This http://www53.ssldomain.com/fas...g1175 kit comes with 4 piston calipers and 11.75" rotors and fits 92-95 civics for $1400

This http://www53.ssldomain.com/fas...F11-4 kit comes with what appears to be the same identical thing except it has 11" rotors. and is $500 less

so are you paying $500 more for .75 more inches? or are they leaving out substantial info? thier site has a basic generic desciription for all thier stuff so I wouldnt be surprised.

 

The more expensive kit comes with Willwood calipers and the less expensive kit just says "Forged Aluminum Calipers". It doesn't say who makes the calipers for the cheaper kit, and the pic doesn't really help much??

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nonsense &raquo;</TD></TR><TR><TD CLASS="quote">The more expensive kit comes with Willwood calipers and the less expensive kit just says "Forged Aluminum Calipers". It doesn't say who makes the calipers for the cheaper kit, and the pic doesn't really help much?? </TD></TR></TABLE>


both kits are wilwood....one is the dyna light caliper one is the better bigger wilwood caliper!

 

The 11.75" kit probably has 2 piece rotors, which save many pounds of unsprung weight, but can get a little pricey. The 11" kit looks like it has one piece cast rotors, so they will be heavier than the 11.75" rotors.

The 11" kit has forged Dynalite calipers - good stuff. Pics aren't showing up for the 11.75" kit, but all 4 pot Wilwood calipers are excellent IMO.

 

Dave Turner Motorsports has created a special Wilwood kit for about $1K, multi-piece rotor, made specifically for Honda race application. We use it in our WCHC H1 Civic EK, and I gotta say, the brakes are great! (I was a bit skeptical at first) I gotta a pic I might be able to post...

Oh, and the pads are cheeeeeep, and work awesome. (about $50. A nice savings over the $100-150 pads I used to buy)

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by D.CACO &raquo;</TD></TR><TR><TD CLASS="quote">Dave Turner Motorsports has created a special Wilwood kit for about $1K, multi-piece rotor, made specifically for Honda race application. We use it in our WCHC H1 Civic EK, and I gotta say, the brakes are great! (I was a bit skeptical at first) I gotta a pic I might be able to post...

Oh, and the pads are cheeeeeep, and work awesome. (about $50. A nice savings over the $100-150 pads I used to buy)</TD></TR></TABLE>

I didnt find anything on thier site http://www.daveturner.com/

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by chad &raquo;</TD></TR><TR><TD CLASS="quote">


both kits are wilwood....one is the dyna light caliper one is the better bigger wilwood caliper!</TD></TR></TABLE>

yeah I think thats it. the new billet dynapro has in dust seals in thecaliper making it better on the street. I wonder how much more it weights than teh dynalite. the dynalite is 2.5lbs

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostage &raquo;</TD></TR><TR><TD CLASS="quote">

I didnt find anything on thier site http://www.daveturner.com/</TD></TR></TABLE>

Thay have a shop- you have to call them, Tim would be happy to help you and ask him about the "Honda Challenge" set up.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by chad &raquo;</TD></TR><TR><TD CLASS="quote">both kits are wilwood....one is the dyna light caliper one is the better bigger wilwood caliper!</TD></TR></TABLE>

ah ha thanks for clearing that up

Steve

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by D.CACO &raquo;</TD></TR><TR><TD CLASS="quote">Dave Turner Motorsports has created a special Wilwood kit for about $1K, multi-piece rotor, made specifically for Honda race application. We use it in our WCHC H1 Civic EK, and I gotta say, the brakes are great! (I was a bit skeptical at first) I gotta a pic I might be able to post...
</TD></TR></TABLE>

pictures?

 

Fresh outta the box.



Dave Turner's Honda Challenge SGR Big Brake Kit (front):
Only $650.00 !!!!!
Civic 90-01/Integra 94-01 (4 x 100)
4 Piston Aluminum Caliper
12.19" GT 2 piece Rotor w/directional veins (16 inch or larger wheels needed)
Aluminum Hat
Wilwood Racing Brake Pads (Which work great and are only $61 to replace... yes $61)

Ask for Tim and tell him TEAM SGR sent ya!


Dave Turner Motor Sports
5555 Magnatron Blvd.· San Diego, CA 92111
E-Mail : speed@daveturner.com
tel 858.571.3811 - fax 858.571.2859


Modified by D.CACO at 4:08 PM 6/23/2004


Modified by D.CACO at 4:09 PM 6/23/2004

 

do they make this for a 5 lug application?

 

Nice....

Looks pretty light weight too!

all of that for under a G?

How big are the rotors and what size rims do you have to run to clear the calipers?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ITRacer121 &raquo;</TD></TR><TR><TD CLASS="quote">do they make this for a 5 lug application?</TD></TR></TABLE>
I would also like to know this

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jon V &raquo;</TD></TR><TR><TD CLASS="quote">Nice....

Looks pretty light weight too!

all of that for under a G?
</TD></TR></TABLE>

Hows this for a deal??

Dave Turner's Honda Challenge SGR Big Brake Kit (front):
Only $650.00 !!!!!
Civic 90-01/Integra 94-01 (4 x 100)
4 Piston Aluminum Caliper
12.19" GT 2 piece Rotor w/directional veins (16 inch or larger wheels needed)
Aluminum Hat
Wilwood Racing Brake Pads (Which work great and are only $61 to replace... yes $61)

Ask for Tim and tell him TEAM SGR sent ya!

