back lol..
Junior Member
Joined: Jan 2004
Posts: 594
Likes: 0
From: omaha, ne, usa
could sumone send me tha wiring diagram also my email is kraisant@aol.com
i have mine hooked up but i dont think its right
i have top of wg to the black box, and side of wastegate to y tee and it goes to intake mani vac source and other goes ta box
i have mine hooked up but i dont think its right
i have top of wg to the black box, and side of wastegate to y tee and it goes to intake mani vac source and other goes ta box
Joined: Aug 2002
Posts: 946
Likes: 0
From: Stockton, IL, 61085
Re: (Toda Party)
hm....the actual booklet shows to hook up
side port or wg to vac, top port to what is labeled (3) in the diagram.
then (2) going to the vac also.
how would you hook it up to the charge pipe, and what would that do besides give vac?
side port or wg to vac, top port to what is labeled (3) in the diagram.
then (2) going to the vac also.
how would you hook it up to the charge pipe, and what would that do besides give vac?
Joined: Jan 2003
Posts: 4,887
Likes: 0
From: santa ana, ca, USA
Re: (phreakmang)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by phreakmang »</TD></TR><TR><TD CLASS="quote">hm....the actual booklet shows to hook up
side port or wg to vac, top port to what is labeled (3) in the diagram.
then (2) going to the vac also.
how would you hook it up to the charge pipe, and what would that do besides give vac?</TD></TR></TABLE>
see i knew it one goes on the fitting on the turbo
side port or wg to vac, top port to what is labeled (3) in the diagram.
then (2) going to the vac also.
how would you hook it up to the charge pipe, and what would that do besides give vac?</TD></TR></TABLE>
see i knew it one goes on the fitting on the turbo
Member
Joined: Jun 2001
Posts: 1,057
Likes: 1
From: Not from Houston
Re: (phreakmang)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by phreakmang »</TD></TR><TR><TD CLASS="quote">that picture is not showing it going to one of the ports on the turbo</TD></TR></TABLE>
The part labeled "charge pipe' is going to be the same as the port on the turbo. Follow the pic it works.
The part labeled "charge pipe' is going to be the same as the port on the turbo. Follow the pic it works.
Joined: Jan 2003
Posts: 4,887
Likes: 0
From: santa ana, ca, USA
Re: (phreakmang)
it'll be easier if u explain in or out. cuz people mount their profec boxes different mines hidden somewhere and dont know which one is left or right lol. if u can explain in and out i would know thanks man.
for some reason one of my tubes that goes to the wastegate or turbo is t'd off to vacuum
for some reason one of my tubes that goes to the wastegate or turbo is t'd off to vacuum