Dave Turner Motor Sports
5555 Magnatron Blvd.· San Diego, CA 92111
E-Mail : speed@daveturner.com
tel 858.571.3811 - fax 858.571.2859



Modified by D.CACO at 12:27 PM 6/24/2004

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by D.CACO &raquo;</TD></TR><TR><TD CLASS="quote">

Hows this for a deal??

Dave Turner's Honda Challenge SGR Big Brake Kit (front):
Only $650.00 !!!!!
Civic 90-01/Integra 94-01 (4 x 100)
4 Piston Aluminum Caliper
12.19" GT 2 piece Rotor w/directional veins (16 inch or larger wheels needed)
Aluminum Hat
Wilwood Racing Brake Pads (Which work great and are only $61 to replace... yes $61)

Ask for Tim and tell him TEAM SGR sent ya!
</TD></TR></TABLE>

No number or link or anything?

also do you know if they make a 5 lug application?

 

Well, I guess I should chime in.....

If you would like more info on the kit please give me a call at the store, the number is in my sig, shoot me an email, or pm. Don't forget to mention Team SGR or Honda Tech, that way I can give you the discount.

There are basically 3 kits available:

1: street kit, plain rotor
2. street kit, drilled and slotted rotor
3. Dave Turner race kit

For pictures of the street kits go to http://www.wilwood.com. The race kit is the one pictured; Thank You Dennis!!!! The only other thing you need to make it a complete bolt on is lines. Which I have.

If there is enough interest, I will consider a group buy.

 

One more thing..... I am checking into the 5 lug kit. There is a kit for the 02 RSX which is five lug. I will let you guys know if it will work for the ITR 5 lug.

 

Just heard back from wilwood and the RSX kit will work for the ITR.

 

So they make the Dave Turner race kit for the RSX?

and that is 5x114.3 ?

and what kind of lines do you have to use?

You can't beat this for $650
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by D.CACO &raquo;</TD></TR><TR><TD CLASS="quote">
Dave Turner's Honda Challenge SGR Big Brake Kit (front):
Only $650.00 !!!!!
Civic 90-01/Integra 94-01 (4 x 100)
4 Piston Aluminum Caliper
12.19" GT 2 piece Rotor w/directional veins (16 inch or larger wheels needed)
Aluminum Hat
Wilwood Racing Brake Pads (Which work great and are only $61 to replace... yes $61)

Ask for Tim and tell him TEAM SGR sent ya!

Dave Turner Motor Sports
5555 Magnatron Blvd.· San Diego, CA 92111
E-Mail : speed@daveturner.com
tel 858.571.3811 - fax 858.571.2859
</TD></TR></TABLE>

I would assume all the pieces would be the same for the RSX kit

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jon V &raquo;</TD></TR><TR><TD CLASS="quote">So they make the Dave Turner race kit for the RSX</TD></TR></TABLE>

Yes, I can make a RSX kit to our race spec.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jon V &raquo;</TD></TR><TR><TD CLASS="quote">and that is 5x114.3 ?</TD></TR></TABLE>

It will be same bolt pattern as RSX, which I believe is 5x114.3.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jon V &raquo;</TD></TR><TR><TD CLASS="quote">and what kind of lines do you have to use?</TD></TR></TABLE>

For brake lines you need to go from a female metric(stock hardline) to a male 1/8 npt(inlet of wilwood caliper).

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jon V &raquo;</TD></TR><TR><TD CLASS="quote">You can't beat this for $650 </TD></TR></TABLE>


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jon V &raquo;</TD></TR><TR><TD CLASS="quote">I would assume all the pieces would be the same for the RSX kit</TD></TR></TABLE>

The majority of parts are the same, biggest difference would be the hats and brackets, to acccomodate for the 5 lug and different hub.

 

I love our willwood race brakes!

 

would that 12.19" kit fit under 15" gram lights?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 90civichbsi &raquo;</TD></TR><TR><TD CLASS="quote">would that 12.19" kit fit under 15" gram lights?</TD></TR></TABLE>

I'm guessing not since it says 16" required there in bold in D.CACO's post:

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by D.CACO &raquo;</TD></TR><TR><TD CLASS="quote">Fresh outta the box.

Dave Turner's Honda Challenge SGR Big Brake Kit (front):
Only $650.00 !!!!!
Civic 90-01/Integra 94-01 (4 x 100)
4 Piston Aluminum Caliper
12.19" GT 2 piece Rotor w/directional veins (16 inch or larger wheels needed)
Aluminum Hat
Wilwood Racing Brake Pads (Which work great and are only $61 to replace... yes $61)

Ask for Tim and tell him TEAM SGR sent ya!


Dave Turner Motor Sports
5555 Magnatron Blvd.· San Diego, CA 92111
E-Mail : speed@daveturner.com
tel 858.571.3811 - fax 858.571.2859
</TD></TR></TABLE>

Still intriguing and a great deal none the less.

 

wow, that's great!

i just think that'd be overkill on my CRX.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Driven &raquo;</TD></TR><TR><TD CLASS="quote">wow, that's great!

i just think that'd be overkill on my CRX. </TD></TR></TABLE>

well you would lose some weight over the front..and I don't think it would be overkill..